Nanoindentation methods to measure viscoelastic properties of single cells using sharp, flat, and buckling tips inside ESEM

IEEE Transactions on Nanobioscience

Volumn 9, Issue 1, 2010, Pages 12-23

  Ahmad, Mohd Ridzuan ^a,b   Nakajima, Masahiro ^a   Kojima, Seiji ^a   Homma, Michio ^a   Fukuda, Toshio ^a  

^a NAGOYA UNIVERSITY   (Japan)

^b UNIVERSITI TEKNOLOGI MALAYSIA   (Malaysia)

Author keywords

Environmental SEM (ESEM); Nanomanipulation; Single cell analysis; Viscoelasticity; Yeast cells

Indexed keywords

CORRESPONDENCE PRINCIPLE; ENVIRONMENTAL SEM; FUNCTIONAL EQUATION; INDENTERS; LOADING HISTORY; NANOINDENTATION METHOD; NANOINDENTATION TESTS; NANOMANIPULATIONS; RAMP LOADING; SHARP INDENTER; SINGLE CELLS; SINGLECELL ANALYSIS; STEP LOADING; TIME-DEPENDENT; VISCOELASTIC PROPERTIES; YEAST CELL;

BUCKLING; ELASTICITY; GENE TRANSFER; MICROMANIPULATORS; NANOINDENTATION; UNLOADING; VISCOELASTICITY; VISCOSITY; YEAST;

CELLS;

ALGORITHM; ARTICLE; CULTURE TECHNIQUE; CYTOLOGY; ELASTICITY; INSTRUMENTATION; MECHANICAL STRESS; METHODOLOGY; MICROMANIPULATION; NANOTECHNOLOGY; SACCHAROMYCES CEREVISIAE; SCANNING ELECTRON MICROSCOPY; VISCOSITY;

ALGORITHMS; CELL CULTURE TECHNIQUES; ELASTICITY; MICROMANIPULATION; MICROSCOPY, ELECTRON, SCANNING; NANOTECHNOLOGY; SACCHAROMYCES CEREVISIAE; STRESS, MECHANICAL; VISCOSITY;

EID: 77950528703     PISSN: 15361241     EISSN: None     Source Type: Journal    
DOI: 10.1109/TNB.2009.2034849     Document Type: Article

References (37)

1. X. Li and B. Bhushan, "A review of nanoindentation continuous stiffness measurement technique and its applications," Mater. Charact., vol.48, pp. 11-36, 2002. (Pubitemid 34811629)
2. G. M. Pharr, W. C. Oliver, and F. R. Brotzen, "On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation," J. Mater. Res., vol.7, pp. 619-627, 2002.
3. J. R.M. Radok, "Viscoelastic stress analysis," Quart. Appl.Math., vol.15, pp. 198-202, 1957.
4. E. H. Lee and J. R. M. Radok, "The contact problems for viscoelastic bodies," J. Appl. Math., vol.27, pp. 438-444, 1960.
5. E. H. Lee, "Stress analysis in visco-elastic bodies," Quart. Appl. Math., vol.13, pp. 183-190, 1955.
6. L. Cheng, X. Xia,W. Yu, L. E. Scriven, andW.W. Gerberich, "Flat-punch indentation of viscoelastic material," J. Polym. Sci. B, Polym. Phys., vol.38, pp. 10-22, 2000. (Pubitemid 30519015)
7. H. Lu, B. Wang, J. Ma, G. Huang, and H. Viswanathan, "Measurement of creep compliance of solid polymers by nanoindentation," Mech. Time- Depend. Mater., vol.7, pp. 189-207, 2003.
8. L. Cheng, X. Xia, L. E. Scriven, and W. W. Gerberich, "Spherical-tip indentation of viscoelastic material," Mech. Mater., vol.37, pp. 213-226, 2005.
9. M. Vandamme and F.-J. Ulm, "Viscoelastic solutions for conical indentation," Int. J. Solids Struct., vol.43, pp. 3142-3165, 2006.
10. G. Huang and H. Lu, "Measurements of two independent viscoelastic functions by nanoindentation," Exp. Mech., vol.47, pp. 87-98, 2007. (Pubitemid 46454764)
11. E. G. Herbert, W. C. Oliver, A. Lumsdaine, and G. M. Pharr, "Measuring the constitutive behavior of viscoelastic solids in the time and frequency domain using flat punch nanoindentation," J. Mater. Res., vol.24, pp. 626- 637, 2009.
12. M. L. Oyen, "Analytical techniques for indentation of viscoelastic materials," Philos. Mag., vol.86, pp. 5625-5641, 2006.
13. C. A. Tweedie andK. J.V.Vliet, "Contact creep compliance of viscoelastic materials via nanoindentation," J. Mater. Res., vol.21, pp. 1576-1589, 2006.
14. C. Y. Zhang, Y. W. Zhang, K. Y. Zeng, and L. Shen, "Nanoindentation of polymers with a sharp indenter," J. Mater. Res., vol.20, pp. 1597-1605, 2005. (Pubitemid 41787045)
15. Y.-T. Cheng and C.-M. Cheng, "Relationships between initial unloading slope, contact depth, and mechanical properties for spherical indentation in linear viscoelastic solids," Mater. Sci. Eng. A, vol.409, pp. 93-99, 2005. (Pubitemid 41742292)
16. Y.-T. Cheng and C.-M. Cheng, "Relationship between contact stiffness, contact depth, and mechanical properties for indentation in linear viscoelastic solids using axisymmetric indenters," Struct. Control Health Monit., vol.13, pp. 561-569, 2006.
17. Y.-T. Cheng, C.-M. Cheng, and W. Ni, "Methods of obtaining instantaneous modulus of viscoelastic solids using displacement-controlled instrumented indentation with axisymmetric indenters of arbitrary smooth profiles," Mater. Sci. Eng. A, vol.423, pp. 2-7, 2006.
18. M. Sato, N. Ohshima, and R. M. Nerem, "Viscoelastic properties of cultured porcine aortic endothelial cells exposed to shear stress," J. Biomech., vol.29, pp. 461-467, 1996. (Pubitemid 26065727)
19. O. Thoumine and A. Ott, "Time scale dependent viscoelastic and contractile regimes in fibroblasts probed by microplate manipulation," J. Cell Sci., vol.110, pp. 2109-2116, 1997. (Pubitemid 27440434)
20. A. E. Smith, Z. Zhang, C. R. Thomas, K. E. Moxham, and A. P. J. Middelberg, "The mechanical properties of Saccharomyces cerevisiae," Proc. Nat. Acad. Sci. USA, vol.97, pp. 9871-9874, 2000.
21. A. E. Pelling, S. Sehati, E. B. Gralla, J. S. Valentine, and J. K. Gimzewski, "Local nanomechanical motion of the cell wall of saccharomyces cerevisiae," Science, vol.305, pp. 1147-1150, 2004. (Pubitemid 39100326)
22. T. S. Lanero, O. Cavalleri, S. Krol, R. Rolandi, and A. Gliozzi, "Mechanical properties of single living cells encapsulated in polyelectrolyte matrixes," J. Biotechnol., vol.124, pp. 723-731, 2006. (Pubitemid 44066593)
23. J. D. Stenson, C. R. Thomas, and P. Hartley, "Modelling the mechanical properties of yeast cells," Chem. Eng. Sci., vol.64, pp. 1892-1903, 2009.
24. R. S. Lakes, "Viscoelastic measurement techniques," Rev. Sci. Instrum., vol.75, pp. 797-809, 2004.
25. E. H. Lee and J. R. M. Radok, "The contact problem for viscoelastic bodies," J. Appl. Mech., vol.27, pp. 438-444, 1960.
26. I. N. Sneddon, "The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile," Int. J. Eng. Sci., vol.3, pp. 47-57, 1965.
27. H. Lu, B. Wang, J. Ma, G. Huang, and H. Viswanathan, "Measurement of creep compliance of solid polymers by nanoindentation," Mech. Time- Depend. Mater., vol.7, pp. 189-207, 2003.
28. J. E. Sader, "Parallel beam approximation for v-shaped atomic force, microscope cantilevers," Rev. Sci. Instrum., vol.66, pp. 4583-4587, 1995.
29. E. Liu, B. Blanpain, and J. P. Celis, "Calibration procedures for frictional measurements with a lateral force microscope," Wear, vol.192, pp. 141- 150, 1996. (Pubitemid 126402154)
30. C. T. Gibson, G. S. Watson, and S. Myhra, "Determination of the spring constants of probes for forcemicroscopy/spectroscopy," Nanotechnology, vol.7, pp. 259-262, 1996. (Pubitemid 126558360)
31. S. P. Timoshenko and J. M. Gere, Theory of Elastic Stability, 2nd ed. New York: McGraw Hill, 1961.
32. W. C. O'Mara, R. B. Herring, and L. P. Hunt, Handbook of Semiconductor Silicon Technology. Park Ridge, NJ: Noyes, 1990.
33. M. R. Ahmad, M. Nakajima, S. Kojima, M. Homma, and T. Fukuda, "Mechanical properties characterization of individual yeast cells using environmental-sem nanomanipulation system," in Proc. IEEE/RSJ Int. Conf. Intell. Robot. Syst. (IROS 2007), pp. 596-601.
34. M. Mancini and M. Moresi, "Rheological behaviour of bakers yeast suspension," J. Food Eng., vol.44, pp. 225-231, 2000. (Pubitemid 30585558)
35. S. L. Presti andM.Moresi, "Development of a novel integrated membrane process for citric acid and production by yarrowia lipolytica," in Proc. 4th Italian Conf. Chem. Process Eng. (IChea P4), Florence, Italy, 1999, pp. 411-414.
36. R. A. Speer, T. D. Durance, M. A. Tung, and J. Thou, "Colloidal properties of flocculent and nonflocculent brewing yeast suspensions," Biotechnol. Prog., vol.9, pp. 267-272, 1993.
37. I. M. Tolic-Nørrelykke, E.-L. Munteanu, G. Thon, L. Oddershede, and K. Berg-Sørensen, "Anomalous diffusion in living yeast cells," Phys. Rev. Lett., vol.93, pp. 1-4, 2004.