Colloidal processing and sintering of porous percolative Ni-YSZ layers

Journal of Membrane Science

Volumn 352, Issue 1-2, 2010, Pages 55-62

  Gonzalo Juan, Isabel ^a   Ferrari, Begoña ^a   Colomer, María T ^a   Sanchez Herencia A J ^a  

^a INSTITUTO DE CERÁMICA Y VIDRIO   (Spain)

Author keywords

Electrophoretic deposition; Percolation; Porosity; Rheology; Sintering

Indexed keywords

A-THERMAL; COLLOIDAL PROCESSING; DISPERSED POWDER; ELECTROCATALYTIC; ELECTROPHORETIC DEPOSITION; ELECTROPHORETIC DEPOSITIONS; MECHANICALLY STABLE; METAL-CERAMIC COMPOSITES; MICRO-STRUCTURAL CHARACTERIZATION; NI PARTICLES; NICKEL PARTICLES; PERCOLATION; PHASE SEGREGATIONS; POROUS NI; POROUS STRUCTURES; SELF-SUPPORTED LAYERS; STRUCTURAL DENSITY; SUSPENSION PARAMETERS;

ELASTICITY; ELECTROPHORESIS; PHASE SEPARATION; PLASTICITY; POROSITY; POWDER METALS; RHEOLOGY; SOLVENTS; VISCOSITY;

SINTERING;

NICKEL;

ARTICLE; CHEMICAL ANALYSIS; CHEMICAL REACTION; COLLOID; DENSITY; ELECTROPHORESIS; MORPHOLOGY; PARTICLE SIZE; PERCOLATION; PHASE SEPARATION; PLASTICITY; POROSITY; PRIORITY JOURNAL; SUSPENSION; TEMPERATURE; ULTRASOUND; VISCOSITY;

EID: 77949332546     PISSN: 03767388     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.memsci.2010.01.060     Document Type: Article

References (32)

1. Rezaei M., Alavi S.M., Sahebdelfar S., and Yan Z.-F. A highly stable catalyst in methane reforming with carbon dioxide. Scripta Mater. 61 (2009) 173-176
2. Lercher J.A., Bitter J.H., Hally W., Niessen W., and Seshan K. Design of stable catalysts for methane-carbon dioxide reforming. In: Hightower J.W., Delgass W.N., Iglesia E., and Bell A.T. (Eds). Studies in Surface Science and Catalysis (1996), Elsevier Science Publ. B V, Amsterdam 463-472
3. Zhu J., van Ommen J.G., Knoester A., and Lefferts L. Effect of surface composition of yttrium-stabilized zirconia on partial oxidation of methane to synthesis gas. J. Catal. 230 (2005) 291-300
4. Moya J.S., Lopez-Esteban S., and Pecharroman C. The challenge of ceramic/metal microcomposites and nanocomposites. Prog. Mater. Sci. 52 (2007) 1017-1090
5. He D., and Ekere N.N. Effect of particle size ratio on the conducting percolation threshold of granular conductive-insulating composites. J. Phys. D: Appl. Phys. 37 (2004) 1848-1852
6. Martinelli J.R., and Sene F.F. Electrical resistivity of ceramic-metal composite materials: application in crucibles for induction furnaces. Ceram. Int. 26 (2000) 325-335
7. Campana R., Larrea A., Peña J.I., and Orera V.M. Ni-YSZ cermet micro-tubes with textured surface. J. Eur. Ceram. Soc. 29 (2009) 85-90
8. Ohga E., Arima T., Idemitsu K., and Inagaki Y. Sol-gel preparation and characterization of Ni-YSZ cermet electrode. Prog. Nucl. Energy 49 (2007) 546-554
9. Restivo T.A.G., and de Mello-Castanho S.R.H. Nickel-zirconia cermet processing by mechanical alloying for solid oxide fuel cell anodes. J. Power Sources 185 (2008) 1262-1266
10. Dal Grande F., Thursfield A., and Metcalfe I.S. Morphological control of electroless plated Ni anodes: influence on fuel cell performance. Solid State Ionics 179 (2008) 2042-2046
11. Rahman A., Kim J.H., Lee K.H., and Lee B.T. Microstructure characterization and electrical conductivity of electroless nano Ni coated 8YSZ cermets. Surf. Coat. Technol. 202 (2008) 2182-2188
12. Lee K.R., Pyo Y.S., So B.S., Kim S.M., Lee B.K., Hwang J.H., Kim J., Lee J.H., and Lee H.W. Interpretation of the interconnected microstructure of an NiO-YSZ anode composite for solid oxide fuel cells via impedance spectroscopy. J. Power Sources 158 (2006) 45-51
13. Finnerty C.M., and Ormerod R.M. Internal reforming over nickel/zirconia anodes in SOFCS oparating on methane: influence of anode formulation, pre-treatment and operating conditions. J. Power Sources 86 (2000) 390-394
14. Peters R., Dahl R., Klüttgen U., Palm C., and Stolten D. Internal reforming of methane in solid oxide fuel cell systems. J. Power Sources 106 (2002) 238-244
15. Marinsek M., Zupan K., and Maeek J. Ni-YSZ cermet anodes prepared by citrate/nitrate combustion synthesis. J. Power Sources 106 (2002) 178-188
16. 2 cermet anodes of solid oxide fuel cells by ion impregnation. J. Electrochem. Soc. 149 (2002) A1175-A1183
17. 2 cermet electrodes of solid oxide fuel cells. J. Mater. Sci. 38 (2003) 3775-3782
18. Pratihar S.K., Dassharma A., and Maiti H.S. Properties of Ni/YSZ porous cermets prepared by electroless coating technique for SOFC anode application. J. Mater. Sci. 42 (2007) 7220-7226
19. 3-Ni aqueous suspensions. J. Am. Ceram. Soc. 89 (2006) 1890-1896
20. 3-[delta] cermet anodes for IT-SOFCs. Solid State Ionics 180 (2009) 715-720
21. Garcia P., Ferrari B., Moreno R., Sanchez-Herencia A.J., and Colomer M.T. YSZ/Ni-YSZ semi-cells shaped by electrophoretic deposition. J. Eur. Ceram. Soc. 27 (2007) 4241-4244
22. Hernandez N., Sanchez-Herencia A.J., and Moreno R. Forming of nickel compacts by a colloidal filtration route. Acta Mater. 53 (2005) 919-925
23. Corbin S.F., Clemmer R.M.C., and Yang Q. Development and characterization of porous composites for solid oxide fuel cell anode conduction layers using ceramic-filled highly porous Ni foam. J. Am. Ceram. Soc. 92 (2009) 331-337
24. Clemmer R.M.C., and Corbin S.F. Influence of porous composite microstructure on the processing and properties of solid oxide fuel cell anodes. Solid State Ionics 166 (2004) 251-259
25. Sridhar S., and Pal U.B. Effect of slurry properties on anode cermets for solid oxide fuel cells. Powder Technol. 88 (1996) 173-178
26. Ferrari B., Sanchez-Herencia A.J., and Moreno R. Nickel-alumina graded coatings obtained by dipping and EPD on nickel substrates. J. Eur. Ceram. Soc. 26 (2006) 2205-2212
27. Sanchez-Herencia A.J. Water based colloidal processing of ceramic laminates. Key Eng. Mater. 333 (2007) 39-48
28. Cherng J.S., Sau J.R., and Chung C.C. Aqueous electrophoretic deposition of YSZ electrolyte layers for solid oxide fuel cells. J. Solid State Electrochem. 12 (2008) 925-933
29. Waldbillig D., Wood A., and Ivey D.G. Thermal analysis of the cyclic reduction and oxidation behaviour of SOFC anodes. Solid State Ionics 176 (2005) 847-859
30. Gutierrez C., Sanchez-Herencia A.J., and Moreno R. Plastic or pseudoplastic? Methods for determining and analysing the yield stress of ceramic slips. Bol. Soc. Esp. Ceram. V 39 (2000) 105-117
31. Mora M., Moreno R., and Sánchez-Herencia A.J. Nickel sheets from suspensions of the metallic powders in water. Adv. Eng. Mater. 10 (2008) 982-985
32. H.A. Barnes, Shear-thinning Liquids, 1st edn., University of Wales, Institute of Non-Newtonian Fluid Mechanism, Aberystwyth, 2000.