Mechanical, degradation, and interfacial properties of synthetic degradable fiber reinforced polypropylene composites

Journal of Reinforced Plastics and Composites

Volumn 29, Issue 3, 2010, Pages 466-476

  Khan, Ruhul A ^a   Khan, Mubarak A ^a   Sultana, Sabrina ^b   Nuruzzaman Khan, M ^b   Shubhra, Quazi T H ^b   Noor, Farhana G ^b  

^a INSTITUTE OF NUCLEAR SCIENCE AND TECHNOLOGY   (Bangladesh)

^b UNIVERSITY OF DHAKA   (Bangladesh)

Author keywords

Composites; Compression molding; Degradable fibers; Interfacial properties; Mechanical properties; Polypropylene

Indexed keywords

AQUEOUS MEDIUM; BENDING MODULI; COMPOSITE SYSTEMS; COMPOSITES; DEGRADABLE FIBERS; DEGRADATION TEST; ELONGATION AT BREAK; FIBER REINFORCED; FIBER REINFORCED POLYPROPYLENE COMPOSITES; FIBER-MATRIX ADHESION; INTERFACIAL PROPERTIES; INTERFACIAL PROPERTY; INTERFACIAL SHEAR STRENGTH; MATRIX; ROOM TEMPERATURE; SINGLE FIBER FRAGMENTATION TEST; TENSILE MODULI; UNIDIRECTIONAL COMPOSITES;

BENDING STRENGTH; DEGRADATION; FIBERS; IMPACT STRENGTH; MECHANICAL PROPERTIES; PLASTIC PRODUCTS; POLYPROPYLENES; REINFORCED PLASTICS; SHEAR STRENGTH; TENSILE STRENGTH; THERMOPLASTICS;

COMPRESSION MOLDING;

EID: 77649253797     PISSN: 07316844     EISSN: 15307964     Source Type: Journal    
DOI: 10.1177/0731684408100699     Document Type: Article

References (26)

1. 2 Nano Composites with Improved Mechanical Properties, Rev. Adv. Mater. Sci., 6: 169-175.
2. Karmaker, A.C. and Hinrichsen, G. (1999). Processing and Characterization of Jute Fiber Reinforced Thermoplastic Polymers, Polym. Plast. Technol. Eng., 30: 609-621.
3. Khan, M.A., Hinrichsen, G. and Drzal, L.T. (2001). Influence of Noble Coupling Agents on Mechanical Properties of Jute Reinforced Polypropylene Composites, J. Mat. Sci. Lett., 20: 1211-1713.
4. Wolcott, M. P. (ed.) (1993). Wood-fiber/Polymer Composites, Forest Product Society, Madison, WI, USA
5. Bledzki, A.K. and Gassan, J. (1999). Composites Reinforced with Cellulose Based Fibers, J. Prog. Polym. Sci., 24: 221-274.
6. Wambua, P., Ivan, J. and Verport, I. (2003). Natural Fibers: Can They Replace Glass in Fiber Reinforced Plastics, J. Comp. Sci. and Tech., 63: 1259-1264.
7. Czvikovszky, T. (1995). Reactive Recycling of Multiphase Polymer Systems, Nucl. Instr. Methods Phys. Res., B, 105: 233-237.
8. Lin, S.T., Krebs, S.L., Kadiyala, S., Leong, K.W. and Kumar, B. (1994). Development of Bioabsorpable Glass Fibers, Biomaterials, 15: 1057-1061.
9. Jiang, G., Evans, M.E., Jones, I.A., Rudd, C.D., Scotchford, C.A. and Walker, G.S. (2005). Preparation of Poly(ε-caprolactone)/continuous Bioglass Fiber Composite Using Monomer Transfer Moulding for Bone Implant, Biomaterials, 26: 2281-2288.
10. Hench, L.L. and Thomson, I. (2000). Medical Applications of Composites, Comprehensive Composite Materials, In: Kelly, A. and Zweben, C. (eds). Vol. 6, pp. 727-753, Elsevier Science Publishing Company Ltd., United Kingdom.
11. Ahmed, I., Lewis, M., Olsen, I. and Knowles, J.C. (2004). Phosphate Glasses for Tissue Engineering: Part 1. Processing and Characterisation of a Ternary-based P2O5-CaO-Na2O Glass Fiber System, Biomaterials, 25: 501-507. (Pubitemid 37329702)
12. Ahmed, I., Collins, C.A., Lewis, M.P., Oslen, I. and Knowles, J.C. (2004). Processing, Characterisation and Biocompatibility of Iron-Phosphate Glass Fibers for Tissue Engineering, Biomaterials, 25: 3223-3232. (Pubitemid 38234783)
13. Matsusue, Y., Oka, M., Shikinami, Y. and Ikada, Y. (1992). In vitro and in vivo Studies on Bioabsorbable Ultra-High-Strength Poly (L-lactide) rods, J. Biomed. Mater. Resear., 26: 1553-1567.
14. Kelly, B.S., Dunn, R.L. and Casper, R.A. (1987). Totally Resorbable High-Strength Composite Material, Polym. Sci. Technol., Advances in Biomedical Polymers, 35: 75-85.
15. Andriano, K.P. and Daniels, A.U. (1992). Biocompatibility and Mechanical Properties of a Totally Absorbable Composite Material for Orthopaedic Fixation Devices, J. Appl. Biomater., 3: 197-206.
16. Park, J.B. and Lakes, R.S. (1992). Biomaterials: An Introduction, 2nd edn, pp. 1-5, 174-194. Plenum Press, USA.
17. Cabral, F.S., Paiva, M.C., Nunes, J.P. and Bernardo, C.A. (2003). A Novel Technique for The Interfacial Characterisation of Glass Fiber-Polypropylene Systems, Polym. Testi., 22: 907-913.
18. National Physical Laboratory Report No. MATC(A) (2001). 16: 1-69.
19. Greenfield, M.J., Pedicini, A. and Penn, L.S. (2000). Development of a Single Fiber Fragmentation Test for High Strain Rates, Int. J. Adhesion and Adhesives, 20: 403-407.
20. Zhou, X.F., Wagner, H.D. and Nutt, S.R. (2001). Interfacial Properties of Polymer Composites Measured by Push-Out And Fragmentation Tests, Composites: Part A, 32: 1543-1551.
21. Slivka, M.A., Chu, C.C. and Adisaputro, I.A. (1997). Fiber-matrix Interface Studies on Bioabsorbable Composite Materials for Internal Fixation of Bone Fractures. I. Raw Material Evaluation and Measurement of Fiber-matrix Interfacial Adhesion, J. Biomed. Mater. Research., 36: 469-477.
22. Kelly, A. and Tyson, W.R. (1965). Tensile Properties of Fiber Reinforced Metals: Copper/Tungsten, Copper/Molybdenum, J. Mechanics and Physics of Solids, 13: 329-350.
23. Drzal, L.T., Rich, M.J., Koeng, M.F. and Lloyd, P.F. (1983). Adhesion of Graphite Fibers to Epoxy Matrices, Journal of Adhesion, 16: 133-152.
24. Wu, H.F. and Netravali, A.N. (1992). Weibull Analysis of Strength-length Relationships in Single Nickell on SiC Fibers, J. Material Science, 27: 3318-3324.
25. Bunker, B.C., Arnold, G.W. and Wilder, J.A. (1984). Phosphate Glass Dissolution in Aqueous Solutions, J. Non-Crystalline Solids, 64, 291-316.
26. Honggang, W., Zheng, A. and Dae, G. (1999). Study on the Interfacial Bonding of Glass Fiber Reinforced Polypropylene Composite. 2. Effect Elements on Interfacial Shear Strength and Determination of its Optimum, East China University of Technology, Fuhe Cailiao Xuebao, 16: 51-56.