Influence of phase morphology on the sliding wear of polyethylene blends filled with carbon nanofibers

Polymer Engineering and Science

Volumn 50, Issue 3, 2010, Pages 613-623

  Wood, Weston ^a   Li, Bin ^a   Zhong, Wei Hong ^a  

^a Washington State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CARBON NANOFIBERS; DISSOLUTION; HIGH DENSITY POLYETHYLENES; MICROSTRUCTURE; PHASE SEPARATION; WEAR RESISTANCE;

CARBON NANOFIBER COMPOSITES; CARBON NANOFIBRES; HIGH-DENSITY POLYETHYLENES; MORPHOLOGICAL ANALYSIS; PHASE MORPHOLOGY; POLYETHYLENE BLENDS; POLYETHYLENE HIGH DENSITY; SLIDING WEAR; TRIBOLOGICAL PROPERTIES; ULTRA-HIGH MOLECULAR WEIGHT POLYETHYLENES (UHMWPE);

SCANNING ELECTRON MICROSCOPY;

EID: 76949090152     PISSN: 00323888     EISSN: 15482634     Source Type: Journal    
DOI: 10.1002/pen.21549     Document Type: Article

References (43)

1. S.M. Kurtz, O.K. Muratoglu, M. Evens, and A.A. Edidin, Biomaterials, 20, 1659 (1999).
2. S.M. Kurtz, The UHMWPE Handbook: Ultra-High Molecular Weight Polyethylene for Total Joint Replacement, Elsevier Academic Press, NY (2004).
3. D.A. Baker, R.S. Hastings, and L. Pruitt, Polym. J., 41, 795 (2000).
4. R. Price, K.M. Haberstroh, and T.J. Webster, Nanotechnology, 15, 892 (2004).
5. C. Vermes, K.A. Roebuck, R. Chandrasekaran, J.G. Dobai, J.J. Jacobs, and T.T. Glant, J. Bone Miner. Res., 15, 1756 (2000).
6. M. Goldman and L. Pruitt, J. Biomed. Mater. Res., 40, 378 (1998).
7. L. Bradford, D. Baker, M.D. Ries, and L. Pruitt, Clin. Orthop. Relat. Res., 429, 68 (2004).
8. L. Bradford, R. Kurland, M. Sankaran, H. Kim, L.A. Pruitt, and M.D. Ries, J. Bone Joint Surg. [Am], 86, 1051 (2004).
9. J.P. Collier, L.S. Bargmann, B.H. Currier, M.B. Mayor, J.H. Currier, and B.C. Bargmann, Orthopedics, 21, 865 (1998).
10. B.J. Livingston, M.J. Chmell, M. Spector, and R. Poss, J. Bone Joint Surg. [Am], 79, 1529 (1997).
11. K. Yamauchi, Y. Hasegawa, S. Iwasada, S. Sakano, S. Kitamura, H. Warashina, and H. Iwata, J. Arthroplasty, 16, 463 (2001).
12. M. Visentin, S. Stea, and M. Clerico, J. Biomater. Appl., 21, 131 (2006).
13. G. Guofang, Y. Huayong, and F. Xin, Wear, 256, 88 (2004).
14. X.L. Xie, C.Y. Tang, K.Y.Y. Chan, X.C. Wu, C.P. Tsui, and C.Y. Cheung, Biomaterials, 24, 1889 (2003).
15. F. Laming, PhD Dissertation, Department of Mechanical Engineering, University of Science and Technology, Hong Kong, China (2006).
16. B.C. Anderson, P.D. Bloom, K.G. Baikerikar, V.V. Sheares, and S.K. Mallapragada, Biomaterials, 23, 1761 (2002).
17. D. Xiong, Mater. Lett., 59, 175 (2005).
18. G.A. Pryor, R.N. Villar, and N. Coleman, J. Bone Joint Surg. [Br], 74, 156 (1992).
19. T.M. Wright, C.M. Rimnac, P.M. Faris, and M. Bansal, J. Bone Joint Surg. [Am], 70, 1312 (1988).
20. Y.S. Zoo, J.W. An, D.P. Lim, and D.S. Lim, Tribol. Lett., 16, 305 (2004).
21. S.L. Ruan, P. Gao, X.G. Yang, and T.X. Yu, Polym. J., 44, 5643 (2003).
22. Y. Xue, W. Wu, and O. Jacobs, Polym. Test., 25, 221 (2006).
23. M.C. Galetz, T. Blaß, H. Ruckdäschel, J.K.W. Sandler, V. Altstädt, and U. Glatzel, J. Appl. Polym. Sci., 104, 4173 (2007).
24. G. Sui, W.H. Zhong, X. Ren, X.Q. Wang, and X.P. Yang, Mater. Chem. Phys., 115, 404 (2009).
25. K.L.K. Lim, Z.A. Mohd Ishak, U.S. Ishiaku, A.M.Y. Fuad, A.H. Yusof, T. Czigany, B. Pukanzsky, and D.S. Ogunniyi, J. Appl. Polym. Sci., 100, 3931 (2006).
26. K.L.K. Lim, Z.A. Mohd Ishak, U.S. Ishiaku, A.M.Y. Fuad, A.H. Yusof, T. Czigany, B. Pukanszky, and D.S. Ogunniyi, J. Appl. Polym. Sci., 97, 413 (2005).
27. A. Boscoletto, R. Franco, M. Scapin, and M. Tavan, Eur. Polym. J., 33, 97 (1997).
28. M.M. Dumoulin, L.A. Utracki, and J. Lara, Polym. Eng. Sci., 24, 117 (1984).
29. H. Yui, G. Wu, H. Sano, M. Sumita, and K. Kino, Polym. J., 47, 3599 (2006).
30. I. Mironi-Harpaz and M. Narkis, J. Appl. Polym. Sci., 81, 104 (2001).
31. W.A. Thongruang, M. Balik, and R.J. Spontak, J. Polym. Sci., Part B: Polym. Phys., 40, 1013 (2002).
32. S.A.R. Hashm, S.S. Neogi, A. Pandey, and N. Chand, Wear, 247, 9 (2001).
33. J. Goodrich, Polym. Eng. Sci., 7, 45 (1967).
34. I. Brough, R.N. Haward, G. Healey, and A. Wood, Polym. J., 45, 3115 (2004).
35. A. Trainor, R.N. Haward, and J.N. Hay, J. Polym. Sci., Part B: Polym. Phys., 15, 1077 (1977).
36. Y. Zhang, S. Ge, B. Tang, T. Koga, M.H. Rafailovich, J.C. Sokolov, D.G. Peiffer, Z. Li, A.J. Dias, K.O. McElrath, M.Y. Lin, S.K. Satija, S.G. Urquhart, H. Ade, and D. Nguyenet, Macromolecules, 34, 7056 (2001).
37. P. Werner, V. Altstadt, R. Jaskulka, O. Jacobs, J.K.W. Sandler, M.S.P. Shaffer, and A.H.Windle, Wear, 257, 1006 (2004).
38. Q. Wang, J. Shen, J. Xu, and Q. Xue, Wear, 209, 316 (1997).
39. J. Cayer-Barrioz, D. Mazuyer, Ph. Kapsa, A. Chateauminois, G. Robert, and F. Bouquerel, Wear, 261, 460 (2006).
40. S.M. Hosseini and T.A. Stolarski, J. Appl. Polym. Sci., 45, 2021 (1992).
41. S.S. Pesetskii, S.P. Bogdanovich, and N.K. Myshkin, J. Frict. Wear, 28, 457 (2007).
42. L.P. Glennon, T.E. Baer, J.A. Martin, W.D. Lack, and T.D. Brown, J. Biomech. Eng., 130, 1 (2008).
43. B. Derbyshire, J. Fisher, D. Dowson, C.S. Hardaker, and K. Brummitt, Wear, 181-183, 258 (1995).