Three-dimensional finite element analysis of temperatures and stresses in wide-band laser surface melting processing

Materials and Design

Volumn 31, Issue 7, 2010, Pages 3366-3373

  Li, Chaowen ^a   Wang, Yong ^a   Zhan, Huanxiao ^b   Han, Tao ^a   Han, Bin ^a   Zhao, Weimin ^a  

^a CHINA UNIVERSITY OF PETROLEUM   (China)

^b Institute of Pumping Unit   (China)

Author keywords

Laser surface melting; Residual stress; Temperature fields; Wide band heat source

Indexed keywords

COMPUTATIONAL PROCEDURES; COMPUTATIONAL RESULTS; CONTINUOUS WAVE; EXPERIMENTAL MEASUREMENTS; EXPERIMENTAL VERIFICATION; FINITE ELEMENT ANALYSIS; HEAT SOURCES; HEAT TRANSFER ANALYSIS; LASER SCANNING SPEED; LASER SURFACE MELTING; MATERIAL PROPERTY; MECHANICAL ASPECTS; MELTING TEMPERATURES; METALLURGICAL TRANSFORMATION; PRODUCTION GOALS; SERVICE PERFORMANCE; SIMULATION RESULT; STEEL COMPONENTS; STRESS FIELD; SYSWELD; TEMPERATURE DEPENDENT; TEMPERATURE HISTORY; THERMO-MECHANICAL ANALYSIS; THIN PLATE; THREE DIMENSIONAL FINITE ELEMENT ANALYSIS; THREE DIMENSIONAL FINITE ELEMENTS; USER SUBROUTINE; WIDE-BAND;

LASER APPLICATIONS; MECHANICAL PROPERTIES; MELTING; METAL ANALYSIS; RESIDUAL STRESSES; SCANNING; SPEED; SUBROUTINES; SURFACES; THREE DIMENSIONAL;

FINITE ELEMENT METHOD;

EID: 77952741613     PISSN: 02641275     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matdes.2010.01.054     Document Type: Article

References (34)

1. Zhang Y., Chen J., Lei W., Xv R. Effect of laser surface melting on friction and wear behavior of AM50 magnesium alloy. Surf Coat Technol 2008, 202:3175-3179.
2. Yao J., Zhang Q., Gao M., Zhang W. Microstructure and wear property of carbon nanotube carburizing carbon steel by laser surface remelting. Appl Surf Sci 2008, 254:7092-7097.
3. Zhao Y., Ren L.-Q., Tong X., Zhou H., Chen L. Frictional wear and thermal fatigue behaviours of biomimetic coupling materials for brake drums. J Bionic Eng 2008, 5:20-27.
4. Majumdar J.D. Development of wear resistant composite surface on mild steel by laser surface alloying with silicon and reactive melting. Mater Lett 2008, 62:4257-4259.
5. Jun Y., Sun G.P., Jia S.S. Characterization and wear resistance of laser surface melting AZ91D alloy. J Alloy Compd 2008, 455:142-147.
6. Gao F., Wang H.M. Dry sliding wear property of a laser melting/deposited Ti2Ni/TiNi intermetallic alloy. Intermetallics 2008, 16:202-208.
7. Avril L., Courant B., Hantzpergue J.J. Tribological performance of [alpha]-Fe(Cr)-Fe2B-FeB and [alpha]-Fe(Cr)-h-BN coatings obtained by laser melting. Wear 2006, 260:351-360.
8. Alabeedi K.F., Abboud J.H., Benyounis K.Y. Microstructure and erosion resistance enhancement of nodular cast iron by laser melting. Wear 2009, 266:925-933.
9. Abbas G., Liu Z., Skeldon P. Corrosion behaviour of laser-melted magnesium alloys. Appl Surf Sci 2005, 247:347-353.
10. Kwok C.T., Cheng F.T., Man H.C. Microstructure and corrosion behavior of laser surface-melted high-speed steels. Surf Coat Technol 2007, 202:336-348.
11. Guozhi X., Jingxian Z., Yijun L., Keyu W., Xiangyin M., Pinghua L. Effect of laser remelting on corrosion behavior of plasma-sprayed Ni-coated WC coatings. Mater Sci Eng: A 2007, 460-461:351-356.
12. Bao G., Yamamoto M., Shinozaki K. Precipitation and Cr depletion profiles of Inconel 182 during heat treatments and laser surface melting. J Mater Process Technol 2009, 209:416-425.
13. Xu W.L., Yue T.M., Man H.C., Chan C.P. Laser surface melting of aluminium alloy 6013 for improving pitting corrosion fatigue resistance. Surf Coat Technol 2006, 200:5077-5086.
14. Hu J., Kong L.C., Liu G. Structure and hardness of surface of Al18B4O33w/Al composite by laser surface melting. Mater Sci Eng: A 2008, 486:80-84.
15. Abbas G., Li L., Ghazanfar U., Liu Z. Effect of high power diode laser surface melting on wear resistance of magnesium alloys. Wear 2006, 260:175-180.
16. Yang S., Meng Q., Geng L., Guo L., Wu L. Ni-TiC coating deposited on Ti-6Al-4V substrate by thermal spraying and laser remelting of Ni-clad graphite powder. Mater Lett 2007, 61:2356-2358.
17. Xianqing Y., Chengjun Z., Xuefeng S., Manping H., Jianguo M. Microstructure evolution of WC/steel composite by laser surface re-melting. Appl Surf Sci 2007, 253:4409-4414.
18. Colaço R., Gordo E., Ruiz-Navas E.M., Otasevic M., Vilar R. A comparative study of the wear behaviour of sintered and laser surface melted AISI M42 high speed steel diluted with iron. Wear 2006, 260:949-956.
19. Kim Y.-D., Kim W.-S. A numerical analysis of heat and fluid flow with a deformable curved free surface in a laser melting process. Int J Heat Fluid Flow 2008, 29:1481-1493.
20. Coupard D., Palin-luc T., Bristiel P., Ji V., Dumas C. Residual stresses in surface induction hardening of steels: comparison between experiment and simulation. Mater Sci Eng: A 2008, 487:328-339.
21. Chang C.-H., Chao L.-S. Modeling analysis of melting and solidifying processes in excimer laser crystallization of a-Si films with effective specific heat-enthalpy method. Int Commun Heat Mass Trans 2008, 35:571-576.
22. Li J.F., Li L., Stott F.H. A three-dimensional numerical model for a convection-diffusion phase change process during laser melting of ceramic materials. Int J Heat Mass Trans 2004, 47:5523-5539.
23. Grum J., Sturm R. A new experimental technique for measuring strain and residual stresses during a laser remelting process. J Mater Process Technol 2004, 147:351-358.
24. Shiomi M., Yoshidome A., Abe F., Osakada K. Finite element analysis of melting and solidifying processes in laser rapid prototyping of metallic powders. Int J Mach Tools Manuf 1999, 39:237-252.
25. Shen Z.H., Zhang S.Y., Lu J., Ni X.W. Mathematical modeling of laser induced heating and melting in solids. Opt Laser Technol 2001, 33:533-537.
26. SYSWELD. Engineering guide of training and toolbox, ESI Group, France; 2004.
27. Zhan H.-X., Wang Y., Han T., Li T.-D. Heat source model in numerical simulation of laser wide-band processing. Trans Mater Heat Treat 2007, 28:156-160.
28. Zhan H.-X., Wang Y., Li C.-W., Han T., Han B., Zhao W.-M. Computational and experimental study of a melt-hardened zone on a roller modified by wide-band laser treatment. Opt Laser Technol 2009, 41:251-257.
29. Brickstad B., Josefson B.L. A parametric study of residual stresses in multi-pass butt-welded stainless steel pipes. Int J Pres Ves Pip 1998, 75:11-25.
30. Yanez A., Alvarez J.C., Lopez A.J., Nicolas G., Perez J.A., Ramil A., et al. Modelling of temperature evolution on metals during laser hardening process. Appl Surf Sci 2002, 186:611-616.
31. Chuanyu G., Ming Z. Study on surface hardness and residual stress of 40Cr steel modified by laser rapid solidification. Appl Laser 2002, 22:18-22.
32. Jianyu Z., Lixin G., Jiuxia Y. The transient stress analysis of the roll surface during laser strengthening. Laser Technol 2004, 28:472-475.
33. Colaco R., Vilar R. Effect of the processing parameters on the proportion of retained austenite in laser surface melted tool steels. J Mater Sci Lett 1998, 17:563-567.
34. Jianyu Z., Lingli C., Guiyan Y., Lixin G., Huigang W. Distribution rules of stress field induced by laser strengthening on the roll surface. J Beijing Univ Technol 2007, 33:902-907.