Surface composition of the steel powders pre-alloyed with manganese

Applied Surface Science

Volumn 256, Issue 12, 2010, Pages 3946-3961

  Hryha, E ^a   Gierl, C ^b   Nyborg, L ^a   Danninger, H ^b   Dudrova, E ^c  

^a CHALMERS UNIVERSITY OF TECHNOLOGY   (Sweden)

^b VIENNA UNIVERSITY OF TECHNOLOGY   (Austria)

^c INSTITUTE OF MATERIALS RESEARCH   (Slovakia)

Author keywords

Carbothermal reduction; Mass spectroscopy; PM steels; Surface oxides; Thermal analysis; XPS analysis

Indexed keywords

CARBOTHERMAL REDUCTION; CHROMIUM COMPOUNDS; IRON OXIDES; MANGANESE; MANGANESE COMPOUNDS; MASS SPECTROMETRY; METAL ANALYSIS; POWDER METALS; SCANNING ELECTRON MICROSCOPY; SILICON COMPOUNDS; SINTERING; STEEL POWDER METALLURGY; THERMOANALYSIS;

HIGH-RESOLUTION SCANNING ELECTRON MICROSCOPIES; MASS SPECTROSCOPY; PM STEELS; SINTERING CONDITION; SURFACE OXIDE; THERMODYNAMICALLY STABLE; X-RAY MICROANALYSIS; XPS ANALYSIS;

X RAY PHOTOELECTRON SPECTROSCOPY;

EID: 77649233699     PISSN: 01694332     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.apsusc.2010.01.055     Document Type: Article

References (48)

1. Šalak A., Selecka M., and Bureš R. Manganese in ferrous powder metallurgy. Powder Metall. Prog. 1 (2001) 41-58
2. Dudrova E., Kabatova M., Bidulsky R., and Wronski A. Industrial processing, microstructures and mechanical properties of Fe-(2-4)Mn-0.85Mo-(0.3-0.7)C sintered steels. Powder Metall. 47 (2004) 181-190
3. Dudrova E., Kabatova M., Bures R., Bidulsky R., Wronski A.S., and Processing. Microstructure and properties of 2-4%Mn and 0.3/0.7%C sintered steels. Kovove Mater. 43 (2005) 404-421
4. Cias A., Mitchell S.C., Watts A., and Wronski A.S. Microstructure and mechanical properties of sintered (2-4)Mn-(0.6-0.8)C steels. Powder Metall. 42 (1999) 227-233
5. Danninger H., Pöttschcher R., Bradac S., Salak A., and Seykammer J. Comparison of Mn, Cr and Mo alloyed sintered steels prepared from elemental powders. Powder Metall. 48 (2005) 23-32
6. S.C. Mitchel, The development of powder metallurgy manganese containing low-alloy steels, Ph.D. Thesis, University of Bradford, Bradford, UK, 2000.
7. E. Hryha, Fundamental study of Mn containing PM steels with alloying method of both premix and pre-alloy, Ph.D. Thesis, IMR SAS, Kosice, Slovakia, 2007.
8. Hryha E., Nyborg L., Dudrova E., and Bengtsson S. Brittleness of structural PM steels admixed with manganese studied by advanced electron microscopy and spectroscopy. Powder Metall. Prog. 8 (2008) 109-114
9. Šalak A. Sintered manganese steels, part II: manganese evaporation during sintering. Powder Metall. Int. 12 (1980) 72-75
10. Šalak A. Manganese sublimation and carbon ferromanganese liquid phase formation during sintering of premixed manganese steels. Int. J. Powder Metall. Powder Technol. 16 (1980) 369-379
11. Šalak A. Manganese vapor - protection of premixed manganese steels against oxidation during sintering. Powder Metall. Int. 18 (1986) 266-270
12. Bidulský R., Actis Grande M., Kabátová M., and Bidulská J. The effect of varying carbon content and shot peening upon fatigue performance of prealloyed sintered steels. J. Mater. Sci. Technol. 25 (2009) 607-610
13. Navara E. Alloying of sintered steels with manganese. Proc. of VIth Int. Powder Metall. Conf., Brno, CSSR, vol. 1 (1982) 143-154
14. Zapf G., Hoffmann G., and Dalal K. Effect of additional alloying elements on the properties of sintered manganese steels. Powder Metall. 18 (1975) 214-236
15. Hoffmann G., and Dalal K. Development and present situation of low alloyed PM steels using MCM and MVM master alloys. Powder Metall. Int. 11 (1979) 177-180
16. Schlieper G., and Thummler F. High strength heat-treatable sintered steels containing manganese, chromium, vanadium and molybdenum. Powder Metall. Int. 11 (1979) 172-176
17. Sainz S., Martinez V., Dougan M., Baumgaertner F., Castro F., Sinterability, and Hardenability. Mechanical properties of Mn-containing PM steels through the use of a specially designed Fe-Mn-C master alloy. Adv. Powder. Metall. Part. Mater. 2006. San Diego, USA (2006) 624-637
18. Beiss P. Alloy cost optimization of high strength Mn-Cr-Mo steels with kerosene-atomized master alloy. Adv. Powder. Metall. Part. Mater. 2006. San Diego, USA (2006) 727-735
19. Olefjord I., and Nyborg L. Surface analysis of gas atomized ferritic steel powder. Powder Metall. 28 (1985) 237-243
20. H. Karlsson, Role of surface oxides in sintering of chromium-alloyed steel powder, Ph.D. Thesis, Chalmers University of Technology, Göteborg, Sweden, 2005.
21. Karlsson H., Nyborg L., and Berg S. Surface chemical analysis of prealloyed water-atomised steel powder. Powder Metall. 48 (2005) 51-58
22. Johansson M. Expanding opportunities with chromium. Metall. Powder Rep. 54 (1999) 22-24
23. Hryha E., Dudrova E., and Bengtsson S. Influence of powder properties on compressibility of prealloyed atomised powders. Powder Metall. 51 (2008) 340-342
24. Danninger H., Gierl C., Kremel S., Leitner G., Jaenicke-Roessler K., and Yu Y. Degassing and deoxidation processes during sintering of unalloyed and alloyed PM steels. Powder Metall. Prog. 2 (2002) 125-139
25. Danninger H., Gierl C., Leitner G., and Jaenicke-Roessler K. A simple method to study the degassing and reduction processes during sintering of ferrous powder compacts. PM Sci. Technol. Briefs 6 (2004) 10-14
26. M. Jaliliziyaeian, Sintering of manganese prealloyed powder metallurgy steels, Ph.D. Thesis, TUW, Vienna, Austria, 2008.
27. Jaliliziyaeian M., Gierl C., and Danninger H. Effect of prealloyed Mn and Cr on chemical reactions during sintering of steel compacts. Adv. Powder. Metall. Part. Mater. 2008, vol. 5. Washington, USA (2008) 72-78
28. Di Castro V., and Polzonetti G. XPS study of MnO oxidation. J. Electron Spectrosc. Relat. Phenom. 48 (1989) 117-123
29. L. Nyborg, Surface reactions during atomization and consolidation of stainless steel powder, Ph.D. Thesis, Chalmers University of Technology, Göteborg, Sweden, 1987.
30. Nyborg L., Nylund A., and Olefjord I. Thickness determination of oxide layers on spherically shaped metal powders by ESCA. Proc. ff ECASIA 1987. Stuttgart, FRG (1987)
31. 2 . Appl. Surf. Sci. 6 (1980) 241-255
32. Kremel S., Danninger H., and Yu Y. Effect of sintering conditions on particle contacts and mechanical properties of PM Steels, prepared from 3% Cr prealloyed powder. Powder Metall. Prog. 2 (2002) 211-221
33. Hryha E., Nyborg L., Dudrova E., and Bengtsson S. Microstructure development during sintering of manganese alloyed PM steels. Proc. Of Euro PM 2009, EPMA, vol. 1. Copenhagen, Denmark (2009) 17-22
34. Danninger H., Nikolov D., Leitner G., and Jaenicke-Rößler K. Deoxidation processes during sintering of steel compacts prepared from pre-oxidized iron and steel powders. Proc. Int. Conf. Sintering "03". Penn State University, USA (2003)
35. Hryha E., Cajkova L., Dudrova E., and Nyborg L. Study of reduction/oxidation processes in Cr-Mo prealloyed steels during sintering by continuous atmosphere monitoring. Proc. of EURO PM 2008, EPMA, vol. 1. Mannheim, Germany (2008) 109-114
36. Bracconi P., and Nyborg L. Quantitative phase analysis and thickness measurement of surface-oxide layers in metal and alloy powders by the chemical-granular method. Appl. Surf. Sci. 133 (1998) 129-147
37. Douglass D.L., Gesmundo F., and De Asmundis C. The air oxidation of an austenitic Fe-Mn-Cr stainless steel for fusion-reactors applications. Oxid. Met. 25 (1986) 235-268
38. Ranganathan S., and Hajra J.P. Alloy oxide equilibria in the Cr-Mn-O system. Bull. Mater. Sci. 9 (1987) 149-158
39. Song S.-H., and Xiao P. An impedance spectroscopy study of oxide films formed during high temperature oxidation of an austenitic stainless steel. J. Mater. Sci. 28 (2003) 499-506
40. Naoumidis A., Schulze H.A., Jungen W., and Lersch P. Phase studies in the chromium-manganese-titanium oxide system at different oxygen partial pressures. J. Am. Ceram. Soc. 7 (1991) 55-63
41. Hansson A.H., and Somers M.A.J. Influence of the oxidation environment on the scale morphology and oxidation rate of Fe-22Cr. Mater. High Temp. 22 (2005) 179-184
42. Garcia-Vargas M.J., Lelait L., Kolarik V., Fietzek H., and Juez-Lorenzo M.M. Oxidation of Potential SOFC Interconnect Materials, Crofer 22 APU and Avesta 353 MA, in dry and humid air studied in-situ by X-ray diffraction. Mater. High Temp. 22 (2005) 245-251
43. Jung I.-H. Critical evaluation and thermodynamic modelling of the Mn-Cr-O system for the Oxidation of SOFC Interconnect. Solid State Ionics 177 (2006) 765-777
44. L. Kjellqvist, Thermodynamic description of the Fe-C-Cr-Mn-Ni-O system, Ph.D. Thesis, KTH, Stockholm, Sweden, 2009.
45. E. Hryha, E. Dudrova, L. Nyborg, S. Bengtsson, On-line control of processing atmospheres for proper sintering of oxidation-sensitive PM steels, unpublished results.
46. Cias A., Mitchell S.C., and Wronski A.S. Mechanical properties of chromium PM steel sintered in technical nitrogen. Proc. World PM 2004, EPMA, vol. 2. Vienna, Austria (2004) 7-12
47. Mitchell S.C., and Cias A. Carbothermic reduction of oxides during nitrogen sintering of manganese and chromium steels. Powder Metall. Prog. 4 (2004) 132-142
48. Danninger H., and Xu C. Degassing, reduction during sintering of high density PM steels. Proc. Euro PM 2003, EPMA, vol. 1. Valencia, Spain (2003) 261-274