Magnetic properties and heat capacity of cotio3 nanopowders prepared by stearic acid gel method

Journal of Experimental Nanoscience

Volumn 5, Issue 1, 2010, Pages 61-68

  Enhessari, M ^a   Parviz, A ^a   Ozaee, K ^a   Karamali, E ^b  

^a ISLAMIC AZAD UNIVERSITY   (Iran)

^b PAYAME NOOR UNIVERSITY   (Iran)

Author keywords

Heat capacity; Magnetic measurements; Nanostructures; Sol gel synthesis; X ray diffraction

Indexed keywords

CALCINED POWDER; COBALT ACETATE; COBALT TITANATE; COMPLEXING REAGENTS; CRYSTALLISATION; DIFFERENTIAL THERMALS; DRIED GEL; EMPIRICAL EQUATIONS; HEAT CAPACITIES; MAGNETIC MEASUREMENTS; NANO POWDERS; ROOM TEMPERATURE; SOL-GEL SYNTHESIS; STEARIC ACID GEL METHODS; SUPERPARAMAGNETICS; THERMAL ANALYSIS; VIBRATING SAMPLE MAGNETOMETER; WET-CHEMISTRY SYNTHESIS;

ACIDS; CALCINATION; COBALT; COBALT COMPOUNDS; DIFFERENTIAL SCANNING CALORIMETRY; MAGNETIC PROPERTIES; MAGNETIC VARIABLES MEASUREMENT; MONITORING; NANOSTRUCTURED MATERIALS; NANOSTRUCTURES; SOL-GEL PROCESS; SOL-GELS; SOLS; SPECIFIC HEAT; STEARIC ACID; SUPERPARAMAGNETISM; THERMOANALYSIS; X RAY DIFFRACTION; X RAY POWDER DIFFRACTION;

GELS;

COBALT TITANATE; NANOPARTICLE; NANOPOWDER; STEARIC ACID; TITANIUM DIOXIDE; UNCLASSIFIED DRUG;

ARTICLE; CONTROLLED STUDY; CRYSTALLIZATION; DIFFERENTIAL SCANNING CALORIMETRY; MAGNETISM; PARTICLE SIZE; PRIORITY JOURNAL; ROOM TEMPERATURE; THERMAL ANALYSIS; THERMOGRAVIMETRY; X RAY DIFFRACTION;

EID: 77949372728     PISSN: 17458080     EISSN: 17458099     Source Type: Journal    
DOI: 10.1080/17458080903260936     Document Type: Article

References (30)

1. O. Yamamoto, Y. Takeda, R. Kanno, and M. Noda, Perovskite-type oxides as oxygen electrodes for high temperature oxide fuel cells, Solid State Ion. 22(2-3) (1987), pp. 241-246.
2. A.R. Phani and S. Santucci, Structural characterization of nickel titanium oxide synthesized by sol-gel spin-coating technique, Mater. Lett. 50(4) (2001), pp. 240-245.
3. R. Fisch, Critical behavior of randomly pinned spin-density waves, Phys. Rev. B 51(17) (1995), pp. 11507-11514.
4. 4Co,Mn), Chem. Lett. 67 (1988), pp. 1979-1982.
5. 3, Phys. Rev. Lett. 78 (1997), pp. 346-349.
6. D.J. Taylor, P.F. Fleig, and R.A. Page, Characterization of nickel titanate synthesized by sol-gel processing, Thin Solid Films 408 (2002), pp. 104-110.
7. H. Obayashi, Y. Sakurai, and T. Gejo, Perovskite-type oxides as ethanol sensors, J. Solid State Chem. 17 (1976), pp. 299-303.
8. N. Dharmaraj, H.C. Park, C.K. Kim, H.Y. Kim, and D.R. Lee, Nickel titanate nanofibers by electrospinning, Mater. Chem. Phys. 87 (2004), pp. 5-9.
9. 3, Appl. Catal. B 3 (1994), pp. 259-274.
10. H. Liu, B. Wang, R. Wang, and X. Liu, Preparation and electric characteristics of gadolinium- substituted bismuth titanate ferroelectric thin films, Mater. Lett. 61(11-12) (2007), pp. 2457-2459.
11. D.G. Wang, C.Z. Chen, J. Ma, and T.H. d Liu, Lead-based titanate ferroelectric thin films fabricated by a sol-gel technique, Appl. Surf. Sci. 255(5) (2008), pp. 1637-1645.
12. 3) thin films, Physica. B: Condens. Matter 403(17) (2008), pp. 2678-2683.
13. W. Buchner, Industrial Inorganic Chemistry, VCH, Weinheim, Federal Republic of Germany, New York, NY, USA, 1989, p. xxvi, 614.
14. 3, Mater. Res. Bull. 34(10-11) (1999), pp. 1789-1795.
15. T. Kazuyuki, U. Yasuo, T. Shuji, I. Takashi, and U. Akifumi, Catalyst preparation procedure probed by EXAFS spectroscopy: 2. Cobalt on titania, J. Am. Chem. Soc. 106 (1984), pp. 5172-5178.
16. J. Smit and H.P. Wijn, Ferrites: Physical Properties of Ferrimagnetic Oxides in Relation to their Technical Applications, Wiley, New York, 1959, p. 369.
17. B.D. Cullity, Introduction to Magnetic Materials, Addison-Wesley Pub. Co., Reading, Mass, 1972, p. xvii, 666.
18. Y. Sahoo, M. Cheon, S. Wang, H. Luo, E.P. Furlani, and P.N. Prasad, Field-directed self- assembly of magnetic nanoparticles, J. Phys. Chem. B 108(11) (2004), pp. 3380-3383.
19. 4 with a few nanometers, J. Magn. Magn. Mater. 303(2) (2006), pp. e315-e317.
20. G. Cao, Nanostructures and Nanomaterials: Synthesis, Properties and Applications, Imperial College Press, London, Hackensack, NJ, 2004, p. xiv, 433.
21. 3 nanopowders prepared by stearic acid gel method, Mater. Lett. 62 (2008), pp. 3679-3681.
22. J. Zarzycki, Past and present of sol-gel science and technology, J. Sol-Gel Sci. Technol. 8(1-3) (1997), p. 17.
23. B.D. Cullity, Elements of X-ray Diffraction, 2nd ed., Addison-Wesley, Reading, MA, 1978.
24. S.B. Lang, Sourcebook of Pyroelectricity, Gordon and Breach Science Publishers, London, New York, 1974, p. xv, 562.
25. Kucherov R. Yan, Piezo-pyroelectric energy converter and method. Kucherov R. Yan (United States), inventors, Thermodyne Technologies, (United States), Canadian patent, A 2238771 30508.1997 July 21.
26. 3 with exchange frustration, J. Phys. Soc. Japan 60(6) (1991), pp. 2057-2066.
27. 3, Acta Cryst. 17(3) (1964), pp. 240-242.
28. 3, J. Phys. Chem. Solids 10(1) (1959), pp. 35-43.
29. A. Hernando, E. Navarro, A.R. Yavari, D. Fiorani, and M. Rosenberg, Magnetic properties of disordered grain boundaries in nanocrystalline FeRh alloys, J. Magn. Magn. Mater. 203(1-3) (1999), pp. 223-225.
30. P.N. Lisboa-Filho, A. Zennatti, G.M. Casali, and C.A. Paskocimas, Magnetic behavior at low temperatures of Ti Oxide polycrystalline samples, J. Sol-Gel Sci. Technol. 24(3) (2002), pp. 241-245.