Influence of adsorbed and dissolved carboxymethyl cellulose on fibre suspension dispersing, dewaterability, and fines retention

BioResources

Volumn 4, Issue 1, 2009, Pages 321-340

  Liimatainen, Henrikki ^a   Haavisto, Sanna ^b   Haapala, Antti ^a   Niinimäki, Jouko ^a  

^a UNIVERSITY OF OULU   (Finland)

^b VTT TECHNICAL RESEARCH CENTRE OF FINLAND   (Finland)

Author keywords

Adsorption; Carboxymethyl cellulose; Deflocculation; Dispersing; Fibre; Flocculation; Pulp

Indexed keywords

CARBOXY-METHYL CELLULOSE; CONTACT POINTS; DEFLOCCULATION; DETRIMENTAL EFFECTS; DEWATERABILITY; DISPERSING; FIBRE; FIBRE FRICTION; FIBRE SURFACES; FILTER CAKES; FINES RETENTION; LIQUID PHASE; MICRO-FIBRILS; MICROFIBRILLAR; PULP FIBRE SUSPENSIONS; PULP SUSPENSION;

ADSORPTION; CELLULOSE; DISSOLUTION; ELECTROLYTES; FLOCCULATION; FRICTION; LIQUIDS; SUSPENSIONS (FLUIDS);

FIBERS;

ADSORPTION; CARBOXYMETHYL CELLULOSE; CELLULOSE; DEFLOCCULATION; DISPERSING; DISPERSIONS; DISSOLVING; ELECTROLYTES; FIBERS; FLOCCULATION; FRICTION; LIQUIDS; PULPS;

EID: 77950469115     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: None     Document Type: Article

References (40)

1. Andersson, S. R., Ringnér, J., and Rasmuson, A. (1999). "The network strength of non-flocculated fibre suspensions," Nord. Pulp Pap. Res. J. 14(1), 61-70.
2. Beghello, L. (1998). "Some factors that influence fiber flocculation," Nord. Pulp Pap. Res. J. 13(4), 274-279.
3. Beghello, L., and Lindström, T. (1998). "The influence of carboxymethylation on the fiber flocculation process," Nord. Pulp Pap. Res. J. 13(4), 269-273.
4. Bennington, C. P. J., Kerekes, R. J., and Grace, J. R. (1990). "The yield stress of pulp suspensions," Can. J. Chem. Eng. 68(10), 748-757.
5. Blomstedt, M. (2007). Modification of Cellulosic Fibers by Carboxymethyl Cellulose - Effects on Fiber and Sheet Properties, Ph.D. Thesis, Helsinki University of Technology, Espoo, Finland, 75.
6. Bowden, F. P., and Tabor, D. (1967). Friction and lubrication, Methuen, London, 150.
7. Carman, P.C. (1937). "Fluid flow through granular beds," Trans. Inst. Chem. Eng. 15, 150-166.
8. de Roos, A.J. (1958). "Stabilization of fiber suspensions," Tappi 41(7), 354-358.
9. Fardim, P., Holmbom, B., Ivaska, A., Karhu, J., Mortha, G., and Laine, J (2002). "Critical comparison and validation of methods for determination of anionic groups in pulp fibres," Nord. Pulp Pap. Res. J. 17(3), 346-351.
10. Farnood, R. R., Loewen, S. R., and Dodson, C. T. J. (1994). "Estimation of intra-floc forces," Appita 47(5), 391-396.
11. Giri, M., Simonsen, J., and Rochefort, W. E. (2000). "Dispersion of pulp slurries using carboxymethylcellulose," Tappi J 83(10), 58.
12. Griebel, T., Kuliche, W. M., and Kniewske, R. (1992). "The predictability of sodium carboxymethylcellulose viscosity yields," Inst. Tech. Makromol. Chem. 46(5), 154.
13. Hakkila, P. (2000). "Structure and properties of wood and woody biomass," In: Forest Resources and Sustainable Management, Fapet Oy, Helsinki, 116-185.
14. Hensley, J. W., and Inks, C. G. (1959). "Adsorption of labeled sodium carboxymethyl cellulose by textile fibers," Tex. Res. J. 29(6), 505-513.
15. Horvath, A. E., and Lindström, T. (2007). "The influence of colloidal interactions on fiber network strength," J. Colloid Interface Sci. 309(2), 511-517.
16. Jokinen, H. M., Niinimäki, J., and Ämmälä, A. (2006). "The effect of anionic polymer additive on fractionation of paper pulp," Appita 59(6), 459-464.
17. Joutjärvi, S. (2004). Effect of Carboxymethyl Cellulose on Pulp Dispersing and Dewatering, Licentiate Thesis, University of Jyväskylä, Finland, 63.
18. Karjalainen, M. (2004). Measurement of Fibre Suspension Network Strength, M.Sc. Thesis, University of Oulu, Finland, 106.
19. th Fundamental research symposium, September, Oxford, UK, 591-604.
20. Kerekes, R.J., Soszynsky, R.M., and Tam Doo, P.A. (1985). "Papermaking raw materials," In: Transactions of Eighth Fundamental Research Symposium, Oxford, 265-310.
21. Kozeny, J. (1927). "Uber kapillare Leitung der Wasser im Boden," Sitz.ber Akad. Wiss. 136, 271-306.
22. Laine, J. (2007). "Fibre surface modification by different polyelectrolytes - A possibility to obtain new paper properties," PulPaper 2007 Conference, June 5-7, Helsinki.
23. Laine, J., Lindström, T., Nordmark, G.G., and Risinger, G. (2000). "Studies on topochemical modification of cellulosic fibres. Part 1.," Nord. Pulp Pap. Res. J. 15(5), 520-526.
24. Laine, J., Lindström, T., Nordmark, G.G., and Risinger, G. (2002) "Studies on topochemical modification of cellulosic fibres. Part 2.," Nord. Pulp Pap. Res. J. 17(1), 50-56.
25. Lee, P. F. W, and Lindström, T. (1989). "Effects of high molecular mass anionic polymers on paper sheet formation," Nord. Pulp Pap. Res. J. 4(2), 61-70.
26. Liimatainen, H., Kokko, S., Rousu, P., and Niinimäki, J. (2006). "Effect of PCC filler on dewatering of fiber suspension", Tappi J. 5(11), 11-16.
27. th World Filtration Congress, April 14-18, Leipzig, 61-65.
28. th International Symposium on Wood and Pulping Chemistry, June 7-10, Yokohama, 432-439.
29. Paul, T., Duffy, G., and Chen, D. (2001). "New insights into the flow of pulp suspension," Solutions for People, Processes and Paper 1, 94.
30. Rantanen, M., Molarius, S., Pikkarainen, S., Knuutinen, J., and Pakarinen, P. (2006). "Effect of carboxymethyl cellulose on pulp dispersing," Pap. Puu 88(6), 346-350.
31. Wahren, D., and Thalen, N. (1964). "Shear modulus and ultimate shear strength of some paper pulp fibre networks," Svensk Papperstidn. 67(13), 259-264.
32. Wakeman, R. J., and Tarleton, E. S. (1999). Filtration-Equipment Selection Modeling and Process Simulation, Elsevier Advanced Technology, UK, 55-96.
33. Wang, J., and Somasundaran, P. (2005). "Adsorption and conformation of carboxymethyl cellulose at solid-liquid interfaces using spectroscopic, AFM and allied techniques," Colloids Surf. A 291(1), 75-83.
34. Wasser, R. B. (1978). "Formation aids. An evaluation of chemical additives for dispersing long-fibered pulps," Tappi 61(11), 115-118.
35. Watanabe, M., Gondo, T., and Kitao, O. (2004). "Advanced wet-end system with carboxymethyl-cellulose," Tappi J. 3(5), 15-19.
36. Wikström, T., and Rasmuson, A. (1998). "Yield stress of pulp suspensions. The influence of fibre properties and processing conditions," Nord. Pulp Pap. Res. J. 13(3), 243-246.
37. Wågberg, L., and Björklund, M. (1993). "Adsorption of cationic potato starch on cellulosic fibres," Nord. Pulp Pap. Res. J. 8(4), 399-404.
38. Yan, H. T., Lindström, T., and Christiernin, M. (2006). "Some ways to decrease fibre suspension flocculation and improve sheet formation," Nord. Pulp Pap. Res. J. 21(1), 36-43.
39. Zauscher, S., and Klingenberg, D.J. (2001). "Friction between cellulose surfaces measured with colloidal probe microscope," Colloids Surf. A 178(1), 213-229.
40. Zhao, R.H., and Kerekes, R.J. (1993). "The effect of suspending liquid viscosity on fiber flocculation," Tappi J. 76(2), 183-188.