Prediction of cutting force and temperature rise in the end-milling operation

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Volumn 220, Issue 10, 2006, Pages 1577-1587

  Palanisamy, P ^a   Rajendran, I ^b   Shanmugasundaram, S ^c   Saravanan, R ^a  

^a KUMARAGURU COLLEGE OF TECHNOLOGY   (India)

^b BANNARI AMMAN INSTITUTE OF TECHNOLOGY   (India)

^c Government Arts College   (India)

Author keywords

Cutting force; Finite element analysis; Milling; Thermal analysis

Indexed keywords

CUTTING FORCES; CUTTING PARAMETERS; CUTTING SPEED; CUTTING TEMPERATURE; DEPTH OF CUT; DIMENSIONAL ACCURACY; DYNAMIC CUTTING; END MILLING; END-MILLING OPERATIONS; ENERGY PARTITION; FINITE ELEMENT ANALYSIS; FRICTION ZONE; INFRARED PYROMETERS; K-TYPE THERMOCOUPLES; MACHINING CONDITIONS; MAXIMUM TEMPERATURE; MILLING TOOLS; MODEL PREDICTION; SURFACE PLOTS; TANGENTIAL CUTTING FORCE; TEMPERATURE RISE; THERMAL ANALYSIS; THREE-AXIS; THRUST FORCES; TOOL CONDITION MONITORING; TOOL LIFE; TOOL-CHIP INTERFACE TEMPERATURES; WORKPIECE DEFLECTION;

CONDITION MONITORING; FINITE ELEMENT METHOD; FORECASTING; MACHINERY; MATHEMATICAL OPERATORS; MATLAB; METAL ANALYSIS; MILLING (MACHINING); THERMOANALYSIS; THERMOCOUPLES; TOOL STEEL;

METAL CUTTING;

EID: 77950561909     PISSN: 09544054     EISSN: None     Source Type: Journal    
DOI: 10.1243/09544054JEM542     Document Type: Article

References (20)

1. Taylor, F. W. On the art of cutting metals. Trans. ASME, 1907, 28, 31-350.
2. Lacerda, H. B. and Lima, V. T. Evaluation of cutting forces and prediction of chatter vibrations in milling. J. Bras. Soc. Mech. Sci. Engng, 2004, 26(1), 74-81.
3. Huang, Y. and Liang, S. Y. Cutting forces modeling considering the effect of tool thermal propertyapplication to CBN hard turning. Int. J. Mach. Tools Mf., 2003, 43, 307-315.
4. Zhang, L. and Zheng, L. Prediction of cutting forces in milling of circular corner profiles. Int. J. Mach. Tools Mf., 2004, 44, 225-235.
5. Kumar, P., Joshi, S., and Kapoor, S. G. Modeling of cutting forces in a face-milling operation with selfpropelled round insert milling cutter. Int. J. Mach. Tools Mf., 2005, 20, 1-9.
6. Majumdar, P., Jayaramachandran, R., and Ganesan, S. Finite element analysis of temperature rise in metal cutting processes. J. Appl. Thermal Engng, 2005, 25, 2152-2168.
7. Lazoglu, I. and Altintas, Y. Prediction of tool and chip temperature in continuous and interrupted machining. Int. J. Mach. Tools Mf., 2002, 42, 1011-1022.
8. Ö zel, T. and Altan, T. Process simulation using finite element method prediction of cutting forces, tool stresses and temperatures in high speed flat end milling. Int. J. Mach. Tools Mf., 2000, 40, 713-738.
9. Wangt, Z. Y., Sahay, C., and Rajurkart, K. P. Tool temperatures and crack development in milling cutters. Int. J. Mach. Tools Mf., 1996, 36, 129-140.
10. Shet, C. and Deng, X. Finite element analysis of the orthogonal metal cutting process. J. Mater. Processing Technol., 2000, 105, 95-109.
11. McFeron, D. E. and Chao, B. T. Transient interface temperatures in plain peripheral milling. Trans. ASME, J. Engng Industry, 1958, 80, 321-329.
12. Liu, Y.-J., Zhang, J.-M., and Wang, S.-Q. Parameter estimation of cutting tool temperature nonlinear model using PSO algorithm. J. Zhejiang Univ. Sci., 2005, 6A(10), 1026-1029.
13. Li, H. Z., Li, X. P., and Chen, Q. A novel chatter stability criterion for the modeling and simulation of the dynamic milling process in the time domain. Int. J. Advd Mfg Technol., 2003, 22, 619-625.
14. Peigne, G., Paris, H., Brissaud, D., and Gouskove, A. Impact of the cutting dynamics of small radial immersion milling operations on machined surface roughness. Int. J. Mach. Tools Mf., 2004, 44, 1133-1142.
15. Toh, C. K. Static and dynamic cutting force analysis when high speed rough milling hardened steel. Mater. Des., 2004, 25, 41-50.
16. Joshi, P. C. Cutting tools, 1996 (A.H. Wheeler & Co. Ltd, New Delhi).
17. Ezugwu, E. O. High speed machining of aero-engine alloys. J. Bras. Soc. Mech. Sci. Engng, 2004, 26I, 1-11.
18. Kramer, B. M. On tools materials for high speed machining. Trans. ASME, J. Engng Industry, 1987, 109, 87-91.
19. Longbottom, J. M. and Lanham, J. D. Cutting temperature measurement while machining - a review. Int. J. Aircr. Engng Aerospace Technol., 2005, 77(2), 122-130.
20. O'Sullivan, D. and Cotterell, M. Temperature measurement in single point turning. J. Mater. Processing Technol., 2001, 118, 301-308.