Establishing aerosol exposure predictive models based on vibration measurements

Journal of Hazardous Materials

Volumn 178, Issue 1-3, 2010, Pages 306-311

  Soo, Jhy Charm ^a   Tsai, Perng Jy ^a   Lee, Shih Chuan ^a   Lu, Shih Yi ^b   Chang, Cheng Ping ^c   Liou, Yuh When ^d   Shih, Tung Sheng ^c,e  

^a NATIONAL CHENG KUNG UNIVERSITY   (Taiwan)

^b CHUNG SHAN MEDICAL UNIVERSITY   (Taiwan)

^c INSTITUTE OF OCCUPATIONAL SAFETY AND HEALTH   (Taiwan)

^d CHIA NAN UNIVERSITY OF PHARMACY AND SCIENCE   (Taiwan)

^e CHINA MEDICAL UNIVERSITY   (Taiwan)

Author keywords

Aerosol exposures; Concrete drilling process; Predictive model; Vibration measurement

Indexed keywords

ABRASIVE WEARS; AEROSOL SAMPLING; DRILLING PROCESS; DRILLING SIMULATORS; EMISSION SOURCES; EMPIRICAL MODEL; EXPOSURE CHAMBERS; EXPOSURE CONCENTRATION; GENERALIZED ADDITIVE MODEL; IMPACT WEAR; ORTHOGONAL AXES; PREDICTIVE MODELS; TOTAL SUSPENDED PARTICULATES;

ATMOSPHERIC AEROSOLS; BRITTLE FRACTURE; PREDICTIVE CONTROL SYSTEMS; TOOLS; TRAVELING SALESMAN PROBLEM;

VIBRATION MEASUREMENT;

ABRASION; AEROSOL; BRITTLE FRACTURE; CONCENTRATION (COMPOSITION); CONCRETE; DRILLING; EMISSION INVENTORY; EXPERIMENTAL STUDY; NUMERICAL MODEL; PARTICLE SIZE; PREDICTION; SUSPENDED PARTICULATE MATTER; VIBRATION; WEAR;

ARTICLE; ENVIRONMENTAL EXPOSURE; MEASUREMENT; PARTICLE SIZE; PREDICTION; SIMULATOR; SUSPENDED PARTICULATE MATTER; VIBRATION;

AEROSOLS; HAND; HUMANS; INHALATION EXPOSURE; MODELS, STATISTICAL; OCCUPATIONAL EXPOSURE; PARTICLE SIZE; PARTICULATE MATTER; PREDICTIVE VALUE OF TESTS; VIBRATION;

EID: 77951499804     PISSN: 03043894     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jhazmat.2010.01.079     Document Type: Article

References (38)

1. Cherry N.M., Burgess G.L., Turner S., McDonald J.C. Crystalline silica and risk of lung cancer in the potteries. Occup. Environ. Med. 1998, 55:779-785.
2. Steenland K., Mannetje A., Boffetta P., Stayner L., Attfield M., Chen J., Dosemeci M., Deklerk N., Hnizdo E., Koskela R., Checkoway H. Pooled exposure-response analysis and risk assessment for lung cancer in 10 cohorts of silica-exposed workers: an IARC multicentre study. Cancer Causes Control 2001, 12:773-784.
3. Hughes J.M., Weill H., Rando R.J., Shi R., McDonald A.D., McDonald J.C. Cohort mortality study of North America industrial sand workers. II. Case-referent analysis of lung cancer and silicosis death. Ann. Occup. Hyg. 2001, 45:201-207.
4. McDonald J.C., McDonald A.D., Hughes J.M., Rando R.J., Weill H. Mortality from lung and Kidney disease in a cohort of North American industrial sand workers: an update. Ann. Occup. Hyg. 2005, 49:367-373.
5. 10 pollution in Utah Vally. Arch. Environ. Health 1992, 47:211-217.
6. Schwartz J., Morris R. Air pollution and hospital admissions for cardiovascular disease in Detroit, MI. Am. J. Epidemiol. 1995, 142:927-939.
7. Dockery D.W., Pope C.A., Xu X., Spengler J.D., Ware J.H., Fay M.E., Ferris B.G., Speizer F.E. An association between air pollution and mortality in six U.S. cities. N. Engl. J. Med. 1993, 329:1753-1759.
8. Pope C.A., Thun M.J., Namboodiri M.M., Dockery D.W., Evans J.S., Speizer F.E., Heath C.W. Particulate air pollution is a predictor of mortality in a prospective study of U.S. adults. Am. J. Respir. Crit. Care Med. 1995, 151:669-674.
9. Schwartz J., Dockery D.W., Neas L.M. Is daily mortality associated significantly with fine particles. J. Air Waste Manage. Assoc. 1996, 46:927-939.
10. Buckley T.J., Waldman J.M., Freeman N.C.G., Lioy P.J., Marple V.A., Turner W.A. Calibration, intersampler comparison, and field application of a new PM-10 personal air-sampling impactor. Aerosol Sci. Technol. 1991, 14:380-387.
11. Shen S., Jaques P.A., Zhu Y., Geller M.D., Sioutas C. Evaluation of the SMPS-APS system as a continuous monitor for measuring PM2.5, PM10 and coarse (PM2.5-10) concentrations. Atmos. Environ. 2002, 36:3939-3950.
12. Yanosky J.D., Williams P.L., MacIntosh D.L. A comparison of two direct-reading aerosol monitors with the federal reference method for PM2.5 in indoor air. Atmos. Environ. 2002, 36:107-113.
13. Pagels J., Strand M., Rissler J., Szpila A., Gudmundsson A., Bohgard M., Lillieblad L., Sanati M., Swietlicki E. Characteristics of aerosol particles formed during grate combustion of moist forest residue. J. Aerosol Sci. 2003, 34:1043-1059.
14. Ferge T., Maguhn J., Felber H., Zimmermann R. Particle collection efficiency and particle re-entrainment of an electrostatic precipitator in a sewage sludge incineration plant. Environ. Sci. Technol. 2004, 38:1545-1553.
15. Rabinowicz E. Friction and Wear of Materials 1995, John Wiley and Son, Inc., New York. 2nd ed.
16. Keith S.E., Brammer A.J. Rock drill handle vibration-measurement and hazard estimation. J. Sound Vibr. 1994, 174:475-491.
17. El-Wardany T.I., Gao D., Elbestawi M.A. Tool condition monitoring in drilling using vibration signature analysis. Int. J. Mach. Tools Manuf. 1996, 36:687-711.
18. Bayly P.V., Lamar M.T., Calvert S.G. Low-frequency regenerative vibration and the formation of lobed holes in drilling. J. Manuf. Sci. Eng.-Trans. ASME 2002, 124:275-285.
19. Edwards D.J., Holt G.D. Exposure to hand-arm vibration: implications of new statutory requirements. Build. Res. Inform. 2005, 33:257-266.
20. Phillips J.I., Heyns P.S., Nelson G. Rock drills used in South African mines: a comparative study of noise and vibration levels. Ann. Occup. Hyg. 2007, 51:305-310.
21. Rimell A.N., Notini L., Mansfield N.J., Edwards D.J. Variation between manufacturers' declared vibration emission values and those measured under simulated workplace conditions for a range of hand-held power tools typically found in the construction industry. Int. J. Ind. Ergon. 2008, 38:661-675.
22. Verma D.K., Sebestyen A., Julian J.A., Muir D.C.F., Shaw D.S., Macdougall R. Particle-size distribution of an aerosol and its subfraction. Ann. Occup. Hyg. 1994, 38:45-58.
23. Shen H.W., Hardy H.R., Khair A.W. Laboratory study of acoustic emission and particle size distribution during rotary cutting. Int. J. Rock Mech. Min. Sci. Geomech. Abstr. 1997, 34:635-636.
24. Achanti V.B., Khair A.W. Bit geometry effects on failure characteristics of rock. Min. Eng. 2000, 52:101-107.
25. Achanti V.B., Khair A.W. Cutting efficiency through optimised bit configuration-an experimental study using a simulated continuous miner. Miner. Resour. Eng. 2001, 10:427-434.
26. Page S.J., Reed R., Listak J.M. An expanded model for predicting surface coal mine drill respirable dust emissions. Int. J. Min. Reclam. Environ. 2008, 22:210-221.
27. Jantunen E. A summary of methods applied to tool condition monitoring in drilling. Int. J. Mach. Tools Manuf. 2002, 42:997-1010.
28. Braun S., Lenz E., Wu C.L. Signature analysis applied to drilling. J. Manuf. Sci. Eng.-Trans. ASME 1982, 104:268-276.
29. Baldwin P.E.J., Maynard A.D. A survey of wind speeds in indoor workplaces. Ann. Occup. Hyg. 1998, 42:303-313.
30. Peters T.M., Leith D. Concentration measurement and counting efficiency of the aerodynamic particle sizer 3321. J. Aerosol Sci. 2003, 34:627-634.
31. Sidney Mindess J.F.Y. Concrete 1981, Prentice-Hall, Englewood Cliffs, NJ.
32. International Organization for Standardization (ISO), Mechanical Vibration-Guidelines for the Measurement and the Assessment of Human Exposure to Hand-transmitted Vibration, ISO 5349, ISO, Geneva, 1986.
33. Hastie T.J., Tibshirani R.J. Generalized Additive Models 1990, Chapman and Hall, New York.
34. Wood S.N., Augustin N.H. GAMs with integrated model selection using penalized regression splines and applications to environmental modeling. Ecol. Model. 2002, 157:157-177.
35. Davis J.M., Speckman P. A model for predicting maximum and 8h average ozone in Houston. Atmos. Environ. 1999, 33:2487-2500.
36. Braga A.L.F., Zanobetti A., Schwartz J. The effect of weather on respiratory and cardiovascular deaths in 12 US cities. Environ. Health Perspect. 2002, 110:859-863.
37. Liu Y., Paciorek C.J., Koutrakis P. Estimating regional spatial and temporal variability of PM2.5 concentrations using satellite data, meteorology, and land use information. Environ. Health Perspect. 2009, 117:886-892.
38. Soo J.C., Tsai P.J., Chen C.H., Hsu D.J., Dai Y.T., Chang C.P. Establishing aerosol exposure predictive models based on noise measurements-using concrete drilling as an example. J. Environ. Monit. 2009, 11:1523-1528.