Recycled carbon fibre reinforced polymer composite for electromagnetic interference shielding

Composites Part A: Applied Science and Manufacturing

Volumn 41, Issue 6, 2010, Pages 693-702

  Wong, K H ^a   Pickering, S J ^a   Rudd, C D ^a  

^a UNIVERSITY OF NOTTINGHAM   (United Kingdom)

Author keywords

A. Carbon fibres; A. Recycling; A. Thermosetting resin; B. Electrical properties

Indexed keywords

A. CARBON FIBRES; AREAL DENSITIES; CARBON FIBRE REINFORCED POLYMER; CARBON FIBRES; ELECTRICAL PROPERTY; ELECTROMAGNETIC INTERFERENCE SHIELDING; ELECTROMAGNETIC INTERFERENCE SHIELDING MATERIALS; FIBRE LENGTH; FIBRE REINFORCED POLYMERS; FLUIDISED BED PROCESS; NON-WOVEN; RECYCLED FIBRE; SHIELDING EFFECTIVENESS; SHIELDING PERFORMANCE; THERMOSETTING RESINS; TWO LAYERS;

CARBON FIBERS; CARBON NANOFIBERS; ELECTRIC PROPERTIES; ELECTROMAGNETIC COMPATIBILITY; ELECTROMAGNETIC PULSE; ELECTROMAGNETIC WAVE INTERFERENCE; FIBER REINFORCED PLASTICS; FIBERS; FLUIDIZATION; FLUIDIZED BEDS; MAGNETIC SHIELDING; RADIATION PROTECTION; RECYCLING; REINFORCED PLASTICS; RESINS; THERMOSETS;

ELECTROMAGNETIC SHIELDING;

EID: 77950021765     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesa.2010.01.012     Document Type: Article

References (43)

1. Petterson J., and Nilsson P. Recycling of SMC and BMC in standard process equipment. J Thermoplast Compos Mater 7 1 (1994) 56-63
2. Schinner G., Brandt J., and Richter H. Recycling carbon-fiber-reinforced thermoplastic composites. J Thermoplast Compos Mater 9 3 (1996) 239-245
3. Fromonteil C., Bardelle P., and Cansell F. Hydrolysis and oxidation of an epoxy resin in sub- and supercritical water. Ind Eng Chem Res 39 4 (2000) 922-925
4. Hyde J.R., Lester E., Kingman S., Pickering S., and Wong K.H. Supercritical propanol, a possible route to composite carbon fibre recovery: a viability study. Composites A 37 11 (2006) 2171-2175
5. Diem W. Still too exotic. Ward's Auto World 40 11 (2004) 23
6. Anonymous. Aircraft demand prompts Toray to boost carbon fibre capacity. Reinf Plast 51 9 (2007) 7
7. Nowaczek W. Polyester moulding compounds made from recycled thermosetting resins. Polym Recycl 5 2 (2000) 91-97
8. Perrin D., Guillermain C., Bergeret A., Lopez-Cuesta J.-M., and Tersac G. SMC composites waste management as reinforcing fillers in polypropylene by combination of mechanical and chemical recycling processes. J Mater Sci 41 12 (2006) 3593-3602
9. Bream C.E., and Hornsby P.R. Comminuted thermoset recyclate as a reinforcing filler for thermoplastics: Part I characterisation of recyclate feedstocks. J Mater Sci 36 12 (2001) 2965-2975
10. Kouparitsas C.E., Kartalis C.N., Varelidis P.C., Tsenoglou C.J., and Papaspyrides C.D. Recycling of the fibrous fraction of reinforced thermoset composites. Polym Compos 23 4 (2002) 682-689
11. Conroy A., Halliwell S., and Reynolds T. Composite recycling in the construction industry. Composites A 37 8 (2006) 1216-1222
12. Ogi K., Shinoda T., and Mizui M. Strength in concrete reinforced with recycled CFRP pieces. Composites A 36 7 (2005) 893-902
13. Unser J.F., Staley T., and Larsen D. Advanced composites recycling. SAMPE J 32 5 (1996) 52-57
14. Vilcakova J., Saha P., Kresalek V., and Quadrat O. Pre-exponential factor and activation energy of electrical conductivity in polyester resin/carbon fibre composites. Synth Met 113 1-2 (2000) 83-87
15. Luo X., and Chung D.D.L. Electromagnetic interference shielding using continuous carbon-fiber carbon-matrix and polymer-matrix composites. Composites Part B: Eng 30 3 (1999) 227-231
16. Das N.C., Chaki T.K., Khastgir D., and Chakraborty A. Electromagnetic interference shielding effectiveness of conductive carbon black and carbon fiber-filled composites based on rubber and rubber blends. Adv Polym Technol 20 3 (2001) 226-236
17. Pickering S.J., Kelly R.M., Kennerley J.R., Rudd C.D., and Fenwick N.J. A fluidised-bed process for the recovery of glass fibres from scrap thermoset composites. Compos Sci Technol 60 4 (2000) 509-523
18. Huang C.Y., and Chiou T.W. The effect of reprocessing on the EMI shielding effectiveness of conductive fibre reinforced ABS composites. Eur Polym J 34 1 (1998) 37-43
19. Walker NJ. Papers - a new dimension in carbon fiber materials. In: Carbon fibres: technology, uses and prospects; 1986. p. 55-63.
20. Richardson PF, Dunn SN, Wilharm MT, Nielson SF. Effect of acrylamide copolymers on wet laid sheets produced from high l/d ratio polyester fibers. In: TAPPI proceedings - nonwovens conference. Nashville, TN (USA); 1988. p. 57-64.
21. Kennerley JR. Recycling fibres recovered from composite materials using a fluidised bed process. PhD Thesis, Department of Mechanical Engineering, University of Nottingham; 1998.
22. Hull D., and Clyne T.W. An introduction to composite materials (1996), Cambridge University Press, Cambridge
23. Helmer R.J.N., Covey G.H., Raverty W.D., and Vanderhoek N. Optimising simulated commercial paper for pulp quality analysis. Appita J 54 3 (1987) 289-295
24. Cresson T., and Luner P. The characterisation of paper formation. Part 2: The texture analysis of paper formation. Tappi J 73 12 (1990) 175-185
25. Nazhad MM, Harris EJ, Dodson CTJ, Kerekes RJ. The influence of formation on tensile strength of paper made from mechanical pulps. In: Tappi papermakers conference and trade fair. Vancouver, BC (Canada); 2000. p. 141-6.
26. Ichiura H., Nozaki M., Kitaoka T., and Tanaka H. Influence of uniformity of zeolite sheets prepared using a papermaking technique on VOC adsorptivity. Adv Environ Res 7 4 (2003) 975-979
27. Dudgeon C.D. Polyester resins. In: Dostal C.A. (Ed). Engineered materials handbook. Composites (1987), ASM International, Ohio 90-96
28. Pike G.E., and Seager C.H. Percolation and conductivity: a computer study. I. Phys Rev B 10 4 (1974) 1421
29. Farsi M. EMI/RFI shielding: theory and technique. Interference Technology Engineer's Master (1988) 228-238
30. Chiang W.Y., and Chiang Y.S. Effect of titanate coupling agent on electromagnetic interference shielding effectiveness and mechanical properties of PC-ABS-NCF composite. J Appl Polym Sci 46 4 (1992) 673-681
31. Ott H.W. Noise reduction techniques in electronic systems (1988), John Wiley and Son, New York
32. Bushko WC, Stokes VK, Wilson J. EMI shielding effectiveness of fiber-filled plastics - material testing issues. In: ANTEC. New York (USA); 1999. p. 1499-502.
33. Bigg D.M., Mirick W., and Stutz D.E. Measurement of EMI shielding of plastic composites using a dual chamber facility. Polym Test 5 3 (1985) 169-181
34. Bigg D.M. Effect of chemical exposure on the EMI shielding of conductive plastics. Polym Compos 8 1 (1987) 1-7
35. Colaneri N.F., and Shacklette L.W. EMI shielding measurements of conductive polymer blends. IEEE Trans Instrum Meas 41 2 (1992) 291-297
36. Jou W.S., Wu T.L., Chiu S.K., and Cheng W.H. The influence of fiber orientation on electromagnetic shielding in liquid-crystal polymers. J Electron Mater 31 3 (2002) 178-184
37. Miyake S, Umezu Y, Sagawa Y, Morita T, Yoshino R. Investigation related to construction method and performance of an electromagnetic shielded enclosure. In: IEEE international symposium on electromagnetic compatibility. Cherry Hill, NJ (USA); 1991. p. 120-5.
38. Ghose S, Pande DC. Identification of electromagnetic leakage from seams and joints and their prevention. In: 8th International conference on electromagnetic interference and compatibility. Chennai (India); 2003. p. 339-42.
39. Bigg D.M., and Stutz D.E. Plastic composites for electromagnetic interference shielding applications. Polym Compos 4 1 (1983) 40-46
40. Lee B.O., Woo W.J., Park H.S., Hahm H.S., Wu J.P., and Kim M.S. Influence of aspect ratio and skin effect on EMI shielding of coating materials fabricated with carbon nanofiber/PVDF. J Mater Sci 37 9 (2002) 1839-1843
41. Liang X., Ling L., Lu C., and Liu L. Resistivity of carbon fibers/ABS resin composites. Mater Lett 43 3 (2000) 144-147
42. Shinagawa S., Kumagai Y., and Urabe K. Conductive papers containing metallized polyester fibers for electromagnetic interference shielding. J Porous Mater 6 3 (1999) 185-190
43. Green S.B., Salkind N.J., Using Akey.T.M., and SS S.P. For windows: analyzing and understanding data (2000), Prentice Hall, New Jersey