Solid oxide fuel cells

Materials for Fuel Cells

Volumn , Issue , 2008, Pages 280-343

  Huang, K ^a  

^a SIEMENS CORPORATE RESEARCH   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

FUEL CELLS;

SOLID OXIDE FUEL CELLS (SOFC);

EID: 77649251902     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1533/9781845694838.280     Document Type: Chapter

References (102)

1. 3 (Ln=lanthanides) system. Solid State Ionics 1999, 121:133-139.
2. Goodenough J.B. Oxide-ion electrolytes. Ann. Rev. Mater. Res. 2003, 33:91-128.
3. Huang K. Cell power enhancement via materials selection. Proc. 7th Eur. SOFC forum 2006, P0303-037. Lucerne, Switzerland.
4. δ. Solid State Ionics 2000, 132:167-180.
5. Mori M., Hiei Y., Sammes N., Tompsett G.A. Thermal expansion behaviors and mechanisms for Ca- and Sr-doped lanthanum manganite perovskites under oxidizing atmospheres. J. Electrochem. Soc. 2000, 147(4):1295-1302.
6. Adler S.B. Chemical expansivity of electrochemical ceramics. J. Am. Ceram. Soc. 2001, 84(9):2117-2119.
7. 3-δ. Solid State Ionics 2000, 129:163-177.
8. 3±δ. J. Solid State Chem. 1994, 110:109-112.
9. 3±δ. J. Solid State Chem. 1994, 110:100-105.
10. 3±δ (A=Ca, Sr, Ba). J. Solid State Chem. 1994, 110:106-108.
11. Taimatsu H., Wada K., Kaneko H. Mechanism of reaction between lanthanum manganite and yttria-stabilized zirconia. J. Am. Ceram. Soc. 1992, 75(2):401-405.
12. 3 and 8mol% yttria-stabilized zirconia. J. Am. Ceram. Soc. 2004, 87(6):1110-1116.
13. Huang K. Gas-diffusion process in a tubular cathode substrate of an SOFC: I Theoretical analysis of gas-diffusion process under cylindrical coordinate system. J. Electrochem. Soc. 2004, 151:A716.
14. Tanner C.W., Fung K.Z., Virkar A.V. The effect of porous composite electrode structure on solid oxide fuel cell performance. J. Electrochem. Soc 1997, 144(1):21-30.
15. Spacil H.S. US Patent 1970, 3:558,360.
16. 2 cermet electrode of the solid oxide fuel cell. Solid State Ionics 1999, 123:209-224.
17. Brown M., Primdahl S., Mogensen M. Structure/performance relations for Ni/yttia-stablized zirconia anode for solid oxide fuel cells. J. Electrochem. Soc. 2000, 147(2):475-485.
18. Wen C., Kato R., Fukunaga H., Ishitani H., Yamada K. The overpotential of nickel/yttia-stabilized zirconia cermet anodes used in solid oxide fuel cells. J. Electrochem. Soc. 2000, 147(6):2076-2080.
19. 2O solid oxide fuel cells. J. Electrochem. Soc. 2001, 148(3):A209-A219.
20. Murray E.P., Tsai T., Barnett S.A. Direct-methane fuel cell with a ceria-based anode. Nature 1999, 400:649-651.
21. Park S., Vohs J.M., Gorte R.J. Direct oxidation of hydrocarbons in a solid oxide fuel cell. Nature 2000, 404:265-267.
22. Costa-Nunes O., Vohs J.M., Gorte R.J. A study of direct-conversion SOFC with n-butane at higher fuel utilization. J. Electrochem. Soc. 2003, 150(7):A858-A863.
23. Craciun R., Park S., Gorte R.J., Vohs J.M., Wang C., Worrell W.L. A novel method for preparing anode cermets for solid oxide fuel cells. J. Electrochem. Soc. 1999, 146(11):4019-4022.
24. Park S., Gorte R.J., Vohs J.M. Tape cast solid oxide fuel cells for the direct oxidation of hydrocarbons. J. Electrochem. Soc. 2001, 148(5):A443-A447.
25. Zhan Z., Barnett S.A. An octane-fueled solid oxide fuel cell. Science 2005, 308:844-847.
26. Murray E.P., Harris S.J., Liu J., Barnett S.A. 'Direct solid oxide fuel cell operation using isooctane', Electrochem. Solid State Lett. 2006, 9(6):A292-294.
27. Kim H., Park S., Vohs J.M., Gorte R.J. Direct oxidation of liquid fuels in a solid oxide fuel cell. J. Electrochem. Soc. 2001, 148(7):A693-A695.
28. He H., Gorte R.J., Vohs J.M. 'Highly sulfur tolerant Cu-ceria anodes for SOFCs', Electrochem. Solid State Lett. 2005, 8(6):A279-A280.
29. Mogensen M., Sammes N.M., Tompsett G.A. Physical, chemical and electrochemical properties of pure and doped ceria. Solid State Ionics 2000, 129:63-94.
30. Inaba H., Tagawa H. Ceria-based solid electrolytes. Solid State Ionics 1996, 83:1-16.
31. 2-y/2 electrode for IT-SOFC operation at 500 °C'. Solid State Ionics 2000, 129:95-110.
32. Ralph J.M., Rossignol C., Kumar R. Cathode materials for reduced-temperature SOFCs. J. Electrochem. Soc. 2003, 150(11):A1518-A1522.
33. 3'δ. J. Electrochem. Soc. 1989, 136:2082-2088.
34. Goodenough J.B. Bond-length fluctuation in the copper-oxide superconductors' in Progress in Solid State Chemistry 1971, 5:145-399.
35. 3-δ. Solid State Ionics 1995, 76:273-283.
36. 3'. J. Solid State Chem. 1995, 118:117-124.
37. 3-δ (M = Sr, Ba, Ca). J. Electrochem. Soc. 1996, 143(9):2722-2729.
38. 3-δ (xã0.5). Solid State Ionics 1990, 40:239-243. 41.
39. 3-δ. J. Solid State Chem. 1989, 80:102-111.
40. 3-δ. J. Solid State Chem. 1985, 58:257-266.
41. Yang Z., Lin Y.S. A semi-empirical equation for oxygen nonstoichiometry of perovskite-type ceramics. Solid State Ionics 2002, 150:245-254.
42. 3-δ. J. Electrochem. Soc. 2000, 147(11):4001-4007.
43. 3 as SOFC cathode. Solid State Ionics 2000, 132:279.
44. 3-δ electrodes. Solid State Ionics 1998, 111:125-134.
45. Adler S.B., Lane J.A., Steele B.C.H. Electrode kinetics of porous mixed-conducting oxygen electrodes. J. Electrochem. Soc. 1996, 143(11):3554-3564.
46. 8 (M = Ce, Hf, or Zr). Solid State Ionics 1990, 44:21-31.
47. Manthiram A., Kuo J.F., Goodenough J.B. Characterization of oxygen-deficient perovskites as oxide-ion electrolytes. Solid State Ionics 1993, 62:225-234.
48. 3 perovskite type oxide as a new oxide ionic conductor. J. Am. Chem. Soc. 1994, 116:3801.
49. Feng M., Goodenough J.B. A superior oxide-ion electrolyte. Eur. J. Solid State Inorg. Chem. 1994, T-31:663-672.
50. 1.95 ceramics. J. Am. Ceram. Soc. 1998, 81(2):357-362.
51. 3: I, Phase relationship and electrical properties. J. Am. Ceram. Soc. 1998, 81(10):2565-2575.
52. Kupczyk W.K., Kobertz D., Miller M., Singheiser L., Hilpert K. Vaporization of Sr- and Mg-doped Lanthanum gallate and implications for solid oxide fuel cells. J. Am. Ceram. Soc. 2001, 148(6):E276-E281.
53. 3 system. J. Am. Ceram. Soc. 2002, 85(9):2299-2305.
54. 3-δ. Solid State Ionics 2001, 140:105-113.
55. 3. Solid State Ionics 2002, 154-155:481-486.
56. 3 ceramic fuel cell. J. Electrochem. Soc. 1996, 143(11):3630-3636.
57. 3-δby doping Co. Chem. Mater. 1999, 11:2081-2088.
58. 3 perovskite oxide. Solid State Ionics 2000, 135:631-636.
59. 3 perovskites new cathode materials for solid oxide fuel cells. J. Electrochem. Soc. 1998, 145(9):3220-3227.
60. Huang K., Wan J., Goodenough J.B. Oxide-ion conducting ceramics for solid oxide fuel cells. J. Mater. Sci. 2001, 36:1093-1098.
61. 3-δ membrane: surface exchange kinetics versus bulk diffusion. Solid State Ionics 1997, 100:77-85.
62. Huang K., Goodenough J.B. Oxygen permeation through cobalt-containing perovskites: surface oxygen exchange vs. lattice oxygen diffusion. J. Electrochem. Soc. 2001, 148(5):E203-E214.
63. 3. J. Electrochem. Soc. 1997, 144(10):3620-3624.
64. 3: III, Performance tests of single ceramic fuel cells. J. Am. Ceram. Soc. 1998, 81(10):2581-2585.
65. Hrovat M., Ahmad-Khanlou A., Samardzija Z., Holc J. Interactions between lanthanum gallate based solid electrolyte and ceria. Mater. Res. Bull. 1999, 34(12):2027-2034. 13.
66. Huang K., Wan J., Goodenough J.B. Increasing power density of LSGM-based solid oxide fuel cells using new anode materials. J. Electrochem. Soc. 2001, 148(7):A788-A794.
67. Yasuda I., Hikita T. Electrical conductivity and defect structure of calcium-doped lanthanum chromites. J. Electrochem. Soc. 1993, 140(6):1699-1704.
68. Yasuda I., Hishinuma M. Electrochemical properties of doped lanthanum chromites as interconnectors for solid oxide fuel cells. J. Electrochem. Soc. 1996, 143(5):1583-1590.
69. Meadowcroft D.B. Properties of strontium-doped lanthanum chromite. Br. J. Appl. Phys., Ser. 2 1969, 2:1225-1233.
70. Sakai N., Kawada T., Yokogawa H., Dokiya M. Sinterability and electrical conductivity of calcium doped lanthanum chromite. J. Mater. Sci'. 1990, 25:4531.
71. Chick L.A., Liu J., Stevenson J.W., Armstrong T.R., McCready D.E., Maupin G.D., Coffey G.W., Coyle C.A. Phase transitions and transient liquid-phase sintering in calcium-substituted lanthanum chromite. J. Am. Ceram. Soc. 1997, 80(8):2109-2120.
72. 3-δ, x = 0.05, 0.10 and 0.15, investigated by Knudsen effusion mass spectrometry. J. Electrochem. Soc. 2001, 148(6):A657-A661.
73. Yang Z., Hardy J.S., Walker M.S., Xia G., Simner S.P., Stevenson J.W. Structure and conductivity of thermally grown scales on ferritic Fe-Cr-Mn steel for SOFC interconnect applications. J. Electrochem. Soc. 2004, 151(11):A1825-A1831.
74. Yang Z., Hardy J.S., Walker M.S., Xia G., Simner S.P., Stevenson J.W. Structure and conductivity of thermally grown scales on ferritic Fe-Cr-Mn steel for SOFC interconnect applications. J. Electrochem. Soc. 2004, 151(11):A1825-A1831.
75. Huang K., Hou P.Y., Goodenough J.B. Characterization of iron-based alloy interconnects for reduced temperature solid oxide fuel cells. Solid State Ionics 2000, 129:237-250.
76. Qudakkers W.J., Pirón-Abelián J., Shemet V. Metallic materials in solid oxide fuel cells. Mater. Res. 2004, 7(1):203-208.
77. Horita T., Kishimoto H., Yamaji K., Xiong Y., Sakai N., Brito M.E., Yokokawa H. Oxide scale formation and stability of Fe-Cr alloy interconnects under dual atmospheres and current flow conditions for SOFCs. J. Electrochem. Soc. 2006, 153(11):A2007-A2012.
78. T. Uehara, T. Ohno and A. Toji, 'Development of ferritic Fe Cr alloy for SOFC separator', Proc. 5th Eur. SOFC Forum, Lucerne, Switzerland, July 2002, p281.
79. 2O for solid oxide fuel cells. J. Electrochem. Soc. 2006, 152(11):A2193-A2198.
80. Kofstad P., Bredesen R. High temperature corrosion in SOFC environments. J. Electrochem. Soc. 1992, 52:69-72.
81. Hilpert K., Das D., Miller M., Peck D.H., Weiss R. Chromium vapor species over solid oxide fuel cell interconnect materials and their potential for degradation processes. J. Electrochem. Soc. 1996, 143(11):3642-3647.
82. 3 electrodes in solid oxide fuel cells. J. Electrochem. Soc. 2000, 147(11):4013-4022.
83. 3 cathodes of solid oxide fuel cells. J. Electrochem. Soc. 2006, 153(1):A127-A134.
84. 3 and the high chromium ferritic steel Crofer22APU. J. Electrochem. Soc. 2006, 153(4):A765-A773.
85. Hou P.Y., Stringer J. Effect of surface-applied reactive element oxide on the oxidation of binary alloys containing Cr. J. Electrochem. Soc. 1987, 134(7):1836-1849.
86. Stringer J. The reactive element effect in high-temperature corrosion. Mater. Sci. Eng. 1989, A120:129-137.
87. Huang K., Hou P.Y., Goodenough J.B. Reduced area specific resistance for iron-based metallic interconnects by surface oxide coatings. Mater. Res. Bull. 2001, 36:81-95.
88. Pint B.A. Experimental observations in support of the dynamic-segregation theory to explain the reactive-element effect. Oxidation of Metals 1996, 45(1/2):1-37.
89. Horita T., Xiong Y., Yamaji K., Sakai N., Yokokawa H. Evaluation of Fe-Cr alloys as interconnects for reduced operation temperature SOFCs. J. Electrochem. Soc. 2003, 150(3):A243-A248.
90. Lu Z., Zhu J., Payzant E.A., Paranthanman M.P. Electrical conductivity of the manganese chromite spinel solid solution. J. Am. Ceram. Soc. 2005, 88(4):1050-1053.
91. 3 cathode materials for solid oxide fuel cells. J. Electrochem. Soc. 2000, 147(9):3251-3256.
92. Yang Z., Xia G., Maupin G.D., Stevenson J.W. Evaluation of perovskite overlay coatings on ferritic stainless steels for SOFC interconnect applications. J. Electrochem. Soc. 2006, 153(10):A1852-A1858.
93. Yang Z., Xia G., Simner S.P., Stevenson J.W. Thermal growth and performance of manganese cobaltite spinel protection layers on ferritic stainless steel SOFC interconnects. J. Electrochem. Soc. 2005, 152(9):A1896-A1901.
94. Yang Z., Meinhardt K.D., Stevenson J.W. Chemical compatibility of barium calcium aluminosilicate-based sealing glasses with ferritic stainless steel interconnect in SOFCs. J. Electrochem. Soc. 2003, 150(8):A1095-A1101.
95. de Souza S., Visco S.J., De Jonghe L.C. Thin-film solid oxide fuel cell with high performance at low-temperature. Solid State Ionics 1997, 98:57-61.
96. Villarreal I., Jacobson C., Leming A., Matus Y., Visco S., De Jonghe L. Metal-supported solid oxide fuel cells. Electrochem Solid State Lett. 2003, 6(9):A178-A179.
97. Franco T., Ilhan Z., Lang M., Schiller G., Szabo P. Investigation of porous metallic substrates for plasma sprayed thin-film SOFCs. Electrochem. Soc. Proc. 2005, 7:344-352.
98. Isenberg A.O. Electrochemical Society Symposium Electrode Materials. Process for Energy Conversion and Storage 1977, 77(6):572-581.
99. Refke A., Barbezat G. Low pressure plasma spray (LPPS) as a tool for the deposition for functional SOFC components 2004, Proc. Int. Therm. Spray Conf, Osaka, Japan, p61.
100. Tietz F., Buchkremer H.P., Stöver D. Components manufacturing for solid oxide fuel cells. Solid State Ionics 2002, 152-153:373-381.
101. Anderson H.U., Tietz F. Interconnect. High Temperature Solid Oxide Fuels Fundamentals, Design and Applications 2004, 179. Oxford, Elsevier. S.C. Singhal, K. Kendall (Eds.).
102. Huang Y., Dass R., Xing Z., Goodenough J.B. Double perovskites as anode materials for solid oxide fuel cells. Science 2006, 312:254-2225.