Effect of time, temperature, and draw down on interlayer peel strength during coextrusion coating, film casting, and film blowing

TAPPI 2008 PLACE Conference: Innovations in Flexible Consumer Packaging

Volumn , Issue , 2008, Pages

  Morris, Barry A ^a  

^a DUPONT COMPANY   (United States)

Author keywords

Blown film; Cast film; Coextrusion; EVOH; Extrusion coating; Peel strength; Process time; Tie resins

Indexed keywords

BLOWN-FILMS; CAST FILM; EXTRUSION COATING; PEEL STRENGTH; PROCESS TIME;

COATINGS; RESINS;

COEXTRUSION;

EID: 77950683815     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (26)

1. Morris, B. A., "Factors Influencing Adhesion in Coextruded Structures," TAPPI Journal, Vol. 75, No. 8, Aug. 1992, pgs. 107-110.
2. Antonov, V. and Soutar, A., "Foil Adhesion With Copolymers: Time in the Air Gap," TAPPI 1991 Polymers, Laminations & Coatings Conference Proceedings, TAPPI PRESS, Atlanta, 553 (1991).
3. Morris, B. A., "The Influence of Stress on Peel Strength of Acid Copolymers to Foil," presented at the 1998 TAPPI Polymers, Laminations and Coatings Conference, Aug. 1998.
4. Morris, B. A. and Suzuki, N., "The Case Against Oxidation as the Primary Factor for Bonding Acid Copolymers to Foil," presented at the 2000 TAPPI Polymers, Laminations and Coatings Conference, Aug. 2000.
5. Morris, B. A., "The Effect of Processing Variables on Peel Strength in Coextruded Blown Film," presented at the 1996 SPE ANTEC Conference, May 1996.
6. Morris, B. A., "Peel Strength Issues in the Blown Film Coextrusion Process," presented at the 1996 TAPPI Polymers, Laminations and Coatings Conference, Aug. 1996.
7. Wu, S., Polymer Interface and Adhesion, Chapter 13, Marcel Dekker, Inc., New York, 1982.
8. Trouilhet, Y. and Morris, B. A., "Prediction of Temperature Profiles Across Coating and Substrate in the Nip," presented at the 1999 TAPPI Polymers, Laminations and Coatings Conference, Aug. 1999.
9. Canning, K., Bian, B., and Co, A., Film Casting of a Low Density Polyethylene Melt," Annual Technical Conference - Society of Plastics Engineers (1999).
10. Morris, B. A., "Understanding Why Adhesion in Extrusion Coating Decreases With Diminishing Coating Thickness," J. Plastic Film & Sheeting, submitted for publication.
11. Morris, B. A., "Understanding Why Adhesion in Extrusion Coating Decreases With Diminishing Coating Thickness, Part III: Analysis of Peel Test," TAPPI PLACE Conference, St. Louis, MO, September 2007.
12. Kinloch, A. J., Lau, C. C., and Williams, J. G., "The Peeling of Flexible Laminates," International Journal of Fracture, 66, 45-70 (1994).
13. Morris, B. A., "The Effect of Coextrusion on Bubble Kinematics Temperature Distribution and Property Development in the Blown Film Process," J. Plastic Film & Sheeting, Vol. 15, No. 1, Jan. 1999, pgs. 25-36.
14. Bullwinkel, M. D., Campbell, G. A., Rasmussen, D. H., and Brancewitz, C. J., "Structure Development During Film Blowing," SPE ANTEC, 2001.
15. Ghaneh-Fard, A., Carreau, P. J., and Lafleur, P. G., "Application of Birefringence to Film Blowing," J. Plastic Film & Sheeting, 12(1), 68-86 (1996). (Pubitemid 126617775)
16. Giriprasath, G. and Ogale, A. A., "Processing-Structure Relationship in Bilayer Polyolefin Blown Films," SPE ANTEC 2006.
17. Morris, B. A., "Understanding Why Adhesion in Extrusion Coating Decreases With Diminishing Coating Thickness, Part I: Penetration of Porous Substrates," TAPPI PLACE Conference, Las Vegas, NV, September 2005.
18. Farber, R. and Dealy, J., "Strain History of the Melt in Film Blowing," Poly Eng Sci, 14 (6), 435 (1974).
19. Kanai, T. and White, J. L., "Kinematics, Dynamics and Stability of the Tubular Film Extrusion of Various Polyethylenes," Poly Eng Sci, 24(15), 1185-1201 (1984). (Pubitemid 14662109)
20. Simpson, D. M. and Harrison, I. R., "The Use of Deformation Rates in the Scale-Up of Polyethylene Blown Film," ANTEC 91, 203.
21. Huang, T. A. and Campbell, G. A., "Deformation History of LLDPE/LDPE Blends on Blown Film Equipment Adv Poly Tech, 5 (3), 181.
22. Babel, A. K. and Campbell, G. A., "Correlating the Plastic Strain With the Properties of the Low Density Polyethylene Blown Film," J. Plastic Film & Sheeting, 9, 246 (July 1993)
23. Campbell, G. A. and Babel, A. K., "Physical Properties and Processing Conditions Correlations of the LDPE/LLDPE Tubular Blown Films," Macromol. Symp. 101, 199 (1996).
24. Butler, T. I., Lai, S. Y., Patel, R., and Spuria, J., "Blown Film Frost Line-Freeze Line Interactions," 1993 TAPPI Polymer, Laminations & Coatings Conference, 13.
25. Butler, T. I., Lai, S. Y., and Patel, R., "Scale-Up Factors Effecting Crystallization in Polyolefin Blown Film," 1994 TAPPI Polymer, Laminations & Coatings Conference, 289.
26. Ghaneh-Fard, A., Carreau, P. J., and Lafleur, P. G., "Study of Kinematics and Dynamics of Film Blowing of a Linear Low Density Polyethylene," SPE ANTEC 1996, 111.