Wear behavior of plant fiber (Pine-Bark) and cement kiln dust-reinforced polyester composites using Taguchi experimental model

Journal of Composite Materials

Volumn 44, Issue 5, 2010, Pages 559-574

  Patnaik, Amar ^a   Satapathy, Alok ^b   Dwivedy, Maheshwar ^c   Biswas, Sandhyarani ^b  

^a NATIONAL INSTITUTE OF TECHNOLOGY   (India)

^b NATIONAL INSTITUTE OF TECHNOLOGY   (India)

^c BIRLA INSTITUTE OF TECHNOLOGY AND SCIENCE   (India)

Author keywords

Cement kiln dust; Composites; GA; Pine bark; Taguchi method

Indexed keywords

CEMENT KILN DUSTS; COMPOSITE SAMPLES; COMPOSITES; CONTROL FACTORS; DRY SLIDING WEAR; EXPERIMENTAL MODELS; EXPERIMENTAL OBSERVATION; FIBER REINFORCEMENT; FILLER CONTENTS; GA; MATHEMATICAL CORRELATION; MATRIX; MEASURED DATA; OPTIMAL PARAMETER COMBINATIONS; ORTHOGONAL ARRAY; PIN-ON-DISC-TESTS; PINE-BARK; PLANT FIBERS; POLYESTER COMPOSITES; PREDICTIVE EQUATIONS; REINFORCING COMPONENTS; SLIDING WEAR; TAGUCHI; WEAR BEHAVIORS; WEAR RATES; WEAR TEST; WEIGHT FRACTIONS;

CEMENT PLANTS; CEMENTS; DESIGN OF EXPERIMENTS; DUST; FILLERS; FURNACES; GENETIC ALGORITHMS; KILNS; OPTIMIZATION; REGRESSION ANALYSIS; REINFORCEMENT; TAGUCHI METHODS;

WEAR OF MATERIALS;

EID: 77951063150     PISSN: 00219983     EISSN: 1530793X     Source Type: Journal    
DOI: 10.1177/0021998309346547     Document Type: Article

References (38)

1. Mehta, G., Drzal, L.T., Mohanty, A.K. and Misra, M. (2005). Effect of Fiber Surface Treatment on the Properties of Biocomposites From Nonwoven Industrial Hemp Fiber Mats and Unsaturated Polyester Resin, Journal of Applied Polymer Science, 99(2): 1055-1068.
2. Ray, D., Sarkar, B.K. and Bose, N. (2002). Impact Fatigue Behaviour of Vinylester Resin Matrix Composites Reinforced With Alkali Treated Jute Fibres, Composites Part A, 33(2): 233-241.
3. George, J., Sreekala, M.S. and Thomas, S. (2001). A Review on Interface Modification and Characterization of Natural Fiber Reinforced Plastic Composites, Polymer Engineering and Science, 41(9): 1471-1485.
4. Gassan, J. and Bledzki, A.K. (1999). Possibilities for Improving the Mechanical Properties of Jute/Epoxy Composites by Alkali Treatment of Fibres, Composites Science and Technology, 59(9): 1303-1309.
5. Aziz, S.H. and Ansel, M.P. (2004). The Effect of Alkalization and Fibre Alignment on the Mechanical and Thermal Properties of Kenaf and Hemp Bast Fibre Composites: Part 1 - Polyester Resin Matrix, Composites Science and Technology, 64: 1219-1230.
6. Felix, J.M. and Gatenholm, P. (1991). The Nature of Adhesion in Composites of Modified Cellulose Fibers and Polypropylene, Journal of Applied Polymer Science, 42: 609.
7. Dalvag, H., Klason, C. and Stromwall, H.E. (1985). Effects of Cellulose Fibers in Polypropylene Composites, International Journal of Polymeric Materials, 11: 9.
8. Hamada, H., Ikuta, N., Nishida, N. and Maekaewa, Z. (1994). Effect of Interfacial Silane Network Structure on Interfacial Strength in Glass Fibre Composites, Composites, 25: 512.
9. Belgacem, M.N., Bataille, P. and Sapieha, S. (1994). Effect of Corona Modification on the Mechanical Properties of Polypropylene/Cellulose Composites, Journal of Applied Polymer Science, 53: 397.
10. Eichhorn, S.J., Baillie, C.A., Zafeiropoulos, N., Mwaikambo, L.Y., Ansell, M.P., Dufresne, A., Entwistle, K.M., Herrera-Franco, P.J., Escamilla, G.C., Groom, L.H., Hughes, M., Hill, C., Rials, T.G. and Wild, P.M. (2001). Current International Research into Cellulosic Fibres and Composites, Journal of Materials Science, 36: 2107.
11. Jacob, M., Thomas, S. and Varughese, K.T. (2004). Mechanical Properties of Sisal/Oil Palm Hybrid Fiber Reinforced Natural Rubber Composites, Composites Science and Technology, 64: 955-965. (Pubitemid 38459652)
12. Joseph, K., Thomas, S. and Pavithran, C. (1996). Effect of Chemical Treatment on the Tensile Properties of Short Sisal Fiber-reinforced Polyethylene Composite, Polymer, 37: 5139-5145.
13. Joseph, S., Sreekalab, M.S., Oommena, Z., Koshyc, P. and Thomas, S. (2002). A Comparison of the Mechanical Properties of Phenol Formaldehyde Composites Reinforced with Banana Fibres and Glass Fibres, Composites Science and Technology, 62: 1857-1868.
14. Varma, I.K., Ananthakrishnan, S.R. and Krishnamoorthi, S. (1989). Comp of Glass/Modified Jute Fabric and Unsaturated Polyester, Composites, 20: 383.
15. Pothana, L.A., Oommenb, Z. and Thomas, S. (2003). Dynamic Mechanical Analysis of Banana Fiber Reinforced Polyester Composites, Composites Science and Technology, 63(2): 283-293.
16. Tong, J., Arnell, R.D. and Ren, L. (1998). Dry Sliding Wear Behaviour of Bamboo, Wear, 221: 37-46.
17. Tong, J., Ma, Y., Chen, D., Sun, J. and Ren, L. (2005). Effects of Vascular Fiber Content on Abrasive Wear of Bamboo, Wear, 259: 37-46.
18. Hornsby, P.R., Hinrichsen, E. and Traverdi, K. (1997). Preparation and Properties of Polypropylene Composites Reinforced With Wheat and Flax Straw Fibres. Part I. Characterisation, Journal of Materials Science, 32: 443-449.
19. Pothan, L.A., Thomas, S. and Neelakantan, N.R. (1997). Short Banana Fibre Reinforced Polyester Composites: Mechanical, Failure and Aging Characteristics, Journal of Reinforced Plastics and Composites, 16: 744.
20. Hepworth, D.G., Bruce, D.M., Vincent, J.F.V. and Jeronimidis, G. (2000). The Manufacture and Mechanical Testing of Thermosetting Natural Fibre Composites, Journal of Materials Science, 35: 293-298.
21. Hepworth, D.G., Hobson, R.N., Bruce, D.M. and Farrent, J.W. (2000). The Use of Untreated Hemp in Composite Manufacture, Composites Part A, 31: 1279-1283.
22. Joseph, P.V., Kuruvilla, J. and Thomas, S. (2002). Short Sisal Fibre Reinforced Polypropylene Composite: The Role of Interface Modification on Ultimate Properties, Composite Interfaces, 9(2): 171-205.
23. Monteiro, S.N., Rodriquez, R.J.S. and De Souza, M.V. (1998). Sugarcane Bagasse Waste as Reinforcement in Low Cost Composites, Advanced Performance Materials, 5: 183-191.
24. Aggarwal, L.K. (1995). Bagasse-reinforced Cement Composites, Cement and Concrete Composites, 17: 107-112.
25. Tong, J., Ren, L.Q., Li, J.Q. and Chen, B.C. (1995). Abrasive Wear Behaviour of Bamboo, Tribology International, 28: 323-327.
26. Yahou, T. and Sakamoto, S. (1993). Abrasive Properties of Bamboo, Japan Journal of Tribology, 38: 491-497.
27. Chand, N. and Dwivedi, U.K. (2007). High Stress Abrasive Study on Bamboo, Journal of Material Processing and Technology, 183: 155-159.
28. Chand, N., Dwivedi, U.K. and Acharya, S.K. (2007). Anisotropic Abrasive Wear Behaviour of Bamboo (Dentrocalamus strictus), Wear, 262(9/10): 1031-1037.
29. El-Tayeb, N.S.M. (2008). A Study on the Potential of Sugarcane Fibers/Polyester Composite for Tribological Applications, Wear, 265(1-2): 223-235.
30. Pavithran, C., Muckerjee, P.S., Brahmakumar, M. and Damodaran, A. (1987). Impact Properties of Natural Fibre Composites, Journal of Materials Science Letters, 7: 882-884.
31. Hancox, N.L. (1981). Fibre Composite Hybrid Materials, Macmillan Publishers, New York.
32. Mahapatra, S.S. and Patnaik, A. (2007). Optimization of Wire Electrical Discharge Machining (WEDM) Process Parameters Using Taguchi Method, International Journal of Advanced Manufacturing Technology, 34: 911-925.
33. Mahapatra, S.S., Patnaik, A. and Khan, M.S. (2006). Development and Analysis of Wear Resistance Model for Composites of Aluminium Reinforced With Redmud, The Journal of Solid Waste Technology and Management, 32(1): 28-35.
34. Patnaik, A., Biswas, S. and Mahapatra, S.S. (2007). An Evolutionary Approach for Parameter Optimization of Submerged Arc Welding in Hard Facing Process, International Journal of Manufacturing Research, 2(4): 462-483.
35. Mahapatra, S.S., Patnaik, A., Satapathy, A. and Dash, R.R. (2008). Taguchi Method Applied to Parametric Appraisal of Erosion Behavior of GF-reinforced Polyester Composites, Wear, 265: 214-222.
36. Patnaik, A., Satapathy, A., Mahapatra, S.S. and Dash, R.R. (2008). A Modeling Approach for Prediction of Erosion Behavior of Glass Fiber-Polyester Composites, Journal of Polymer Research, 15(2): 147-160. (Pubitemid 351399910)
37. Patnaik, A., Satapathy, A., Mahapatra, S.S. and Dash, R.R. (2009). Modeling and Prediction of Erosion Response of Glass Reinforced Polyester-Flyash Composites, Journal of Reinforced Plastics and Composites, 28: 513-536.
38. Glen, S.P. (1993). Taguchi Methods: A Hands on Approach, Addison-Wesley, New York.