Characterization of structural changes in lignin during continuous batch kraft cooking of Eucalyptus globulus

BioResources

Volumn 4, Issue 1, 2009, Pages 172-193

  Rutkowska, Ewa W ^a   Wollboldt, Petra ^a   Zuckerstätter, Gerhard ^a   Weber, Hedda K ^a   Sixta, Herbert ^b  

^a KOMPETENZZENTRUM HOLZ GMBH   (Austria)

^b Department of Forest Products Technology ^*  (Finland)

Author keywords

Continuous batch cooking; Dissolved wood lignin; Eucalyptus globulus; Mild acidolysis lignin; Residual lignin

Indexed keywords

CONTINUOUS BATCH COOKING; EUCALYPTUS GLOBULUS; MILD ACIDOLYSIS LIGNIN; RESIDUAL LIGNINS; WOOD LIGNIN;

CARBOHYDRATES; DELIGNIFICATION; DISSOLUTION; LIGNIN; PHENOLS; PULP; WOOD;

PULP COOKING;

CARBOHYDRATES; DELIGNIFICATION; DISSOLVING; EUCALYPTUS GLOBULUS; LIGNINS; PHENOLS; PULPS; WOOD;

EUCALYPTUS; EUCALYPTUS GLOBULUS;

EID: 77950491644     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: None     Document Type: Article

References (56)

1. Ämmälahti, E., Brunow, G., Bardet, M., Robert, D., and Kilpeläinen, I. (1998). "Identification of side-chain structures in a poplar lignin using three-dimensional HMQC-HOHAHA NMR spectroscopy," Journal of Agricultural and Food Chemistry 46(12), 5113-5117.
2. Argyropoulos, D. S., Sun, Y., and Palus, E. (2000). "A novel method for isolating residual kraft lignin," Sixth European Workshop on Lignocellulosics and Pulp 23-27.
3. Argyropoulos, D. S., Sun, Y., and Palus, E. (2002). "Isolation of residual kraft lignin in high yield and purity," Journal of Pulp and Paper Science 28(2), 50-54.
4. Axegard, P., and Backlund, B. (2003). "Ecocyclic Pulp Mill - "KAM". Final report, 1996-2002." STFI, Swedish Pulp and Paper Research Institute, Stockholm, Sweden.
5. Björkman, A. (1956). "Studies on finely divided wood. Part 1. Extractions of lignin with neutral solvents," Svensk Papperstidning 59, 477-485.
6. Capanema, E. A., Balakshin, M. Y., and Chen, C.-L. (2004). "An improved procedure for isolation of residual lignins from hardwood kraft pulps," Holzforschung 58(5), 464-472.
7. Chang, H.-M., Cowling, E. B., Brown, W., Adler, E., and Miksche, G. (1975). "Comparative studies on cellulolytic enzyme lignin and milled wood lignin of sweetgum and spruce," Holzforschung 29(5), 153-159.
8. del Rio, J. C., Gutierrez, A., Hernando, M., Landin, P., Romero, J., and Martinez, A. T. (2005). "Determining the influence of eucalypt lignin composition in paper pulp yield using Py-GC/MS," Journal of Analytical and Applied Pyrolysis 74(1-2), 110-115.
9. Evtuguin, D. V., Pascoal Neto, C., Silva, A. M. S., Domingues, M. R. M., Amado, F. M. L., Robert, D., and Faix, O. (2001). "Comprehensive study on the chemical structure of dioxane lignin from plantation Eucalyptus globulus wood," J. Agric. Food Chem. 49, 4252-4261.
10. Fasching, M., Schröder, P., Wollboldt, R. P., Weber, H. K., and Sixta, H. (2008). "A new and facile method for isolation of lignin from wood based on complete wood dissolution," Holzforschung 62(1), 15-23.
11. Gellerstedt, G., Pranda, J., and Lindfors, E. L. (1994). "Structural and molecular properties of residual birch kraft lignins," Journal of Wood Chemistry and Technology 14(4), 467-82.
12. Genco, J. M., and Busayasakul, N. (1990). "Hemicelluloses retention during kraft pulping," Tappi J. 73(4), 223-233.
13. Gierer, J. (1985). "Chemistry of delignification. Part 1: General concept and reactions during pulping," Wood Science and Technology 19(4), 289-312.
14. Guerra, A., Filpponen, I., Lucia, L. A., and Argyropoulos, D. S. (2006a). "Comparative evaluation of three lignin isolation protocols for various wood species," Journal of Agricultural and Food Chemistry 54(26), 9696-9705.
15. Guerra, A., Filpponen, I., Lucia, L. A., Saquing, C., Baumberger, S., and Argyropoulos, D. S. (2006b). "Toward a better understanding of the lignin isolation process from wood," Journal of Agricultural and Food Chemistry 54(16), 5939-5947.
16. Guerra, A., Gaspar, A. R., Contreras, S., Lucia, L. A., Crestini, C., and Argyropoulos, D. S. (2007). "On the propensity of lignin to associate: A size exclusion chromatography study with lignin derivatives isolated from different plant species," Phytochemistry (Elsevier), 68(20), 2570-2583.
17. Guerra, A., Lucia, L. A., and Argyropoulos, D. S. (2008a). "Isolation and characterization of lignins from Eucalyptus grandis Hill ex Maiden and Eucalyptus globulus Labill. by enzymatic mild acidolysis (EMAL)," Holzforschung 62(1), 24-30.
18. Guerra, A., Norambuena, M., Freer, J., and Argyropoulos, D. S. (2008b). "Determination of arylglycerol-b-aryl ether linkages in enzymatic mild acidolysis lignins (EMAL): Comparison of DFRC/31P NMR with thioacidolysis," Journal of Natural Products 71(5), 836-841.
19. Ibarra, D., del Rio, J. C., Gutierrez, A., Rodriguez, I. M., Romero, J., Martinez, M. J., and Martinez, A. T. (2004). "Isolation of high-purity residual lignins from eucalypt paper pulps by cellulase and proteinase treatments followed by solvent extraction," Enzyme and Microbial Technology 35(2-3), 173-181.
20. Ibarra, D., del Rio, J. C., Gutierrez, A., Rodriguez, I. M., Romero, J., Martinez, M. J., and Martinez, A. T. (2005). "Chemical characterization of residual lignins from eucalypt paper pulps," Journal of Analytical and Applied Pyrolysis 74(1-2), 116-122.
21. Ikeda, T., Holtman, K., Kadla, J. F., Chang, H.-M., and Jameel, H. (2002). "Studies on the effect of ball milling on lignin structure using a modified DFRC method," Journal of Agricultural and Food Chemistry 50(1), 129-135.
22. Jääskeläinen, A. S., Sun, Y., Argyropoulos, D. S., Tamminen, T., and Hortling, B. (2003). "The effect of isolation method on the chemical structure of residual lignin," Wood Science and Technology 37(2), 91-102.
23. Jiang, Z. H., and Argyropoulos, D. S. (1999). "Isolation and characterization of residual lignins in kraft pulps," Journal of Pulp and Paper Science 25(1), 25-29.
24. Kilpeläinen, I., Sipilä, J., Brunow, G., Lundquist, K., and Ede, R. M. (1994). "Application of two-dimensional NMR spectroscopy to wood lignin structure determination and identification of some minor structural units of hard- and softwood lignins," Journal of Agricultural and Food Chemistry 42(12), 2790-4.
25. Koch, G., and Kleist, G. (2001). "Application of scanning UV microspectrophotometry to localise lignins and phenolic extractives in plant cell walls," Holzforschung 55(6), 563-567.
26. Koch, G., Rose, B., Patt, R., and Kordsachia, O. (2003). "Topochemical investigations on delignification of Picea abies [L.] Karst. during alkaline sulfite (ASA) and bisulfite pulping by scanning UV microspectrophotometry," Holzforschung 57(6), 611-618.
27. Kondo, R., and Sarkanen, K. V. (1984). "Kinetics of lignin and hemicellulose dissolution during the initial stage of alkaline pulping," Holzforschung, 38(1), 31-36.
28. Li, S., and Lundquist, K. (2000). "Cleavage of arylglycerol ß-aryl ethers under neutral and acid conditions," Nordic Pulp and Paper Research Journal 15(4), 292-299.
29. Lin, S. Y., and Dence, C. W. (1992). "Fourier transform infrared spectroscopy," Methods in Lignin Chemistry, S. Y. Lin and C. W. Dence (eds.), Springer-Verlag, Berlin Heidelberg, 96.
30. Lu, F., and Ralph, J. (2003). "Non-degraditive dissolution and acetylation of ball-milled plant cell walls: High-resolution solution-state NMR," The Plant Journal 35, 535-544.
31. Lundquist, K. (1992). "Acetylation." Methods in Lignin Chemistry, S. Y. Lin and C. W. Dence (eds.), Springer-Verlag, Berlin, 243.
32. Motomura, H., Bae, S.-H., and Morita, Z. (1998). "Dissociation of hydroxyl groups of cellulose at low ionic strengths," Dyes and Pigments 39(4), 243-258.
33. Patt, R., Kordsachia, O., and Fehr, J. (2006). "European hardwoods versus Eucalyptus globulus as a raw material for pulping," Wood Science and Technology 40(1), 39-48.
34. Pinto, P. C., Evtuguin, D. V., and Neto, C. P. "Influence of the chemical structure of hardwoods on their behaviour during kraft pulping and ECF bleaching." Eighth European Workshop on Lignocellulosics and Pulp, 93-96.
35. Pinto, P. C., Evtuguin, D. V., and Pascoal Neto, C. (2005). "Effect of structural features of wood biopolymers on hardwood pulping and bleaching performance," Industrial & Engineering Chemistry Research 44(26), 9777-9784.
36. Pinto, P. C., Evtuguin, D. V., Pascoal Neto, C., and Silvestre, A. J. D. (2002a). "Behavior of Eucalyptus globulus lignin during kraft pulping. I. Analysis by chemical degradation methods," Journal of Wood Chemistry and Technology 22(2-3), 93-108.
37. Pinto, P. C., Evtuguin, D. V., Pascoal Neto, C., Silvestre, A. J. D., and Amado, F. M. L. (2002b). "Behavior of Eucalyptus globulus lignin during kraft pulping. II. Analysis by NMR, ESI/MS, and GPC," Journal of Wood Chemistry and Technology 22(2-3), 109-125.
38. Rencoret, J., Marques, G., Gutierrez, A., Ibarra, D., Li, J., Gellerstedt, G., Santos, J. I., Jimenez-Barbero, J., Martinez, A. T., and del Rio, J. C. (2008). "Structural characterization of milled wood lignins from different eucalypt species," Holzforschung 62(5), 514-526.
39. Roeder, T., Koch, G., and Sixta, H. (2004). "Application of confocal Raman spectroscopy for the topochemical distribution of lignin and cellulose in plant cell walls of beech wood (Fagus sylvatica L.) compared to UV microspectrophotometry," Holzforschung, 58(5), 480-482.
40. Santiago, A. S., and Pascoal Neto, C. (2007). "Assessment of potential approaches to improve Eucalyptus globulus kraft pulping yield," Journal of Chemical Technology and Biotechnology 82(5), 424-430.
41. Santiago, A. S., Pascoal Neto, C., and Vilela, C. (2008). "Impact of effective alkali and sulfide profiling on Eucalyptus globulus kraft pulping. Selectivity of the impregnation phase and its effect on final pulping results," Journal of Chemical Technology and Biotechnology 83(3), 242-251.
42. Santos, A., Rodriguez, F., Gilarranz, M. A., Moreno, D., and Garcia-Ochoa, F. (1997). "Kinetic modeling of kraft delignification of Eucalyptus globulus," Industrial & Engineering Chemistry Research 36(10), 4114-4125.
43. Sixta, H. (2006). "Introduction [to industrial pulping]," Handbook of Pulp, 1, 3-19.
44. Sixta, H. (2007). "Comparative evaluation of CBC cooking of different hardwood species." unpublished results, Lenzing AG, Lenzing.
45. Sixta, H., Potthast, A., and Krotschek, A. W. (2006). "Chemical pulping processes," Handbook of Pulp, 1, 109-509.
46. Sixta, H., Promberger, A., Borgards, A., and Moeslinger, R. (2007). "Kraft process for production of cellulose pulp," (Lenzing Aktiengesellschaft, Austria). Application: WO 2007128024 A1, 50pp.
47. Sixta, H., and Rutkowska, E. W. (2007). "Comprehensive kinetic study on kraft pulping of Eucalyptus globulus. Part I," Papel, 68(2), 54-67.
48. Sixta, H., Schelosky, N., Milacher, W., Baldinger, T., and Röder, T. "Characterization of alkali-soluble pulp fractions by chromatography." 11th ISWPC, Nice, France, 655-658.
49. TAPPI. (1991). UM 250. "Acid-soluble lignin in wood and pulp." TAPPI Useful methods 1991.
50. TAPPI. (1998). T 222. Om-98, "Acid-insoluble lignin in wood and pulp."
51. Teder, A., and Olm, L. (1981). "Extended delignification by combination of modified kraft pulping and oxygen delignification," Pap. Puu 63(4a), 315-326.
52. Vieböck, F., and Schwappach, A. (1930). "Eine neue Methode zur massanalytischen Bestimmung der Methoxyl- und Ethoxylgruppen," Chemische Berichte 63, 2818-2123.
53. Wilder, H. D., and Daleski Jr., E. J. (1965). "Delignification rate studies. Part II of a series on kraft pulping kinetics," Tappi 48(5), 293-297.
54. Wizani, W., Krotscheck, A., Wojciech, J., and Bito, R. "CBC - Continuous batch cooking - The revolution in kraft cooking." Pulping Process and Product Quality Conference, Boston, MA, USA, 1-7.
55. Wu, S., and Argyropoulos, D. S. (2003). "An improved method for isolating lignin in high yield and purity," Journal of Pulp and Paper Science 29(7), 235-240.
56. Vuorinen, T., and Alen, R. (1999). "Carbohydrates." Analytical Methods in Wood Chemistry, Pulping and Papermaking, E. Sjöström and R. Alen, eds., Springer, Heidelberg, 38-75.