Effect of compounding and injection molding on the mechanical properties of flax fiber polypropylene composites

Journal of Reinforced Plastics and Composites

Volumn 29, Issue 9, 2010, Pages 1366-1385

  Barkoula, N M ^a,b   Garkhail, S K ^a,c   Peijs, T ^a,c  

^a QUEEN MARY UNIVERSITY OF LONDON   (United Kingdom)

^b UNIVERSITY OF IOANNINA   (Greece)

^c EINDHOVEN UNIVERSITY OF TECHNOLOGY   (Netherlands)

Author keywords

Compounding; Flax fibers; Injection molding; Interface; LFT; MA PP; PP; Short fiber composites

Indexed keywords

COMPOUNDING; DIMENSIONAL CHANGES; EXTRUSION COMPOUNDING; FIBER EFFICIENCY; FIBER LENGTH; FIBER-MATRIX ADHESION; FLAX FIBER; IN-FIBER; KNEADING PROCESS; LONG FIBER THERMOPLASTICS; MECHANICAL RESPONSE; MOLDED COMPOSITES; POLYMER FLOWS; POLYPROPYLENE COMPOSITE; SHORT FIBER COMPOSITES;

FIBERS; FLAX; LINEN; MALEIC ANHYDRIDE; MECHANICAL PROPERTIES; MOLDS; PLASTIC PRODUCTS; PULTRUSION; REINFORCED PLASTICS; TENSILE STRENGTH; THERMOPLASTICS; YARN;

INJECTION MOLDING;

COMPOSITES; FIBERS; FLAX; INJECTION MOLDING; INTERFACES; LINEN; MALEIC ANHYDRIDE; MECHANICAL PROPERTIES; MIXING; MOLDS; PLASTICS; TENSILE STRENGTH; THERMOPLASTICS; YARN;

EID: 77952280850     PISSN: 07316844     EISSN: 15307964     Source Type: Journal    
DOI: 10.1177/0731684409104465     Document Type: Article

References (44)

1. Turng, L.S. (2001). Special and Emerging Injection Molding Processes, Journal of Injection Molding Technology, 5 (3). 160-179.
2. Garkhail, S.K., Heijenrath, R.W.H. and Peijs, T. (2000). Mechanical Properties of Natural-fiber-mat-reinforced Thermoplastics Based on Flax Fibers and Polypropylene, Applied Composite Materials, 7 (5-6). 351-372.
3. Peijs, T. (2000). Natural Fiber Based Composites, Materials Technology, 15 (4). 281-285.
4. Foulk, J.D., Akin, D.E. and Dodd, R.B. (2000). New Low Cost Flax Fibers for Composites, SAE Technical Paper Number 2000-01-1133, SAE 2000 World Congress, 6-9 March, Detroit.
5. Peijs, T., Garkhail, S., Heijenrath, R., Van Den Oever, M. and Bos, H. (1998). Thermoplastic Composites Based on Flax Fibers and Polypropylene: Influence of Fiber Length and Fiber Volume Fraction on Mechanical Properties, Macromolecular Symposia, 127: 193-203. (Pubitemid 128476559)
6. Heijenrath, R. and Peijs, T. (1996). Natural-fiber-mat-reinforced Thermoplastic Composites Based on Flax Fibers and Polypropylene, Advanced Composites Letters, 5 (3). 81-85. (Pubitemid 126309274)
7. Van de Velde, K. and Kiekens, P. (2003). Effect of Material and Process Parameters on the Mechanical Properties of Unidirectional and Multidirectional Flax/Polypropylene Composites, Composites Structures, 62, 443-448.
8. Goutianos, S. and Peijs, T. (2003). The Optimisation of Flax Fiber Yarns for the Development of High Performance Natural Fiber Composites, Advanced Composites Letters, 12: 237-241.
9. Goutianos, S., Peijs, T., Nystrom, B. and Skrifvars, M. (2006). Development of Flax Fiber Based Textile Reinforcements for Composite Applications, Applied Composite Materials, 13 (4). 199-215.
10. Eisele, D. (1994). Faserhaltige Bauteile für die Automobilausstattung Zur Leistungsfähigkeit von Naturfasern, Textil Praxis International, 49 (1-2). 68-76
11. Brouwer, W.D. (2001). Natural Fiber Composites, Saving Weight and Cost with Renewable Materials, BD-1414, In: Thirteenth International Conference on Composite Materials, Beijing, China.
12. Karus, M., Ortmann, S. and Vogt, D. (2005). All Natural on the Inside? Natural Fiber in Automotive Interiors, Kunststoffe Plast Europe, 7: 1-3.
13. Singleton, A.C.N., Baillie, C.A., Beaumont, P.W.R. and Peijs, T. (2003). On the Mechanical Properties, Deformation and Fracture of a Natural Fiber/Recycled Polymer Composite, Composites: Part B, 34: 519-526.
14. Karus, M. and Gahle, C. (2006). Use of Natural Fibers in Composites for the German Automotive Production from 1999 till 2005, Nova-Institut Huerth, December.
15. Snijder, M.H.B., Bos, H.L. and van Kemenade, M.J.J.M. Extruder for Continuously Manufacturing Composites of Polymer and Cellulosic Fibers, European Patent WO9956936, US Patent US 6,565,348 B1.
16. Van den Oever, M.J.A. and Bos, H.L. (1998). Critical Fiber Length and Apparent Interfacial Shear Strength of Single Flax Fiber Polypropylene Composites, Advanced Composites Letters, 7 (3). 81-85.
17. Hull, D. (1981). An Introduction to Composite Materials, Cambridge University Press, Cambridge.
18. Nechwatal, A., Reussmann, T., Böhm, S. and Richter, E. (2005). The Dependence between the Process Technologies and the Effect of MAH-PP-adhesives in Natural Fiber Reinforce Thermoplastic Composites, Advanced Engineering Materials, 7 (1-2). 68-73.
19. Thomason, J.L. and Vlug, M.A. (1996). Influence of Fiber Length and Concentration on the Properties of Glass Fiber-reinforced Polypropylene: 1. Tensile and Flexular Modulus, Composites: Part A, 27A: 477-484.
20. Thomason, J.L., Vlug, M.A., Schipper, G. and Krikor, H.G.L.T. (1996). Influence of Fiber Length and Concentration on the Properties of Glass Fiber-reinforced Polypropylene: Part 3, Strength and Strain at Failure, Composites: Part A, 27A: 1075-1084.
21. Bos, H.L., van den Oever, M.J.A. and Peters, O.C.J.J. (2002). Tensile and Compressive Properties of Flax Fibers for Natural Fiber Reinforced Composites, Journal of Materials Science, 37: 1683-1692.
22. van den Oever, M.J.A., Bos, H.L. and van Kemenade, J.J.M. (2000). Influence of the Physical Structure of Flax Fibers on the Mechanical Properties of Flax Fiber Reinforced Polypropylene Composites, Applied Composite Materials, 7 (5-6). 387-402.
23. George, J., Klompen, E.T.J. and Peijs, T. (2001). Thermal Degradation of Green and Upgraded Flax Fibers, Advanced Composites Letters, 10 (2). 81-88. (Pubitemid 33402883)
24. Wielage, B., Lampke, T. h., Utschick, H. and Soergel, F. (2003). Processing of Natural-fiber Reinforced Polymers and the Resulting Dynamic-mechanical Properties, Journal of Materials Processing Technology, 139: 140-146.
25. Stamboulis, A., Baillie, C.A., Garkhail, S.K., van Melick, H.G.H. and Peijs, T. (2000). Environmental Durability of Flax Fibers and Their Composites Based on Polypropylene Matrix, Applied Composite Materials, 7: 273-294.
26. Jolly, M. and Jayaraman, K. (2006). Manufacturing Flax Fiber-reinforced Polypropylene Composites by Hot-pressing, International Journal of Modern Physics B, 20 (25-27). 4601-4606.
27. Aurich, T. and Mennig, G. (2001). Flow-induced Fiber Orientation in Injection Molded Flax Fiber Reinforce Polypropylene, Polymer Composites, 22 (5). 680-689.
28. Li, H. and Sain, M.M. (2003). High Stiffness Natural Fiber-reinforced Hybrid Polypropylene Composites, Polymer-Plastics Technology and Engineering, 42 (5). 853-862.
29. Cantero, G., Arbelaiz, A., Llano-Ponte, R. and Mondragon, I. (2003). Effects of Fiber Treatment on Wettability and Mechanical Behaviour of Flax/Polypropylene Composites, Composites Science and Technology, 63: 1247-1254.
30. Arbelaiz, A., Genandez, B., Cantero, G., Llano-Ponte, R., Valea, A. and Mondragon, I. (2005). Mechanical Properties of Flax Fiber/Polypropylene Composites, Influence of Fiber/Matrix Modification and Glass Fiber Hybridization, Composites: Part A, 36: 1637-1644.
31. Bos, H.L., Muessig, J. and van den Oever, M.J.A. (2006). Mechanical Properties of Short-flax-fiber Reinforced Compounds, Composites: Part A, 37: 1591-1604.
32. Nystroem, B., Joffe, R. and Langstroem, R. (2007). Microstructure and Strength of Injection Molded Natural Fiber Composites, Journal of Reinforced Plastics and Composites, 26 (6). 579-599
33. Arbelaiz, A., Fernandez, B., Ramos, J.A., Retegi, A., Llano-Ponte, R. and Mondragon, I. (2005). Mechanical Properties of Short Flax Fiber Bundle/Polypropylene Composites: Influence of Matrix/Fiber Modification, Fiber Content, Water Uptake and Recycling, Composites Science and Technology, 65: 1582-1592.
34. Van de Velde, K. and Kiekens, P. (2003). Effect of Material and Process Parameters on the Mechanical Properties of Unidirectional and Multidirectional Flax/Polypropylene Composites, Composite Structures, 62: 443-448.
35. Gu, H. and Liyan, L. (2008). Research on Properties of Thermoplastic Composites Reinforced by Flax Fabrics, Materials and Design, 29: 1075-1079.
36. Arbelaiz, A., Fernandez, B., Ramos, J.A. and Mondragon, I. (2006). Thermal and Crystallization Studies of Short Flax Fiber Reinforced Polypropylene Matrix Composites: Effect of Treatments, Thermochimica Acta, 440 (2). 111-121.
37. Stamboulis, A., Baillie, C.A. and Peijs, T. (2001). Effects of Environmental Conditions on Mechanical and Physical Properties of Flax Fibers, Composites: Part A, 32: 1105-1115.
38. Garkhail, S., Wieland, B., George, J., Soykeabkaew, N. and Peijs, T. (2009). Transcrystallisation in PP/Flax Composites and its Effect on Interfacial and Mechanical Properties, Journal of Materials Science, 44 (2). 510-519. DOI 10.1007/s10853-008-3089-9.
39. Mieck, K.-P. and Reussmann, T. (2003). Continuous Fiber Granulate and Procedure and Device for Manufacturing a Long-fiber Granulate, US Patent, 0086995.
40. Jakopin, S. (1984). Compounding Techniques for Fiber Reinforced Properties, Advances in Polymer Technology, 3 (4). 365-381. (Pubitemid 14527937)
41. Kelly, A. and Tyson, W.R. (1965). Tensile Properties of Fiber-reinforced Metals: Copper/Tungsten and Copper/Molybdenum, Journal of Mechanics and Physics of Solids, 13 (6). 329-350.
42. Mieck, K.-P., Nechwatal, A. and Knobelsdorf, C. (1995). Faser-matrix Haftung in Kunststoffverbunden Aus Thermoplastischer Matrix Und Flachs, 2. Die Anwendung von Funktionalisiertem Polypropylen, Die Angewandte Makromolekulare Chemie, 225 (1). 37-39.
43. Garkhail, S. (2001). Composites Based on Natural Fibres and Thermoplastic Matrices, PhD Thesis, Queen Mary University of London, Chapter 3.
44. Van Den Oever, M. and Peijs, T. (1998). Continuous-glass-fiber-reinforced Polypropylene Composites II. Influence of Maleic-anhydride Modified Polypropylene on Fatigue Behaviour, Composites Part A: Applied Science and Manufacturing, 29 (3). 227-239.