Microstructure and wear resistance of rapidly solidified hypereutectic Al-Si alloys

Mocaxue Xuebao/Tribology

Volumn 30, Issue 2, 2010, Pages 111-117

  Li, Ji Wen ^a,b   Wang, Ai Qin ^a   Xie, Jing Pei ^a   Wang, Wen Yan ^a   Li, Luo Li ^a   Wei, Shi Zhong ^a,b  

^a HENAN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (China)

^b Henan Engineering Research Center for Wear of Material   (China)

Author keywords

Hypereutectic Al Si alloys; Micro nanocrystalline; Microstructure; Rapid solidification; Wear resistance

Indexed keywords

CASTING ALLOY; FINE GRAINS; HYPEREUTECTIC AL-SI ALLOYS; HYPOEUTECTIC MICROSTRUCTURE; MELT-SPINNING TECHNIQUES; MICRO-NANO; MICRO-NANOCRYSTALLINE; NANO-STRUCTURED; NANOCRYSTALLINE MICROSTRUCTURES; NEEDLE-LIKE; NUCLEATION AND GROWTH; PRIMARY SI; PRIMARY SILICON; RAPIDLY SOLIDIFIED; SEM; SI ALLOYS; TEM;

ALUMINUM; BINARY ALLOYS; CERIUM ALLOYS; CRYSTALLIZATION; EUTECTICS; MICROSTRUCTURE; RAPID SOLIDIFICATION; SCANNING ELECTRON MICROSCOPY; SILICON; SILICON ALLOYS; TERNARY SYSTEMS; TRANSMISSION ELECTRON MICROSCOPY; WEAR RESISTANCE; X RAY DIFFRACTION;

NANOCRYSTALLINE ALLOYS;

EID: 77952492837     PISSN: 10040595     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (14)

1. Li S M, Ma B L, Li X L, et al. Phases competitive growth of eutectic alloys during directional solidification[J]. Science in china E, 2005, 35: 479-489.
2. Kapranos P, Kirkwood D H, Atkinson H V, et al. Thixoforming of an automotive part in A390 hypereutectic Al-Si alloy[J]. Journal of Materials Processing Technology, 2003, 135: 271-277.
3. Ge L Q, Yan Y B, Jiang L, et al. The approaches to ameliorate morphologies of primary silicon in hypereutectic Al-Si alloys[J]. Materials Review, 2007, 21(3): 70-73(in Chinese)
4. Lu X, Zeng Y W, Ouyang Z Y, et al. Effect of Bi element on fractional behavior of A390 hypereutectic alloy[J]. Tribology, 2007, 25(4): 284-288(in Chinese)
5. Zhang R, Sheng S J, Liu L. Effect of overheating treatment on the wear characteristics of hypereutectic Al-Si alloy[J]. Tribology, 2000, 20(5): 344-347(in Chinese)
6. Si F M, Yang C X, Yan B, et al. Initial aging transformation in Zn-Al based alloy prepared by rapid solidification with single roller[J]. Shanghai Metals, 2008, 30(2): 23-27(in Chinese)
7. Yu J, Yao J P, Li J. A review on the research progress of high Si-Al alloys by rapid solidification/powder metallurgical technology[J]. Heat Treatment Technology and Equipment, 2008, 29(4): 4-7(in Chinese)
8. Zhu Q F, Sun Z M, Shao B L, et al. Fracture and plastic deformation of nanometer crystalline aluminium alloy[J]. Chinese Journal of Rare Metals, 2007, 31(4): 451-456(in Chinese)
9. Dong T S, Cui C X, Cheng Y J, et al. Study on improving wear resistance of ZL109 by nanocrystal Al-Ti-B[J]. Foundry Technology, 2007, 28(5): 661-664(in Chinese)
10. Fan X M, Ye H Q. Thermal stability of surface nanocrystalline microstructure of 7A04 aluminum alloy[J]. Transactions of Materials and Heat Treatment, 2007, 28(8): 267-270(in Chinese)
11. Xu C L, Jiang Q C. Morphologies of primary silicon in hypereutectic Al-Si alloy with melt overheating temperature and cooling rate[J]. Materials Science and Engineering A, 2006, 437: 451-455.
12. Wang Z F, Guo F, Yu H S, et al. Rapid solidification of Al-18%Si hypereutectic alloy in drop tube[J]. Trans Nonferrous Met Soc China, 2006, 10: 769-771.
13. Wang A Q, Xie J P, Liu Z X, et al. Influences of Re and P complex modifications on microstructures and wear resistance of hypereutectic Al-21%Si alloy[J]. Foundry technology, 2007, 28(11): 7741-1841(in Chinese)
14. Wen S Z. Research progress on wear of materials[J]. Tribology, 2008, 28(1): 1-5(in Chinese)