Effect of temperature and dynamic loading on the mechanical properties of copper-alloyed high-strength interstitial-free steel

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 40, Issue 4, 2009, Pages 856-866

  Rana, R ^a   Singh, S B ^b   Bleck, W ^a   Mohanty, O N ^b,c  

^a RWTH AACHEN UNIVERSITY   (Germany)

^b INDIAN INSTITUTE OF TECHNOLOGY   (India)

^c University of Technology   (India)

Author keywords

[No Author keywords available]

Indexed keywords

ACTIVATION VOLUME; BATCH ANNEALING; CONTINUOUS ANNEALING; DYNAMIC LOADINGS; EFFECT OF TEMPERATURE; HIGH STRAIN RATES; HIGH-STRENGTH; IF STEEL; INTERSTITIAL FREE STEEL; LOW TEMPERATURES; PEAK STRENGTH; ROOM TEMPERATURE; SOLID-SOLUTION SOFTENING; SPECIFIC ENERGY ABSORPTION; STRAIN RATE SENSITIVITY; STRAIN-HARDENING CAPACITY; TEMPERATURE SENSITIVITY; TWO STAGE;

ANNEALING; COPPER; DYNAMIC LOADS; FERRITES; FORMABILITY; HIGH STRENGTH STEEL; SOLID SOLUTIONS; STEEL METALLURGY;

STRAIN RATE;

EID: 77952583957     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-008-9767-z     Document Type: Article

References (38)

1. S. Hoile: Mater. Sci. Technol., 2000, vol. 16, pp. 1079-93.
2. H. Takechi: ISIJ Int., 1994, vol. 34, pp. 1-8.
3. X. Yang, D. Vandershueren, J. Dilewijns, C. Standaert, and Y. Houbaert: ISIJ Int., 1996, vol. 36, pp. 1286-94.
4. M. Hua, C.I. Garcia, and A.J. DeArdo: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1769-80.
5. M. Pricryl, Y.P. Lin, and S.V. Subramanian: Scripta Metall. Mater., 1990, vol. 24, pp. 375-80.
6. T. Senuma: ISIJ Int., 2001, vol. 41, pp. 520-32.
7. R. Rana, W. Bleck, S.B. Singh, and O.N. Mohanty: Mater. Lett., 2007, vol. 61, pp. 2919-22.
8. E. Hornbogen and R.C. Glenn: Trans. TMS-AIME, 1960, vol. 218, pp. 1064-70.
9. S.R. Goodman, S.S. Brenner, and J.R. Low, Jr.: Metall. Trans., 1973, vol. 4, pp. 2363-78.
10. N. Maruyama, M. Sugiyama, T. Hara, and H. Tamehiro: Mater. Trans. JIM, 1999, vol. 40, pp. 268-77.
11. A. Deschamps, M. Militzer, and W.J. Poole: ISIJ Int., 2001, vol. 41, pp. 196-205.
12. R. Rana, W. Bleck, S.B. Singh, and O.N. Mohanty: Steel Res. Int., 2007, vol. 78, pp. 612-21.
13. R. Rana, W. Bleck, S.B. Singh, and O.N. Mohanty: Steel Res. Int., 2007, vol. 78, pp. 622-30.
14. R. Rana, W. Bleck, S.B. Singh, and O.N. Mohanty: Steel Res. Int., 2007, vol. 78, pp. 631-37.
15. Vehicle Safety-ULSAB-AVC Crash Evaluations, ULSAB-AVC Consortium, Nov. 1999.
16. K. Kishida: Nippon Steel Tech. Rep., 1995, No. 64, pp. 33-35.
17. Y. Hosoya, M. Morita, K. Tahara, and O. Fukumoto: CAMPISIJ, 1992, vol. 5, pp. 1823-26.
18. IISI Committee Report: Recommended Practice for Dynamic Tensile Testing for Sheet Metals, 2004.
19. ESIS Committee Report: Proposed Standard Method for Dynamic Tensile Tests: ESIS TC5, 1997.
20. German Steel Association (VDEh) Report: Dynamic Tensile Testing Recommendation, 2004.
21. W.T. Lankford, S.C. Snyder, and J.A. Bauscher: Trans. ASM, 1950, vol. 42, pp. 1197-1225.
22. G.E. Dieter: in Mechanical Metallurgy, McGraw-Hill, London, 1988, vol. p. 287.
23. G.M. Worral, J.T. Buswell, C.A. English, M.G. Hetherington, and G.D.W. Smith: J. Nucl. Mater., 1987, vol. 148, pp. 107-14.
24. W.J. Phythian, S. Dumbill, P. Brown, and R. Sinclair: Proc. 6th Int. Symp. on Environmental Degredation in Nuclear Power Systems-Water Reactors, R.E. Gold and E.P. Simonen, eds., TMS, San Diego, CA, 1993, pp. 729-37.
25. H.C. Rogers: Annu. Rev. Mater. Sci., 1979, vol. 9, pp. 283-311.
26. W.-S. Lee and C.-F. Lin: Mater. Sci. Eng. A, 1998, vol. 241, pp. 48-59.
27. H. Conrad and S. Frederick: Acta Metall., 1962, vol. 10, pp. 1013- 20.
28. L. Meyer, W. Bleck, and W. Müschenborn: Proc. Int. Forum for Phys. Metall. of IF Steels, ISIJ and Nissoh Iwai Corp., Tokyo, 1994, pp. 203-22.
29. W. Bleck and I. Schael: Steel Res., 2000, vol. 71, pp. 173-78.
30. W. Bleck, P. Larour, and A. Bäumer: Proc. 3rd Int. Conf. on Advanced Materials Processing (ICAMP-3), Institute of Materials Engineering, Australasia, Melbourne, 2004, pp. 21-29.
31. W.-S. Lee and C.-Y. Liu: Mater. Sci. Eng. A, 2006, vol. 426, pp. 101-13.
32. H. Conrad and H. Wiederisch: Acta Metall., 1960, vol. 8, pp. 128- 30.
33. L. Shi and D.O. Northwood: Acta. Metall. Mater., 1995, vol. 43, pp. 453-60.
34. J. Syarif, T. Tsuchiyama, and S. Takaki: ISIJ Int., 2003, vol. 43, pp. 1100-04.
35. W. Jolley: Trans. AIME, 1968, vol. 242, pp. 306-14.
36. W.C. Leslie, R.J. Soeber, S.G. Babcock, and S.J. Green: Trans. ASM, 1969, vol. 62, pp. 690-710.
37. Y.T. Chen, D.G. Atteridge, and W.W. Gerberich: Acta Metall., 1981, vol. 29, pp. 1171-85.
38. K. Okazaki: J. Mater. Sci., 1996, vol. 31, pp. 1087-99.