Crystallization, hydrolytic degradation, and mechanical properties of poly (trimethylene terephthalate)/poly(lactic acid) blends

Polymer Bulletin

Volumn 64, Issue 5, 2010, Pages 471-481

  Zou, Hantao ^a   Yi, Changhai ^a   Wang, Luoxin ^a   Xu, Weilin ^a  

^a BEIJING UNIVERSITY OF POSTS AND TELECOMMUNICATIONS   (China)

Author keywords

Crystallization behavior; Hydrolytic degradation; Mechanical property; Poly(lactic acid) (PLA); Poly(trimethylene terephthalate) (PTT)

Indexed keywords

AMORPHOUS STATE; BLEND FILMS; COLD-CRYSTALLIZATION; COMPOSITION RANGES; COOLING PROCEDURE; CRYSTALLINE PHASE; CRYSTALLIZATION BEHAVIOR; ELONGATION AT BREAK; ENDOTHERMIC PEAKS; EXOTHERMAL PEAK; FITTING PARAMETERS; GLASS TRANSITION TEMPERATURE; GORDON-TAYLOR EQUATION; HEATING CURVES; HYDROLYTIC DEGRADATION; MELT CRYSTALLIZATION; POLY(LACTIC ACID); POLY(TRIMETHYLENE TEREPHTHALATE); POLYLACTIC ACIDS; PURE COMPONENTS; RECRYSTALLIZATIONS; TEREPHTHALATE;

BODY FLUIDS; CRYSTALLIZATION; DEGRADATION; HEATING; LACTIC ACID; ORGANIC ACIDS; TENSILE STRENGTH;

MECHANICAL PROPERTIES;

EID: 77951205940     PISSN: 01700839     EISSN: None     Source Type: Journal    
DOI: 10.1007/s00289-009-0191-3     Document Type: Article

References (27)

1. Bhuvanesh G, Nilesh R, Hilbornb J (2007) Poly(lactic acid) fiber: an overview. Prog Polym Sci 32:455-482
2. Ikada Y, Tsuji H (2000) Biodegradable polyesters for medical and ecological applications. Macromol Rapid Commun 21:117-132
3. Anderson JM, Shive MS (1997) Biodegradation and biocompatibility of PLA and PLGA micro-spheres. Adv Drug Deliv Rev 28:5-24
4. Jamshidi K, Hyon SH, Ikada Y (1988) Thermal characterizaton of polylactides. Polymer 29:2229-2234
5. Acar I, Ozgümüş S, Kaşgöz A (2006) Nonisothermal crystallization kinetics and morphology of poly(ethylene terephthalate) modified with poly(lactic acid). Polym Plast Technol 45:351-359
6. Anderson KS, Hillmyer MA (2004) The influence of block copolymer microstructure on the toughness of compatibilized polylactide/polyethylene blends. Polymer 45:8809-8823
7. Narendra R, Digvijay N, Yang YQ (2008) Polylactic acid/polypropylene polyblend fibers for better resistance to degradation. Polym Degrad Stab 93:233-241
8. Biresaw G, Carriere C (2002) Interfacial tension of polylactic acid/polystyrene blends. J Polym Sci B Polym Phys 40:2248-2258
9. Hu Y, Rogunov M, Topolkaraev V et al (2003) Aging of poly(lactide)/ poly(ethylene glycol) blends. Part 1. Poly(lactide) with low stereoregularity. Polymer 44:5701-5710
10. Xu H, Wang LH, Teng CQ et al (2008) Biodegradable composites: ramie fibre reinforced PLLA-PCL composite prepared by in situ polymerization process. Polym Bull 61:663-670
11. Zhang GB, Zhang JM, Wang SG et al (2003) Miscibility and phase structure of binary blends of polylactide and poly(methyl methacrylate). J Polym Sci Part B Polym Phys 41:23-30
12. Su ZZ, Guo WH, Liu YJ et al. (2009) Non-isothermal crystallization kinetics of poly(lactic acid)/modified carbon black composite. Polym Bull 62:629-642
13. Fathilah A, Chang YW, Kang SC (2009) Thermal, mechanical and rheological properties of poly(lactic acid)/epoxidized soybean oil blends. Polym Bull 62:91-98
14. Guerric EG, Eguiazábal JI, Nazabal (2007) Influence of compatibilization on the mechanical behavior of poly(trimethylene terephthalate)/poly(ethylene-octene) blends. J Eur Polym 43:1027-1037
15. Run MT, Wang YJ, Yao CG et al (2006) Non-isothermal crystallization kinetics of poly(trimethylene terephthalate)/poly(ethylene 2,6-naphthalate) blends. Thermochim Acta 447:13-21
16. Krutphun P, Supaphol P (2005) Thermal and crystallization characteristics of poly(trimethylene terephthalate)/poly(ethylene naphthalate) blends. Eur Polym J 41:1561-1568
17. Jafari SH, Yavari A, Asadinezhad A et al (2005) Correlation of morphology and rheological response of interfacially modified PTT/m-LLDPE blends with varying extent of modification. Polymer 46:5082-5093
18. Huang JM (2003) Polymer blends of poly(trimethylene terephthalate) and polystyrene compatibilized by styrene-glycidyl methacrylate copolymers. J Appl Polym Sci 88:2247-2252
19. Xue ML, Sheng J, Chuah HH et al (2004) Miscibility, morphology, and crystallization behavior of PTT/PC blends. J Macromol Sci Part B Polym Phys 43:1045-1061
20. Liang H, Xie F, Guo FQ et al (2008) Non-isothermal crystallization behavior of poly(ethylene terephthalate)/poly(trimethylene terephthalate) blends. Polym Bull 60:115-127
21. Liang H, Xie F, Chen B et al (2008) Miscibility and melting behavior of poly(ethylene terephthalate)/poly(trimethylene terephthalate) blends. J Appl Polym Sci 107:431-437
22. Brostow W, Chiu R, Kalogeras MI (2008) Prediction of glass transition temperatures: binary blends and copolymers. Mater Lett 62:3152-3155
23. Sirmoaon P, Dangseeyun N, Supaphol P (2004) Multiple melting behavior in isothermally crystallized poly(trimethylene terephthalate). Eur Polym J 40:599-608
24. Li HD, Nie W, Deng C (2009) Crystalline morphology of poly(L-lactic acid) thin films. Eur Polym J 45:123-130
25. Acar I, Durmuş A, Ozgümüş S (2007) Nonisothermal crystallization kinetics and morphology of poly(ethylene terephthalate) modified with poly(lactic acid). J Appl Polym Sci 106:4180-4191
26. Supaphol P, Dangseeyun N, Thanomkiat P (2004) Thermal, crystallization, mechanical, and rheo-logical characteristics of poly(trimethylene terephthalate)/poly(ethylene terephthalate) blends. J Polym Sci Polym Phys 42:676-686
27. Peesan M, Supaphol P, Rujiravanit R (2005) Preparation and characterization of hexanoyl chitosan/polylactide blend films. Carbohydr Polym 60:343-350