Feedback control structures, embedded residual signals, and feedback control schemes with an integrated residual access

IEEE Transactions on Control Systems Technology

Volumn 18, Issue 2, 2010, Pages 352-367

  Ding, S X ^a   Yang, G ^a   Zhang, P ^b   Ding, E L ^c   Jeinsch, T ^d   Weinhold, N ^d   Schultalbers, M ^d  

^a UNIVERSITY OF DUISBURG ESSEN   (Germany)

^b BASF SE   (Germany)

^c WESTPHALIAN UNIVERSITY OF APPLIED SCIENCES   (Germany)

^d IAV GMBH   (Germany)

Author keywords

Automotive systems; Fault detection; Feedback systems; Observer; Residual generation

Indexed keywords

AUTOMOTIVE SYSTEMS; COMPUTATION CAPACITY; CONTROL LOOP; CONTROL SCHEMES; CONTROL SIGNAL; CONTROLLER STRUCTURES; ELECTRONIC CONTROL UNITS; ENGINE MANAGEMENT SYSTEMS; FAULT TOLERANT CONTROLLERS; FEEDBACK CONTROL LOOPS; FEEDBACK CONTROL STRUCTURES; FEEDBACK CONTROLLER; FEEDBACK SYSTEMS; MODEL-BASED FAULT DIAGNOSIS; REFERENCE SIGNALS; RESIDUAL GENERATION; RESIDUAL SIGNALS; YOULA PARAMETERIZATION;

ACCESS CONTROL; ELECTRONICS INDUSTRY; FAILURE ANALYSIS; FAULT DETECTION; FAULT TOLERANT COMPUTER SYSTEMS; FEEDBACK CONTROL; POWER ELECTRONICS; REMOTE CONTROL; SIGNAL DETECTION; SIGNAL PROCESSING;

CONTROLLERS;

EID: 77649188417     PISSN: 10636536     EISSN: None     Source Type: Journal    
DOI: 10.1109/TCST.2009.2018451     Document Type: Article

References (30)

1. K. J. Aström and T. Hägglung, PID Controllers: Theory, Design and Tuning. New York: ISA Press, 1995.
2. M. Blanke, M. Kinnaert, J. Lunze, and M. Staroswiecki, Diagnosis and Fault-Tolerant Control. New York: Springer-Verlag, 2003.
3. J. P. Blath, "Modelling of fuel pressure dynamics," presented at the ASIM Workshop - Modelling, Control Simulation Automotive Process Autom., Wismar, 2006.
4. J. Chen and R. Patton, Robust Model-Based Fault Diagnosis for Dynamic Systems. Norwell, MA: Kluwer, 1999.
5. S. X. Ding, Model-Based Fault Diagnosis Techniques. New York: Springer-Verlag, 2008.
6. S. X. Ding, N. Weinhold, P. Zhang, E. L. Ding, T. Jeinsch, and M. Schultalbers, "Integration of FDI functional units into embedded tracking control loops and ist application to FDI in engine control systems," in Proc. IEEE Int. Conf. Control Appl., 2005, pp. 1299-1304.
7. X. Ding, L. Guo, and P. M. Frank, "Parametrization of linear observers and its application to observer design," IEEE Trans. Autom. Control, vol. 39, no. 8, pp. 1648-1652, Aug. 1994.
8. ∞ Control Theory. New York: Springer-Verlag, 1987.
9. J. J. Gertler, Fault Detection and Diagnosis in Engineering Systems. New York: Marcel Dekker, 1998.
10. J. J. Gertler, M. Costin, X. Fang, Z. Kowalczuk, M. Kunwer, and R. Monajemy, "Model based diagnosis for automotive engines - Algorithm development and testing on a production vehicle," IEEE Trans. Control Syst. Technol., vol. 3, no. 1, pp. 61-69, Mar. 1995.
11. L. Guo, R. Friedrich, and X. Ding, "Equivalence between the output regulator and observer based state feendback controller - A general form of separation principle," 1995.
12. E. Hendricks and S. Sorenson, Mean value modelling of spark ignition engines SAE, Warrendale, PA, Tech. Rep. 900616, 1990.
13. E. Hendricks, D. Engler, and M. Fam, "A generic mean value engine model for spark ignition engines," presented at the Simulation Conf., SIMS, Lyngby, 2000.
14. R. Isermann, Mechatronic Systems. New York: Springer-Verlag, 2003.
15. R. Isermann, Fault Diagnosis Systems. New York: Springer-Verlag, 2006.
16. U. Kiencke and L. Nielsen, Automotive Control Systems, 2nd ed. New York: Springer-Verlag, 2005.
17. G. Kreisselmeier, "Two-degree-of-freedom control structure," (in German) Automatisierungstechnik, no. 6, pp. 266-269, 1999.
18. A. Marcos and G. J. Balas, "A robsut integrated controller/diagnosis aircraft application," Int. J. Robust Nonlinear Control, vol. 15, pp. 531-551, 2005.
19. C. N. Nett, C. A. Jacobson, and A. T. Miller, "An integrated approach to control and diagnostics," in Proc. ACC, 1988, pp. 824-835.
20. H. H. Niemann and J. Stoustrup, "Integration of control and detection: nominal and robust design," in Proc. IFACSymp. SAFEPROCESS, 1997, pp. 341-346.
21. H. H. Niemann and J. Stoustrup, "Fault tolerant controllers based on LTR design," in Proc. IEEE CDC, 2003, pp. 2453-2458.
22. A. O'Dwyer, Handbook of PI and PID Controller Tuning Rules, 2nd ed. London, U.K.: Imperial College Press, 2006.
23. M. Tomforde, T. Jeinsch, J. P. Blath, and H. P. Dünow, "Modelling of a fuel supply system for model-based calibration," presented at the IFAC World Congr., Seoul, Korea, 2008.
24. M. L. Tyler and M. Morari, "Optimal and robust design of integrated control and diagnostic modules," in Proc. ACC, 1994, pp. 2060-2064.
25. M. Vidyasagar, Control System Synthesis: A Factorization Approach. Cambridge, MA: The MIT Press, 1985.
26. R. Vilanova and I. Serra, "Realisation of two-degree-of-freedom compensators," IEE Proc.-Control Theory Appl., vol. 144, no. 6, pp. 589-595, 1997.
27. R. W. Weeks and J. J. Moskwa, "Transient air flow rate estimation in ntural gas engine using a nonlinear observer," presented at the SAE Int. Congr. Expo., Detroit, MI, 1994.
28. N. Weinhold, S. X. Ding, T. Jeinsch, and M. Schultalbers, "Embedded model-based fault diagnosis for on-board diagnosis of engine management systems," in Proc. IEEE CCA, 2005, pp. 1206-1211.
29. K. Zhou and J. C. Doyle, Essentials of Robust Control. Upper Saddle River, NJ: Prentice-Hall, 1998.
30. K. Zhou and Z. Ren, "A new controller architecture for high performance, robust, and fault-tolerant control," IEEE Trans. Autom. Control, vol. 46, no. 10, pp. 1613-1618, Oct. 2001.