Effect of carbon nanotube (CNT) loading on the thermo-mechanical properties and the machinabilty of CNT-reinforced polymer composites

Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008

Volumn 2, Issue , 2009, Pages 203-214

  Samuel, Johnson ^b   Dikshit, Ashutosh ^b,c   DeVor, Richard E ^a,b   Kapoor, Shiv G ^b   Hsia, K Jimmy ^b  

^a Department of Manufacturing ^*  (United States)

^b University of Illinois at Urbana Champaign   (United States)

^c NONE

Author keywords

CNT composites; Micro machining

Indexed keywords

ADIABATIC SHEAR BAND; CHIP MORPHOLOGIES; CUTTING FORCES; CUTTING VELOCITY; DUCTILE-TO-BRITTLE TRANSITION; FRACTURE STRENGTHS; INTERFACE EFFECT; MATERIAL PROPERTY; MICRO-END-MILLING; MINIMUM CHIP THICKNESS; POLYMER PHASE; REINFORCED POLYMER COMPOSITES; THERMAL SOFTENING; THERMOMECHANICAL PROPERTIES;

BRITTLE FRACTURE; CARBON NANOTUBES; DUCTILE FRACTURE; LOADS (FORCES); MECHANICAL PROPERTIES; MICROMACHINING; PHASE INTERFACES; POLYMERS; REINFORCED PLASTICS; SHEAR BANDS; SURFACE ROUGHNESS;

LOADING;

EID: 77951538231     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (23)

1. Du, F., Fischer, J. E., and Winey, K. I., 2003, "Coagulation method for preparing single-walled carbon nanotube/poly (methyl methacrylate) composites and their modulus, electrical conductivity, and thermal stability", Journal of Polymer Science, Part B: Polymer Physics, 41(24), pp. 3333-3338.
2. Stewart, R., 2004, "Nanocomposites: Microscopic reinforcements boost polymer performance", Plastics Engineering, 60(5), pp. 22-29.
3. Kymakis, E., Alexandou, I., and Amaratunga, G. A., 2001, "Single-walled carbon nanotube-polymer composites: Electrical, optical and structural investigation", Synthetic Metals, 127(1-3), pp. 59-62.
4. Samuel, J., DeVor, R.E., Kapoor, S.G., and Hsia, J., 2005, "Experimental Investigation of the Machinability of Polycarbonate Reinforced With Multiwalled Carbon Nanotubes", ASME Journal of Manufacturing Science and Engineering, 128, pp. 465-473.
5. Ghai, I., Samuel, J., DeVor, R. E., and Kapoor, S. G., 2007, "Effect of Carbon Nanotube Loading on the Machinability of Polycarbonate Nanocomposites," Proceedings of International and INCOMM-6 Conference, Future Trends in Composite Materials and Processing, Dec. 12-14, 2007.
6. Higgins, B. A., and Brittain, W. J., 2005, "Polycarbonate carbon nanofiber composites", European Polymer Journal, 41(5), pp. 889-893.
7. Dikshit, A., Samuel, J., DeVor, R. E. and Kapoor, S. G., 2008, "A microstructure-level material model for simulating the machining of carbon nanotube reinforced polymer composites", ASME Journal of Manufacturing Science and Engineering, 130(3), CID 031110.
8. Pötschke, P., Bhattacharyya, A. R., Janke A. and Goering H., 2003, "Melt mixing of polycarbonate/multi-wall carbon nanotube composites", Composite Interfaces, 10(4-5), pp. 389-404.
9. Bershtein, V. A., Egorova, L. M., Yakushev, P. N., Pissis, P., Sysel, P. and Brozova, L., 2002, "Molecular dynamics in nanostructured polyimide-silica hybrid materials and their thermal stability", Journal of Polymer Science, 40(10), pp. 1056-1069.
10. Barrau, S., Demont, P., Maraval, C, Bernes, A. and Lacabanne, C, 2005, "Glass transition temperature depression at the percolation threshold in carbon nanotube-epoxy resin and polypyrrole-epoxy resin composites", Macromolecular Rapid Communications, 26(5), pp. 390-394.
11. Wonga, M., Paramsothyb, M., Xud, X. J., Renc, Y., Lib, S. and Liao, K., 2003, "Physical interactions at carbon nanotube-polymer interface", Polymer, 44(25), pp. 7757-7764.
12. Weule, H., Huntrup, V., and Tritschle, H., 2001, "Micro-cutting of steel to meet new requirements in miniaturization," CIRP Annals, 50, pp. 61-64.
13. Kobayashi, A., 1967, "Machining of plastics", McGraw-Hill Inc., NY, pp. 1-35, 94-106.
14. Liu, X., DeVor, R. E., Kapoor, S. G., 2006, "An analytical model for the prediction of minimum chip thickness in micromachining", ASME Journal of Manufacturing Science and Engineering, 128(2), pp. 474-481.
15. Felder, E. and Bucaille, J., 2006, "Mechanical analysis of the scratching of metals and polymers with conical indenters at moderate and large strains", Tribology International, 39(2), PP. 70-87.
16. Satapathy, B. K., Weidisch, R., Petra, P., and Andreas, J., 2007, "Tough-to-Brittle Transition in Multiwalled Carbon Nanotube (MWNT)/Polycarbonate Nanocomposites," Composites Science and Technology, 67(5), pp. 867-879.
17. Dikshit, A., Samuel, J., DeVor, R. E. and Kapoor, S. G., 2008, "Microstructure-level machining simulation of carbon nanotube reinforced polymer composites -Part 1: Model development and validation", ASME Journal of Manufacturing Science and Engineering, 130(3), CID 031114.
18. Dikshit, A., Samuel, J., DeVor, R. E. and DeVor, R. E., 2008, "Microstructure-level machining simulation of carbon nanotube reinforced polymer composites -Part 2: Model interpretation and application", ASME Journal of Manufacturing Science and Engineering, 130(3), CID 031115.
19. Shih, J. A., Luo, J., Lewis, M. A., and Strenkowski, J. S., 2004, "Chip Morphology and Forces in End Milling of Elastomers", ASME Journal of Manufacturing Science and Engineering, 126 (1), pp. 124-130.
20. Xiao, K. Q. and Zhang, L. C., 2002, "The role of viscous deformation in the machining of polymers", International Journal of Mechanical Sciences,44(11), pp. 2317-2336.
21. Childs, T. H. C., and Rowe, G. W., 1973, "Physics in Metal Cutting," Reports on Progress in Physics, 36, pp. 223-288.
22. Enomoto, K., Yasuhara, T., Kitakata, S., Murakami, H., and Ohtake, N., 2004, "Frictional Properties of Carbon Nanofiber Reinforced Polymer Matrix Composites," New Diamond and Frontier Carbon Technology, 14, pp. 11-20.
23. Lee, K. and Dornfeld, D. A., 2005, "Micro-burr formation and minimization through process control", Precision Engineering, 29(2), pp. 246-252.