Wetting response of KrF laser ablated polyimide surfaces

Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms

Volumn 268, Issue 10, 2010, Pages 1626-1630

  Oliveira, V ^a,c   Nunes, B ^b   Vilar, R ^b,c  

^a INSTITUTO SUPERIOR DE ENGENHARIA DE LISBOA   (Portugal)

^b INSTITUTO SUPERIOR TÉCNICO   (Portugal)

^c ICEMS   (Portugal)

Author keywords

Excimer laser; Microtexturing; Polyimide; Wettability

Indexed keywords

APPARENT CONTACT ANGLE; AREAL DENSITIES; AVERAGE DISTANCE; CONE DIMENSIONS; FLUENCES; KRF LASERS; MATERIAL ABLATION; MICROTEXTURING; STATIC CONTACT ANGLE; WATER CONTACT ANGLE;

ANGLE MEASUREMENT; CONTACT ANGLE; EXCIMER LASERS; GAS LASERS; KRYPTON; POLYIMIDES; WETTING;

SURFACES;

EID: 77951023617     PISSN: 0168583X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.nimb.2010.03.006     Document Type: Article

References (35)

1. Blossey R. Self-cleaning surfaces - virtual realities. Nat. Mater. 2 (2003) 301
2. Zhang J., France P., Radomyselskiy A., Datta S., Zhao J., and van Ooij W. Hydrophobic cotton fabric coated by a thin nanoparticulate plasma film. J. Appl. Polym. Sci. 88 (2003) 1473
3. McHale G., Shirtcliffe N.J., and Newton M.I. Super-hydrophobic and super-wetting surfaces: analytical potential?. Analyst 129 (2004) 284
4. Bhushan B., Jung Y.C., and Koch K. Micro-, nano- and hierarchical structures for superhydrophobicity, self-cleaning and low adhesion. Philos. Trans. Roy. Soc. A 367 (2009) 1631
5. Barthlott W., and Neinhuis C. Purity of the sacred lotus, or escape from contamination in biological surfaces. Planta 202 (1997) 1
6. Oner D., and McCarthy T.J. Ultrahydrophobic surfaces. Effects of topography length scales on wettability. Langmuir 16 (2000) 7777
7. Chan C.M., Ko T.M., and Hiraoka H. Polymer surface modification by plasmas and photons. Surf. Sci. Rep. 24 (1996) 1
8. Qian B., and Shen Z. Fabrication of superhydrophobic surfaces by dislocation-selective chemical etching on aluminum, copper, and zinc substrates. Langmuir 21 (2005) 9007
9. Shirtcliffe N.J., McHale G., Newton M.I., and Perry C.C. Wetting and wetting transitions on copper-based super-hydrophobic surfaces. Langmuir 21 (2005) 937
10. Aronov D., and Rosenman G. Surface energy modification by electron beam. Surf. Sci. 601 (2007) 5042
11. Oliveira V., and Vilar R. KrF pulsed laser ablation of polyimide. Appl. Phys. A 92 (2008) 957
12. Oliveira V., Ausset S., and Vilar R. Surface micro/nanostructuring of titanium under stationary and non-stationary femtosecond laser irradiation. Appl. Surf. Sci. 255 (2009) 7556
13. Her T.H., Finlay R.J., Wu C., Deliwala S., and Mazur E. Microstructuring of silicon with femtosecond laser pulses. Appl. Phys. Lett. 73 (1998) 1673
14. 3-TiC ceramics. Appl. Phys. A 81 (2005) 1157
15. Yoon T.O., Shin H.J., Jeoung S.C., and Park Y. Formation of superhydrophobic poly(dimethysiloxane) by ultrafast laser induced surface modification. Opt. Express 16 (2008) 12715
16. Zorba V., Persano L., Pisignano D., Athanassiou A., Stratakis E., Cingolani R., Tzanetakis P., and Fotakis C. Making silicon hydrophobic: wettability control by two-lengthscale simultaneous patterning with femtosecond laser irradiation. Nanotechnology 17 (2006) 3234
17. Zorba V., Stratakis E., Barberoglou M., Spanakis E., Tzanetakis P., and Fotakis C. Tailoring the wetting response of silicon surfaces via fs laser structuring. Appl. Phys. A 93 (2008) 819
18. Zorba V., Stratakis E., Barberoglou M., Spanakis E., Tzanetakis P., Anastasiadis S.H., and Fotakis C. Biomimetic artificial surfaces quantitatively reproduce the water repellency of a lotus leaf. Adv. Mater. 20 (2008) 4049
19. Wang Z.K., Zheng H.Y., Lim C.P., and Lam Y.C. Polymer hydrophilicity and hydrophobicity induced by femtosecond laser direct irradiation. Appl. Phys. Lett. 95 (2009) 111110
20. Baldacchini T., Carey J., Zhou M., and Mazur E. Superhydrophobic surfaces prepared by microstructuring of silicon using a femtosecond laser. Langmuir 22 (2006) 4917
21. Wu B., Zhou M., Li J., Ye X., Li G., and Cai L. Superhydrophobic surfaces prepared by microstructuring of stainless steel using a femtosecond laser. Appl. Surf. Sci. 256 (2009) 61
22. Oliveira V., and Vilar R. Modification of polyimide wettability by KrF pulsed laser ablation. Microsc. Microanal. 14 Suppl. 3 (2008)
23. Cheng P., Li D., Boruvka L., Rotenberg Y., and Newman A.W. Automation of axisymmetric drop shape analysis for measurements of interfacial tensions and contact angles. Colloids Surf. 43 (1990) 151
24. Chen W., Fadeev A.Y., Hsieh M.C., Oner D., Youngblood J., and McCarthy T.J. Ultrahydrophobic and ultralyophobic surfaces: some comments and examples. Langmuir 15 (1999) 3395
25. Lippert T. Interaction of photons with polymer: from surface modification to ablation. Plasma Process. Polym. 2 (2005) 525
26. Brezini A., and Zekri N. X-ray photoelectron spectroscopy analysis of polyimide films modified by ultraviolet pulsed laser radiation at 193 nm. J. Appl. Phys. 17 (1994) 2015
27. Lipper T., Ortelli E., Panitz J.C., Raimondi F., Wambach J., Wei J., and Wokaun A. Imaging-XPS/Raman investigation on the carbonization of polyimide after irradiation at 308 nm. Appl. Phys. A 69 (1999) S651
28. Kietzig A., Hatzikiriakos S., and Englezos P. Patterned superhydrophobic metallic surfaces. Langmuir 25 (2009) 4821
29. Serro A.P., and Saramago B. Influence of sterilization on the mineralization of titanium implants induced by incubation in various biological model fluids. Biomaterials 24 (2003) 4749
30. Wenzel R.N. Resistance of solid surfaces to wetting by water. Ind. Eng. Chem. 28 (1936) 988
31. Cassie A.B.D., and Baxter S. Wettability of porous surfaces. Trans. Faraday Soc. 40 (1944) 546
32. Marmur A. Wetting on hydrophobic rough surfaces: to be heterogeneous or not to be?. Langmuir 19 (2003) 8343
33. Bittoun E., and Marmur A. Optimizing super-hydrophobic surfaces: criteria for comparison of surface topographies. J. Adhes. Sci. Technol. 23 (2009) 401
34. Barbieri L., Wagner E., and Hoffmann P. Water wetting transition parameters of perfluorinated substrates with periodically distributed flat-top microscale obstacles. Langmuir 23 (2007) 1723
35. Quéré D., Lafuma A., and Bico J. Slippy and sticky microtextured solids. Nanotechnology 14 (2003) 1109