Enabling flexible manufacturing systems by using level of automation as design parameter

Proceedings - Winter Simulation Conference

Volumn , Issue , 2009, Pages 2176-2184

  Johansson, Björn ^a   Fasth, Åsa ^a   Stahre, Johan ^a   Heilala, Juhani ^b   Leong, Swee ^c   Lee, Y Tina ^c   Riddick, Frank ^c  

^a CHALMERS UNIVERSITY OF TECHNOLOGY   (Sweden)

^b VTT TECHNICAL RESEARCH CENTRE OF FINLAND   (Finland)

^c NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DATA SOURCE; DESIGN PARAMETERS; MACHINE FAILURE; MANUFACTURING ENVIRONMENTS; MANUFACTURING SYSTEM; NEUTRAL INTERFACE; SIMULATION TOOL; VIRTUAL MANUFACTURING;

AGILE MANUFACTURING SYSTEMS; AUTOMATION; ERGONOMICS; INDUSTRIAL APPLICATIONS;

FLEXIBLE MANUFACTURING SYSTEMS;

EID: 77951609660     PISSN: 08917736     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/WSC.2009.5429728     Document Type: Conference Paper

References (29)

1. Balderud, J., and A. Olofsson. 2008. A Plug-in Based Software Architecture for Generic Data Management, Master's thesis, Department of Computer Science and Engineering. Chalmers University of Technology, Gothenburg.
2. Banks, J., J. S. Carson, B. L. Nelson, and D. M. Nicol. 2005. Discrete-event system simulation. 4th ed. Upper Saddle River, New Jersey: Prentice-Hall, Inc.
3. Ericsson, U. 2005. Discrete Event Simulation, The Truth. Ph.D. thesis, Department of Production Engineering, Chalmers University of Technology, Sweden.
4. Fasth, Å., and J. Stahre. 2008. Does Levels of Automation need to be changed in an assembly system? - A case study. The 2nd Swedish Production Symposium (SPS). Stockholm, Sweden.
5. Fasth, Å., J. Stahre, and K. Deckner. 2008. Measuring and analysing Levels of Automation in an assembly system. The 41st CIRP conference on manufacturing systems Tokyo, Japan.
6. Fitts, P. 1951. Human engineering for an effective air navigation and traffic control system. Columbus, OH, Ohio state university.
7. Frohm, J. 2008. Levels of Automation in Production Systems, Department of Production Systems, Chalmers University of Technology, Göteborg, Sweden (Ph.D. Thesis).
8. Groover, M. P. 2001. Automation, Production Systems, and Computer-Integrated Manufacturing, second ed. Prentice-Hall, Englewood Cliffs, NJ, USA.
9. Harlin, U., J. Frohm, M. Berglund, and J. Stahre. 2006. Towards Efficient Automation Implementation", In Proceedings of the 9th symposium IFAC on "Automated Systems Based on Human Skills and Knowledge", Mayer, F. and Stahre, J. (Eds.) 22-24 May, Nancy, France.
10. Heilala, J., K. Helin, and J. Montonen. 2006. Total cost of ownership analysis for modular final assembly systems. In International Journal of Production Research. Vol. 44 (2006) No: 18 - 19, 3967-3988 (Pubitemid 44181133)
11. Heilala, J., V. Saija, H. Tonteri, J. Montonen, B. Johansson, J. Stahre, and S. Lind. 2008. Simulation-Based Sustainable Manufacturing System Design, In Proceedings of the 2008 Winter Simulation Conference, eds. S. J. Mason, R. R. Hill, L. Mönch, O. Rose, T. Jefferson, and J. W. Fowler, 1922-1930, Piscataway, New Jersey: Institute of Electrical and Electronics Engineers, Inc.
12. Heilala, J., O. Väätäinen, J. Montonen, T. Laaksonen, and H. Kulmala. 2007. Decision Support and Simulation Methods For Assembly System Sales Engineers. The 6th EUROSIM Congress, Ljubljana, Slovenia. 9th - 13th September 2007.
13. Helin, K., J. Viitaniemi, S. Aromaa, J. Montonen, T. Evilä, S. Leino, and T. Määttä. 2007. OSKU Digital Human Model in the Participatory Design Approach. A New Tool to Improve Work Tasks and Workplaces. VTT Working Papers VTT-WORK-83. Available at 〈http://www.vtt.fi/inf/pdf/ workingpapers/2007/W83.pdf〉. [accessed April 13, 2009]
14. Johansson, M., and R. Zachrisson. 2006. Modeling automotive manufacturing process. Master's thesis. Department of Product and Production development. Chalmers University of Technology, Gothenburg.
15. Johansson, M., S. Leong, Y. T. Lee, F. Riddick, G. Shao, B. Johansson, A. Skoogh, and P. Klingstam. 2007. Generic Simulation of Automotive Assembly for Interoperability Testing, In Proceedings of the 2007 Winter Simulation Conference, eds. S. G. Henderson, B. Biller, M.-H. Hsieh, J. Shortle, J. D. Tew, and R. R. Barton, 1035-1043, Piscataway, New Jersey: Institute of Electrical and Electronics Engineers, Inc.
16. Kibira, D., and C. McLean. 2007. Generic Simulation of Automotive Assembly for Interoperability Testing, In Proceedings of the 2007 Winter Simulation Conference, eds. S. G. Henderson, B. Biller, M.-H. Hsieh, J. Shortle, J. D. Tew, and R. R. Barton, 1035-1043. Piscataway, New Jersey: Institute of Electrical and Electronics Engineers, Inc.
17. Law, A. M., and M. G. McComas. 1999. Simulation of Manufacturing Systems, In Proceedings of the 1999 Winter Simulation Conference, IEEE, Phoenix, pp. 56-59.
18. Law, A. M., and W. D. Kelton. 2000. Simulation modeling & analysis. 3rd ed. New York: McGraw-Hill, Inc.
19. Leong, S, Y. T. Lee, and F. Riddick. 2006. A Core Manufacturing Simulation Data Information Model for Manufacturing Applications. Simulation Interoperability Workshop, Simulation Interoperability and Standards Organization, September 10-15, 2006, Orlando.
20. Lind, S., B. Krassi, J. Viitaniemi, S. Kiviranta, J. Heilala, and C. Berlin. (2008a). Linking Ergonomics Simulation to Production Process Development, In Proceedings of the 2008 Winter Simulation Conference, eds. S. J. Mason, R. R. Hill, L. Mönch, O. Rose, T. Jefferson, and J. W. Fowler, 1968-1973, Piscataway, New Jersey: Institute of Electrical and Electronics Engineers, Inc.
21. Lind, S., B., Krassi, B. Johansson, J. Viitaniemi, J. Heilala, J. Stahre, S. Vatanen, Å. Fasth, and C. Berlin. 2008b. SIMTER: A Production Simulation Tool for Joint Assessment of Ergonomics, Level of Automation and Environmental Impacts. The 18th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2008), June 30 - July 2, 2008.
22. McLean, C., S. Jain, F. Riddick, and Y. T. Lee. 2007. A simulation Architecture for Manufacturing Interoperability Testing In Proceedings of the 2007 Winter Simulation Conference, S. G. Henderson, B. Biller, M.-H. Hsieh, J. Shortle, J. D.
23. Parasuraman, R., T. B. Sheridan, and C. D Wickens. 2000. A Model for Types and Levels of Human Interaction with Automation, IEEE Transactions on System, Man, and Cybernetics - Part A: Systems and Humans Vol. 30 (3), pp. 286-296.
24. Riddick, F, and Y. T. Lee. 2008. Representing Layout Information in the CMSD Specification, In Proceedings of the 2008 Winter Simulation Conference, eds. S. J. Mason, R. R. Hill, L. Mönch, O. Rose, T. Jefferson, and J. W. Fowler, Piscataway, New Jersey: Institute of Electrical and Electronics Engineers, Inc.
25. Sheridan, T. B. 1995. Human centred automation: oxymoron or common sense? IEEE, 6.
26. SISO. 2007. Draft core manufacturing simulation data information model part 1: UML model. CMSD Product Development Group, Simulation Interoperability Standards Organization. Available via 〈http://discussions.sisostds.org/ default.asp?action=9&boardid=2&read=39532&fid=24〉 [accessed April 13, 2009]
27. SISO. 2009. Pending standard: Core Manufacturing Simulation Data: UML model, SISO-STD-008-2009. CMSD Product Development Group, Simulation Interoperability Standards Organization. Available at http://discussions. sisostds.org/file.asp?file=CMSDBallotingDraft%2DReviewVersion%2Epdf [accessed July 28, 2009]
28. Skoogh, A., and B. Johansson. 2007. Time-consumption Analysis of Input Data Activities in Discrete Event Simulation Projects, In Proceedings of the Swedish Production Symposium 2007, Gothenburg, Sweden.
29. Visual Components. 〈http://www.visualcomponents.com〉. [accessed April 13, 2009]