Lubricated compression and X-ray microtomography to analyse the rheology of a fibre-reinforced mortar

Rheologica Acta

Volumn 49, Issue 3, 2010, Pages 221-235

  Chalencon, F ^a,c   Orgeas L ^a   Dumont, P J J ^b   Foray, G ^c   Cavaille J Y ^c   Maire, E ^c   Rolland du Roscoat, S ^a,d  

^a UNIV GRENOBLE ALPES   (France)

^b Laboratory of Pulp and Paper Industry LGP2 UMR CNRS 5518   (France)

^c CNRS   (France)

^d EUROPEAN SYNCHROTRON RADIATION FACILITY   (France)

Author keywords

Fibre suspension; Granular system; Lubricated compression; X ray microtomography

Indexed keywords

EID: 77950517839     PISSN: 00354511     EISSN: None     Source Type: Journal    
DOI: 10.1007/s00397-009-0393-5     Document Type: Article

References (46)

1. Advani SG, Tucker CL (1987) The use of tensors to describe and predict fiber orientation in short fiber composites. J Rheol 3(8): 751-784.
2. Atahan H, Carlos J et al (2008) The morphology of entrained air voids in hardened cement paste generated with different anionic surfactants. Cem Concr Compos 30: 566-575.
3. Banfill P, Starrs G, Derruau G, McCarter W, Chrisp T (2006) Rheology of low carbon fibre content reinforced cement mortar. Cem Concr Compos 28: 773-780.
4. Baruchel J, Buffiere J, Cloetens P, Di Michiel M, Ferrie E, Ludwig W, Maire E, Salvo L (2006) Advances in synchrotron radiation microtomography. Scr Mater 55: 41-46.
5. Bentz D, Mizell S, Satterfield S, Devaney J, George W, Ketcham P, Graham J, Quenard D, Vallee F, Sallee H, Boller E, Baruchel J (2002) The visible cement data set. J Res Natl Inst Stand Technol 107: 137-148.
6. Cheng B, Liu J (2005) Contribution of hybrid fibers on the properties of the high-strength lightweight concrete having good workability. Cem Concr Res 35: 913-917.
7. Coussot P (2005) Rheometry of pastes, suspensions and granular materials: applications in industry and environment. Wiley, New York.
8. Djalili-Moghaddam M, Toll S (2005) A model for short-range interactions in fibre suspensions. J Non-Newton Fluid Mech 132: 73-83.
9. Doi M, Edwards SF (1978) Dynamics of rod-like macromolecules in concentrated solution. J. Chem Soc Faraday Trans II 74(1): 560-570.
10. Dumont P, Orgéas L, Le Corre S, Favier D (2003) Anisotropic viscous behaviour of sheet molding compounds (SMC) during compression molding. Int J Plast 19(4): 625-646.
11. Dumont P, Vassal J-P, Orgéas L, Michaud V, Favier D, Månson J-E (2007) Processing, characterization and rheology of transparent concentrated fibre bundle suspensions. Rheol Acta 46: 639-651.
12. Dumont PJJ, Le Corre S, Orgéas L, Favier D (2009) A numerical analysis of the evolution of bundle orientation in concentrated fibre-bundle suspensions. J Non-Newton Fluid Mech 160: 76-92.
13. Dupret F, Couniot A, Mal O, Vanderschuren L, Verhoyen O (1999) Modelling and simulation of injection molding. Rheology series. Elsevier, Amsterdam, pp 939-1010.
14. El-Dieb AS (2009) Mechanical, durability and microstructural characteristics of ultra-high-strength self-compacting concrete incorporating steel fibers. J Mater Design 30: 4286-4292.
15. Estellé P, Lanos C, Perrot A, Servais C (2006) Slipping zone location in squeeze flow. Rheol Acta 45: 444-448.
16. Férec J, Ausias G, Heuzey MC, Carreau PJ (2009) Modeling fiber interactions in semiconcentrated fiber suspension. J Rheol 53: 49-72.
17. Ferrara L, Park Y-D, Shah SP (2007) A method for mix-design of fiber-reinforced self-compacting concrete. Cem Concr Res 37: 957-971.
18. Ferrara L, Park Y-D, Shah SP (2008) Correlation among fresh state behavior, fiber dispersion, and toughness properties of sfrcs. J Mater Civ Eng 20(7): 493-501.
19. Grünewald S, Walraven JC (2001) Parameter study on the influence of steel fibers and coarse aggregate content on the fresh properties of self-compacting concrete. Cem Concr Res 31: 1793-1798.
20. Hand GL (1961) A theory of dilute suspensions. Arch Ration Mech Anal 7: 81-86.
21. Jeffery GB (1922) The motion of ellipsoidal particles immersed in a viscous fluid. Proc R Soc London A 102: 161-179.
22. Knapen E, Gemert DV (2009) Cement hydration and microstrucure formation in the presence of water soluble polymers. Cem Concr Res 39: 6-13.
23. Kuder KG, Ozyurt N, Mu EB, Shah SP (2007) Rheology of fiber-reinforced cementitious materials. Cem Concr Res 37: 191-199.
24. Le TH, Dumont PJJ, Orgéas L, Favier D, Salvo L, Boller E (2008) X-ray phase contrast microtomography for the analysis of the fibrous microstructure of SMC composites. Compos Part A 39: 91-103.
25. Le Corre S, Orgéas L, Favier D, Tourabi A, Maazouz A, Venet C (2002) Shear and compression behaviour of sheet molding compounds. Compos Sci Technol 62(4): 571-577.
26. Le Corre S, Caillerie D, Orgéas L, Favier D (2004) Behavior of a net of fibers linked by viscous interactions: theory and mechanical properties. J Mech Phys Solids 52: 395-421.
27. Le Corre S, Dumont P, Orgéas L, Favier D (2005) Rheology of highly concentrated planar fiber supensions. J Rheol 49: 1029-1058.
28. Limodin N, Salvo L, Boller E, Suéry M, Felberbaum M, Gailliègue S, Madi K (2009) In situ and real-time 3-D microtomography investigation of dendritic solidification in an Al 10 wt.% Cu alloy. Acta Mater 57: 2300-2310.
29. Lipscomb GG, Denn MM, Hur DU, Boger DV (1988) The flow of fiber suspensions in complex geometries. J Non-Newton Fluid Mech 26: 297-325.
30. Liu X-J, Yu Z-W, Jiang L-Z (2008) Long term behavior of self-compacting reinforced concrete beams. J Cent South Univ Technol 15: 423-428.
31. Mackaplow MB, Shaqfeh ESG (1996) A numerical study of the rheological properties of suspensions of rigid, non-brownian fibres. J. Fluid Mech 329: 155-186.
32. Maire E, Colombo P, Adrien J, Babout L, Biasetto L (2007) Characterization of he morphology of cellular ceramics by 3D image processing of X-ray tomography. J Eur Ceram Soc 27: 1973-1981.
33. Orgéas L, Dumont PJJ, Le TH, Favier D (2008) Lubricated compression of BMC, a concentrated and fibre reinforced granular polymer suspension. Rheol Acta 47: 677-688.
34. Ranganathan S, Advani SG (1991) Fiber-fiber interactions in homogeneous flows of non-dilute suspensions. J Rheol 35: 1499-1522.
35. Roussel N, Coussot P (2005) "Fifty-cent rheometer" for yield stress measurements: from slump to spreading flow. J Rheol 49(3): 705-718.
36. Sahmaran M, Yaman IO (2007) Hybrid fiber reinforced self-compacting concrete with a high-volume coarse fly ash. Constr Build Mater 21: 150-156.
37. Sepehr M, Ausias G, Carreau PJ (2004) Rheological properties of short fiber filled polypropylene in transient shear flow. J Non-Newton Fluid Mech 123: 19-32.
38. Servais C, Månson J-AE, Toll S (1999a) Fiber-fiber interaction in concentrated suspensions: disperse fibers. J Rheol 43(4): 991-1004.
39. Shaqfeh ESG, Fredrickson G (1990) The hydrodynamic stress in a suspension of rods. Phys Fluids 2(1): 7-24.
40. Silva D, Monteiero P (2005) Hydration evolution of c3s-eva composites analysed by soft X ray microscopy. Cem Concr Res 35(2): 351-357.
41. Takashima H, Miyagai K, Hashida T, Li VC (2003) Ia design approach for the mechanical properties of polypropylene discontinuous fiber reinforced cementitious composites by extrusion molding. Eng Fract Mech 70: 853-870.
42. Terzi S, Salvo L, Suéry M, Boller E (2009 In situ X-ray microtomography characterization of the entrapped liquid formed during partial remelting of a cold-rolled Al8 wt.% Cu alloy. Scr Mater 60(8): 671-674.
43. Thevenin G, Pera J (1999) Interactions between lead and different binders. Cem Concr Res 29: 1605-1610.
44. Toll S (1993) Note: on the tube model for fiber suspensions. J Rheol 37(1): 123-125.
45. Toll S, Månson J-AE (1994) Dynamics of a planar concentrated suspension with non-hydrodynamic interaction. J Rheol 38(4): 985-997.
46. Vassal J-P, Orgéas L, Favier D, Auriault J-L, Corre SL (2008b) Upscaling the diffusion equations in particulate media made of highly conductive particles. II. Application to fibrous materials. Phys Rev E 77: 011303.