Numerical simulation of matrix reinforced composite materials subjected to compression loads

Archives of Computational Methods in Engineering

Volumn 16, Issue 4, 2009, Pages 357-397

  Martinez, Xavier ^a   Oller, Sergio ^b  

^a INTERNATIONAL CENTER FOR NUMERICAL METHODS IN ENGINEERING CIMNE   (Spain)

^b UNIVERSITAT POLITÈCNICA DE CATALUNYA   (Spain)

Author keywords

[No Author keywords available]

Indexed keywords

BUCKLING MODE; COMPOSITE CONSTITUENTS; COMPRESSION FORCE; COMPRESSION LOADS; COMPRESSION STRENGTH; EXPERIMENTAL TEST; FINITE ELEMENT CODES; FINITE ELEMENT SIMULATIONS; HOMOGENIZATION PROCEDURE; LONG FIBER COMPOSITES; MAIN PARAMETERS; MATRIX; MATRIX SHEARS; MECHANICAL PERFORMANCE; MIXING THEORY; NUMERICAL RESULTS; NUMERICAL SIMULATION; REINFORCED COMPOSITE MATERIALS;

ALIGNMENT; COMPOSITE MATERIALS; COMPOSITE MICROMECHANICS; COMPUTER SIMULATION; CONSTITUTIVE EQUATIONS; FAILURE ANALYSIS; FIBERS; MECHANICAL PROPERTIES; NUMERICAL ANALYSIS; SHEAR STRENGTH;

BUCKLING;

ALIGNMENT; BUCKLING; COMPOSITES; COMPRESSION STRENGTH; FIBERS; MECHANICAL PROPERTIES; SHEAR STRENGTH; SIMULATION;

EID: 77952875270     PISSN: 11343060     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11831-009-9036-3     Document Type: Article

References (68)

1. Rosen B (1965) Fibre composite materials. Am Soc Metals, Metals Park, pp 37-45.
2. Rastellni F, Oller S, Salomon O, Oñate E (2008) Composite materials non-linear modelling for long fibre reinforced laminates: Continuum basis, computational aspects and validations. Comput Struct 86(9): 879-896.
3. Barbero EJ, Tomblin JS (1996) A damage mechanics model for compression strength of composites. Int J Solids Struct 33(29): 4379-4393.
4. Tomblin JS, Barbero EJ, Godoy LA (1997) Imperfection sensitivity of fiber micro-buckling in elastic-nonlinear polymer-matrix composites. Int J Solids Struct 34(13): 1667-1679.
5. Welsh JS, Adams DF (1997) An experimental investigation of the mini-sandwich laminate as used to obtain unidirectional composite compression strengths. J Compos Mater 31(3): 293-314.
6. Barbero EJ (1998) Prediction of compression strength of unidirectional polymer matrix composites. J Compos Mater 32(5): 483-502.
7. Balacó de Morais A (1996) Modelling lamina longitudinal compression strength of carbon fibre composite laminates. J Compos Mater 30(10): 1115-1131.
8. Balacó de Morais A, Torres Marques A (1997) A micromechanical model for the prediction of the lamina longitudinal compression strength of composite laminates. J Compos Mater 31(14): 1397-1412.
9. Balacó de Morais A (2000) Prediction of the layer longitudinal compression strength. J Compos Mater 34(21): 1808-1820.
10. Drapier S, Grandidier JC, Potier-Ferry M (1999) Towards a numerical model of the compressive strength for long fibre composites. Eur J Mech A, Solids 18(1): 69-92.
11. Drapier S, Grandidier JC, Potier-Ferry M (2001) A structural approach of plastic microbuckling in long fibre composites: comparison with theoretical and experimental results. Int J Solids Struct 38(22-23): 3877-3904.
12. Parnes R, Chiskis A (2002) Buckling of nano-fibre reinforced composites: a re-examination of elastic buckling. J Mech Phys Solids 50(4): 855-879.
13. Akbarov SD, Kosker R (2001) Fiber buckling in a viscoelastic matrix. Mech Compos Mater 37(4): 299-306.
14. Kosker R, Akbarov SD (2003) Influence of the interaction between two neighboring periodically curved fibres on the stress distribution in a composite material. Mech Compos Mater 39(2): 165-176.
15. Jochum C, Grandidier JC (2004) Microbuckling elastic modelling approach of a single carbon fibre embedded in an epoxy matrix. Compos Sci Technol 64(16): 2441-2449.
16. Puig JM, Car E, Oller S (2001) Solution for the inelastic buckling of long fibre reinforced composite materials. In: Figuieras J, Juvanades L, Farias R, Balkema A (eds) CCC 2001-Composites in construction international conference, pp 119-124.
17. Sánchez-Palencia E (1987) Homogenization techniques for composite media. In: Boundary layers and edge effects in composites. Springer, Berlin, pp 121-192.
18. Oller S, Miquel J, Zalamea F (2005) Composite material behaviour using a homogenization double scale method. J Eng Mech 131(1): 65-79.
19. Gónzalez C, Llorca J (2007) Mechanical behavior of unidirectional fiber-reinforced polymers under transverse compression: Microscopic mechanisms and modeling. Compos Sci Technol 67(5): 2795-2806.
20. Zalamea F (2001) Tratamiento numérico de materiales compuestos mediante la teoría de homogeneización. Ph. D. thesis, Departament de Resistència de Materials i Estructures a l'Enginyeria (RMEE)-UPC. Directors: Juan Miquel Canet and Sergio Oller.
21. Car E, Zalamea F, Oller S, Miquel J, Oñate E (2002) Numerical simulation of fiber reinforced composites-two procedures. Int J Solids Struct 39(7): 1967-1986.
22. Trusdell C, Toupin R (1960) The classical field theories. Handbuch der Physik, vol. 3(1). Springer, Berlin.
23. Ortiz M, Popov E (1957) A physical model for the inelasticity of concrete. Proc R Soc Lond, Ser A 383: 101-125.
24. Ortiz M, Popov E (1982) Plain concrete as a composite material. Mech Mater 1: 139-150.
25. Green A, Naghdi P (1965) A dynamical theory of interacting continua. J Eng Sci 3: 231-241.
26. Oller S, Oñate E, Miquel J, Botello S (1996) A plastic damage constitutive model for composite materials. Int J Solids Struct 33(17): 2501-2518.
27. Car E (2000) Modelo constitutivo continuo para el estudio del comportamiento mecánico de los materiales compuestos. Ph. D. thesis, Departament de Resistència de Materials i Estructures a l'Enginyeria (RMEE)-UPC. Directors: Sergio Oller and Eugenio Oñate.
28. Malvern LE (1968) Introduction to the mechanics of a continuous medium. Prentice-Hall, Englewood Cliffs.
29. Lubliner J (1990) Plasticity theory. MacMillan & Co., New York.
30. Oller S (2002) Dinámica no-lineal. CIMNE (Centro Internacional de Métodos Numéricos en Ingeniería), Barcelona.
31. Car E, Oller S, Oñate E (2000) An anisotropic elasto plastic constitutive model for large strain analysis of fiber reinforced composite materials. Comput Methods Appl Mech Eng 185(2-4): 245-277.
32. Car E, Oller S, Oñate E (2001) A large strain plasticity model for anisotropic materials-composite material application. Int J Plast 17(11): 1437-1463.
33. Oller S, Neamtu L, Oñate E (1995) Una generalización de la teoría de mezclas clásica para el tratamiento de compuestos en serie/paralelo. In: París F, Cañas J (eds) MATCOMP 95, pp 433-438.
34. Neamtu L, Oller S, Oñate E (1997) A generalized mixing theory elasto-damage-plastic model for finite element analysis of composites. In: Owen D, Oñate E, Hinton E (eds) Complas V-Computational plasticity, pp 1-5.
35. Rastellini F, Oller S, Salomon O, Oñate E (2003) Advanced serial-parallel mixing theory for composite materials analysis. Continuum basis and finite element applications. In: Oñate E, Owen D (eds) COMPLAS 2003-Proceeding CD of the VII international conference on computational plasticity.
36. Salomon O, Rastellini F, Oller S, Oñate E (2005) Fatigue prediction for composite materials and structures. In: Research N, technology organisation (RTO) (eds) Air vehicle technology: AVT-121. Symposium on the evaluation, control and prevention of high cycle fatigue.
37. Rastellini F (2006) Numerical modelling of the constitutive non-linearity of composite laminates. Ph. D. thesis, Departament de Resistència de Materials i Estructures a l'Enginyeria (RMEE)-UPC. Directors: Sergio Oller and Eugenio Oñate.
38. Martínez X, Oller S, Rastellini F, Barbat A (2008) A numerical procedure simulating RC structures reinforced with FRP using the serial/parallel mixing theory. Comput Struct 86(15-16): 1604-1618.
39. Martínez X, Oller S, Barbero E (2008) Study of delamination in composites by using the serial/parallel mixing theory and a damage formulation. In: Mechanical response of composites. Computational methods in applied sciences. Springer, Berlin.
40. CIMNE: PLCd Manual. Non-linear thermomechanic finite element code oriented to PhD student education (1991-2008). Finite element code developed at CIMNE.
41. Oller S, Oñate E, Oliver J, Lubliner J (1990) Finite element non-linear analysis of concrete structures using a plastic-damage model. Eng Fract Mech 35(1-3): 219-231.
42. Lubliner J, Oliver J, Oller S, Oñate E (1989) A plastic-damage model for concrete. Int J Solids Struct 25(3): 299-326.
43. Barbat AH, Oller S, Oñate E, Hanganu A (1997) Viscous damage model for Timoshenko beam structures. Int J Solids Struct 34(30): 3953-3976.
44. Mata P, Oller S, Barbat AH (2007) Static analysis of beam structures under nonlinear geometric and constitutive behaviour. Comput Methods Appl Mech Eng 196(45-48): 4458-4478.
45. Mata P, Oller S, Barbat AH (2008) Dynamic analysis of beam structures considering geometric and constitutive nonlinearity. Comput Methods Appl Mech Eng 197(6-8): 857-878.
46. Jones RM (1999) Mechanics of composite materials, 2nd edn. Taylor & Francis, Philadelphia.
47. Timoshenko SP, Gere JM (1961) Theory of elastic stability, international student edn. McGraw-Hill, Tokyo.
48. Lo KH, Chim ESM (1992) Compressive strength of unidirectional composites. J Reinf Plast Compos 11(8): 838-896.
49. Xu YL, Reifsnider KL (1993) Micromechanical modeling of composite compressive strength. J Compos Mater 27(6): 558-572.
50. Yurgartis SW (1987) Measurement of small angle fiber misalignment in continuous fiber composites. Compos Sci Technol 30(4): 279-293.
51. Paluch B (1996) Analysis of geometric imperfections affecting the fibers in unidirectional composites. J Compos Mater 30(4): 454-485.
52. Clarke AR, Archenhold G, Davidson NC (1995) A novel technique for determining the 3d spatial distribution of glass fibers in polymer composites. Compos Sci Technol 55(1): 75-91.
53. Wisnom M (2000) Size effects in Composites. In: Comprehensive composite materials, vol 5. Test methods, nondestructive evaluation and smart materials. Elsevier, London, pp 23-47.
54. Grandidier JC, Ferron G, Potier-Ferry M (1992) Microbuckling and strength in long-fiber composites: theory and experiments. Int J Solids Struct 29(14-15): 1753-1761.
55. Guz AN, Lapusta YN (1999) Three-dimensional problems of the near-surface instability of fiber composites in compression (model of a piecewise-uniform medium)(survey). Int Appl Mech 35(7): 641-670.
56. Puig JM, Car E, Oller S (2002) Solución numérica para el pandeo inelástico de materiales compuestos reforzados con fibras largas. In: Análisis y cálculo de estructuras de materiales compuestos. CIMNE (Centro Internacional de Métodos Numéricos en Ingeniería), Barcelona, pp 295-320.
57. Kachanov LM (1986) Introduction to continuum damage mechanics. Mechanics of elastic stability. Nijhoff, Dordrecht.
58. Oliver J, Cervera M, Oller S, Lubliner J (1990) Isotropic damage models and smeared crack analysis of concrete. In: Mang H, Bicánić N (eds) Second international conference on computer aided analysis and design of concrete structures, pp 945-958.
59. Oller S (2003) Simulación numérica del comportamiento mecánico de los materiales compuestos. CIMNE (Centro Internacional de Métodos Numéricos en Ingeniería), Barcelona.
60. Naik NK, Tiwari SI, Kumar RS (2003) An analytical model for compresssive strength of plain wave fabric composites. Compos Sci Technol 63(5): 609-625.
61. Wang W, Shenoi RA (2004) Analytical solutions to predict flexural behaviour of curved sandwich beams. J Sandw Struct Mater 6: 199-216.
62. Hetényi M (1971) Beams on elastic foundation. Theory with applications in the field of civil and mechanical engineering. The University of Michigan Press, Ann Arbor.
63. Oller S (2001) Fractura mecánica. Un enfoque global. CIMNE (Centro Internacional de Métodos Numéricos en Ingeniería), Barcelona.
64. Timoshenko SP (1940) Strength of materials. Part I. Elementary theory and problems. van Nostrand, New York.
65. Martínez X, Oller S, Barbat A, Rastellini F (2007) New procedure to calculate compression strength of FRP using the serial/parallel mixing theory. In: FRPRCS-8-8th international symposium on fiber reinforced polymer reinforcement for concrete structures.
66. Timoshenko SP (1940) Strength of materials. Part II. Advanced theory and problems. van Nostrand, New York.
67. Martínez X (2008) Micro-mechanical simulation of composite materials using the serial/parallel mixing theory. Ph. D. thesis, Departament de Resistència de Materials i Estructures a l'Enginyeria (RMEE)-UPC. Director: Sergio Oller.
68. Hoffman JD (2001) Numerical methods for scientists and engineers. Dekker, New York.