Fabrication of two and three-dimensional structures by using inkjet printing

International Conference on Digital Printing Technologies

Volumn , Issue , 2009, Pages 791-794

  Perelaer, J ^a,b,c   Krober P ^a   Delaney, J T ^a,b,c   Schubert, U S ^a,b,c  

^a FRIEDRICH SCHILLER UNIVERSITY JENA   (Germany)

^b EINDHOVEN UNIVERSITY OF TECHNOLOGY   (Netherlands)

^c DUTCH POLYMER INSTITUTE DPI   (Netherlands)

Author keywords

[No Author keywords available]

Indexed keywords

3D MICROSTRUCTURES; CROSS LINKING AGENTS; HIGH QUALITY; IN-SITU; ISOPHORONE DIISOCYANATE; MICRON SCALE; NANO-PARTICLE DISPERSIONS; NON-CONTACT; PATTERNING TECHNIQUES; POLY(PROPYLENE GLYCOL); POLYMERISATION; PRINT HEAD; PROCESSING STEPS; SCIENTIFIC RESEARCHES; THREE-DIMENSIONAL STRUCTURE;

CONCURRENT ENGINEERING; CROSSLINKING; DIGITAL PRINTING; FABRICATION; FUNCTIONAL MATERIALS; FUNCTIONAL POLYMERS; GLYCOLS; INK JET PRINTERS; INK JET PRINTING; JOB ANALYSIS; MICROELECTRONICS; MICROSTRUCTURE; PRINTING PRESSES; PROPYLENE; RAPID PROTOTYPING; TECHNOLOGY; THREE DIMENSIONAL; TWO DIMENSIONAL;

INK;

EID: 77952622094     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (41)

1. J. A. Nollet, W. Watson, "Examination of Certain Phaenomena in Electricity", Philos. Trans., 46, 368 (1749).
2. F. Savart, "Mémoires sur la Constitution des Veines Liquides Lancées par des Orifices Circulaires en Mince Paroi", Ann. Chim. Phys., 53, 337 (1833).
3. W. Thomson, UK. Patent 2, 147 (1867).
4. http://en.wikipedia.org/wiki/Lord-Kelvin (last accessed: 11th June 2009).
5. E. F. Goedde, M. C. Yuen, "Experiments on Liquid Jet Instability", J. Fluid Mech., 40, 495 (1970).
6. Lord Rayleigh, "On the Instability of Jets", Proc. London Math. Soc., 10, 4(1878).
7. R. Elmqvist, US Patent 2, 566, 443 (1951).
8. F. J. Kamphoefher, "Inkjet Printing", IEEE T. Electron. Dev., 19, 584 (1972).
9. R. D. Carnahan, S. L. Hou, "Inkjet Technology", IEEE Trans. Ind. Appl., IA-13, 95 (1977).
10. M. Döring, "Inkjet Printing", Philips Tech. Rev., 40, 192 (1982).
11. nd Edition, Mullard Ltd., London (1974).
12. th June 2009).
13. J. Brünahl, A. M. Grishin, "Piezoelectric Shear Mode Drop-On-Demand Inkjet Actuator", Sens. Actuators A, 101, 371 (2002).
14. S. I. Zoltan, US Patent 3, 683, 212 (1972).
15. N. G. E. Stemme, US Patent 3, 747, 120 (1972).
16. E. L. Kyser, S. B. Scars, US Patent 3, 946, 398 (1976).
17. S. D. Howkins, US Patent 4, 459, 601 (1984).
18. K. H. Fishbeck, A. T. Wright, US Patent 4, 584, 590 (1986).
19. H. Kipphan, "Handbook of Print Media: Technologies and Manufacturing Processes", Springer (2001).
20. B.-J. de Gans, P. C. Duineveld, U. S. Schubert, "Inkjet Printing of Polymers: State of the Art and Future Developments", Adv. Mater., 16, 203(2004).
21. E. Tekin, P. J. Smith, U. S. Schubert, "Inkjet Printing as a Deposition and Patterning Tool for Polymers and Inorganic Particles", Soft Matter, 4, 703 (2008).
22. P. Calvert, "Inkjet Printing for Materials and Devices", Chem. Mater., 13, 3299(2001).
23. E. Tekin, H. Wijlaars, E. Holder, D. A. M. Egbe, U. S. Schubert, "Film Thickness Dependency of the Emission Colors of PPE-PPVs in Inkjet Printed Libraries", J. Mater. Chem., 16, 4294 (2006).
24. T. H. J. van Osch, J. Perclaer, A. W. M. de Laat, U. S. Schubert, "Inkjet Printing of Narrow Conductive Tracks on Untreated Polymeric Substrates", Adv. Mater., 20, 343 (2008).
25. A. M. J. van den Berg, A. W. M. de Laat, P. J. Smith, J. Perelaer, U. S. Schubert, "Geometric Control of Inkjet Printed Features Using a Gelating Polymer", J. Mater. Chem., 17, 677 (2007).
26. B. Derby, "Bio Printing: Inkjet Printing Proteins and Hybrid Cell-Containing Materials and Structures", J. Mater. Chem., 18, 5717 (2008).
27. B.-J. de Gans, U. S. Schubert, "Inkjet Printing of Well-Defined Polymer Dots and Arrays", Langmuir, 20, 7789 (2004).
28. N. Reis, C. Ainsley, B. Derby, "Ink-Jet Delivery of Particle Suspensions by Piezoelectric Droplet Ejectors", J. Appl. Phys., 97, 094903 (2005).
29. J. A. Lewis, "Direct Ink Writing of 3D Functional Materials", Adv. Funct. Mater., 16, 2193 (2006).
30. D. Attinger, Z. Zhao, D. Poulikakos, "An Experimental Study of Molten Microdroplet Surface Deposition and Solidification: Transient Behavior and Wetting Angle Dynamics", J. Heat Transfer, 122, 544 (2000).
31. R. D. Deegan, O. Bakajin, T. F. Dupont, G. Huber, S. R. Nagel, T. A. Witten, "Contact Line Deposits in an Evaporating Drop", Phys. Rev. E, 62, 756 (2000).
32. J. Perelaer, P. J. Smith, C. E. Hendriks, A. M. J. van den Berg, U. S. Schubert, "The Preferential Deposition of Silica Micro-Particles at The Boundary of Inkjet Printed Droplets", Soft Matter, 4, 1072 (2008).
33. D. B. van Dam, J. G. M. Kuerten, "Modeling the Drying of Inkjet Printed Structures and Experimental Verification", Langmuir, 24, 582 (2008).
34. J. Perelaer, B.-J. de Gans, U. S. Schubert, "Ink-jet Printing and Microwave Sintering of Conductive Silver Tracks", Adv. Mater., 18, 2101 (2006).
35. D. Redinger, S. Molesa, S. Yin, R. Farschi, V. Subramanian, "An Ink-Jet-Deposited Passive Component Process for RFID", IEEE Trans. Electron. Devices, 51, 1978 (2004).
36. E. Tekin, B.-J. de Gans, U. S. Schubert, "Ink-jet Printing of Polymers - from Single Dots to Thin Film Libraries", J. Mater. Chem., 14, 2627 (2004).
37. J. Perelaer, P. J. Smith, M. M. P. Wijnen, E. van den Bosch, R. Eckardt, P. H. J. M. Ketelaars, U. S. Schubert, "Droplet Tailoring Using Evaporative Inkjet Printing", Macromol. Chem. Phys., 210, 387 (2009).
38. J. Perelaer, P. J. Smith, E. van den Bosch, S. S. C. van Grootel, P. H. J. M. Ketelaars, U. S. Schubert, "The Spreading of Inkjet-Printed Droplets with Varying Polymer Molar Mass on a Dry Solid Substrate", Macromol. Chem. Phys., 210, 495 (2009).
39. A. U. Chen, O. A. Basaran, "A New Method for Significantly Reducing Drop Radius Without Reducing Nozzle Radius in Drop-on-demand Drop Production", Phys. Fluids, 14, L1 (2002).
40. J. E. Fromm, "Numerical Calculation of the Fluid Dynamics of Drop-on-Deman Jets", IBMJ. Res. Develop., 28, 322 (1984).
41. S. Paraell, K. Min, M. Cakmak, "Kinetic Studies of Polyurethane Polymerization with Raman Spectroscopy", Polymer, 44, 5137 (2003).