Experimental investigation on corrosion and hardness of ion implanted AISI 316L stainless steel

Materials and Design

Volumn 31, Issue 6, 2010, Pages 2813-2817

  Muthukumaran, V ^a   Selladurai, V ^b   Nandhakumar, S ^b   Senthilkumar, M ^c  

^a KUMARAGURU COLLEGE OF TECHNOLOGY   (India)

^b Department of Artificial Intelligence and Machine Learning   (India)

^c PSG COLLEGE OF TECHNOLOGY   (India)

Author keywords

A. AISI 316L stainless steel; C. Ion implantation; E. Corrosion; E. Hardness

Indexed keywords

A. AISI 316L STAINLESS STEEL; AISI 316; AISI316L STAINLESS STEEL; ARTIFICIAL KNEE; BIOMEDICAL APPLICATIONS; C. ION IMPLANTATION; CHEMICAL TESTS; CORROSION PERFORMANCE; CORROSION-RESISTANT; CRYSTALLOGRAPHIC ORIENTATIONS; E. CORROSION; EXPERIMENTAL INVESTIGATIONS; HIP JOINTS; IMPLANTED SAMPLES; ION IMPLANTED; NACL SOLUTION; ROOM TEMPERATURE; SCANNING ELECTRON MICROSCOPES; TAFEL ANALYSIS; VICKERS;

CORROSION RESISTANCE; CORROSION RESISTANT ALLOYS; HARDNESS; HELIUM; ION BOMBARDMENT; ION IMPLANTATION; MEDICAL APPLICATIONS; SCANNING ELECTRON MICROSCOPY; SODIUM CHLORIDE; X RAY DIFFRACTION;

STAINLESS STEEL;

EID: 76949085274     PISSN: 02641275     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matdes.2010.01.007     Document Type: Article

References (28)

1. Chenglong L., Dazhi Y., Guoqiang L., and Min Q. Corrosion resistance and hemocompatibility of multilayered Ti/TiN-coated surgical AISI 316L stainless steel. Mater Lett 59 (2005) 3813-3819
2. 3 or NiAl in molten carbonates. J Power Sci 115 (2003) 1-11
3. 3 passivated 316L SS for implant applications. Electrochim Acta 50 (2005) 2065-2072
4. Fossati A., Borgioli F., Galvanetto E., and Bacci T. Glow-discharge nitriding of AISI 316L austenitic stainless steel: influence of treatment time. Surf Coat Technol 200 (2006) 3511-3517
5. Nakanishi T., Tsuchiyama T., Mitsuyasu H., Iwamoto T., and Takaki S. Effect of partial solution nitriding on mechanical properties and corrosion resistance in a type 316L austenitic stainless steel plate. Mater Sci Eng A 460 461 (2007) 186-194
6. Fossati A., Borgioli F., Galvanetto E., and Bacci T. Corrosion resistance properties of glow-discharge nitrided AISI 316L austenitic stainless steel in NaCl solutions. Corros Sci 48 (2006) 1513-1527
7. De Oliveira A.M., Munoz Riofano R.M., Casteletti L.C., Tremiliosi C.F., and Bento C.A.S. Effect of the temperature of plasma nitriding AISI 316L austenitic stainless steel. Rev Bras Apl Vacuo 22 (2003) 63-66
8. Jagielski J., Piatkowska A., Aubert P., Thomé L., Turos A., and Abdul Kader A. Ion implantation for surface modification of biomaterials. Surf Coat Technol 200 (2006) 6355-6361
9. Lipiński P., Bieliński D., Okrój W., Jakubowski W., Klimek L., and Jagielski J. Biomedical aspects of ion bombardment of polyethylene. Vacuum 83 (2009) 200-203
10. Rodríguez R.J., Medrano A., García J.A., Fuentes G.G., Martínez R., and Puertolas J.A. Improvement of surface mechanical properties of polymers by helium ion implantation. Surf Coat Technol 201 (2007) 8146-8149
11. Xu GC, Hibino Y, Suzuki Y, Tanihara M, Imanishi Y. Surface modification of polymers by ion implantation for biocompatible materials: relations of platelet adhesion to irradiation effects. In: Proceedings of ion implantation technology, IEEE, vol. 2. 1999. p. 1144-1147.
12. Dogan H., Findik F., and Morgul O. Friction and wear behaviour of implanted AISI 316L SS and comparison with a substrate. Mater Des 23 (2002) 605-610
13. Kamachi Mudali U., Sundararajan T., Nair K.G.M., and Dayal R.K. Nitrogen ion implantation of type 316 stainless steel to improve inter granular and pitting corrosion resistances. Corros Contr 2 (1997) 566-573
14. Levintant-Zayonts N., and Kucharski S. Surface characterization and wear behavior of ion implanted NiTi shape memory alloy. Vacuum 83 (2009) 220-223
15. Mũnoz-Castro A.E., López-Callejas R., Granda-Gutiérre E.E., Valencia-Alvarado R., Barocio S.R., Pẽna-Eguiluz R., et al. Ion implantation of oxygen and nitrogen in CpTi. Prog Org Coat 64 (2009) 259-266
16. Öztürk O. Microstructural and mechanical characterization of nitrogen ion implanted layer on 316L stainless steel. Nucl Instrum Meth Phys Res B 267 (2009) 1526-1530
17. Valenza A., Visco A.M., Torrisi L., and Camp N. Characterization of ultra-high-molecular-weight polyethylene (UHMWPE) modified by ion implantation. Polymer 45 (2004) 1707-1715
18. Johnson P.B., Gilberd P.W., Markwitz A., Trompetter W.J., Collins U.G.A., Short K.T., et al. Oxygen and hydrogen profiles in metal surfaces following plasma immersion ion implantation of helium. Surf Coat Technol 136 (2001) 217-222
19. Budzynski P., Skuratov V.A., and Kochanski T. Mechanical properties of the alloy Ti-6Al-4V irradiated with swift Kr ion. Tribol Int 42 (2009) 1067-1073
20. Sundararajan T, Kamachi Mudali U, Nair KGM, Rajeswari S, Subbaiyan M. Corrosion behaviour of nitrogen ion implanted titanium modified type 316 stainless steel in comparison with argon and oxygen ion implantations. Mater Sci Forum 1997;318-320:553-560.
21. Anandan C., William Grips V.K., Ezhil Selvi V., and Rajam K.S. Electrochemical studies of stainless steel implanted with nitrogen and oxygen by plasma immersion ion implantation. Surf Coat Technol 201 (2007) 7873-7879
22. Singh V., Marchev K., Cooper C.V., and Meletis E.I. Intensified plasma-assisted nitriding of AISI 316L stainless steel. Surf Coat Technol 160 (2002) 249-258
23. Chang C.-N., and Chen F.-S. Wear resistance evaluation of plasma nitrocarburized AISI 316L stainless steel. Mater Chem Phys 82 (2003) 281-287
24. Pramatarova L., Pecheva E., Krastev V., and Riesz F. Ion implantation modified stainless steel as a substrate for hydroxyapatite deposition. Part I Surface modification and characterization. J Mater Sci: Mater Med 18 (2007) 435-440
25. Iwaki M. Progress in ion implantation technology for metal surface treatments and other related topics. In: Proceedings of ion implantation technology, IEEE, vol. 2. 1999. p. 824-826.
26. Gil L., Bruhl S., Jimenez L., Leon O., Guevara R., and Staia MarianaH. Corrosion performance of the plasma nitrided 316L stainless steel. Surf Coat Technol 201 (2006) 4424-4429
27. Zaveri N., Mahapatra M., Deceuster A., Peng Y., Leijun L.I., and Zhou A. Corrosion resistance of pulsed laser Ti-6Al-4V implant in simulated biofluids. Electrochim Acta 53 (2008) 5022-5032
28. Guemmaz M., Moser A., Grob J.-J., and Stuck R. Sub-surface modifications induced by nitrogen ion implantation in stainless steel (SS316L). Correlation between microstructure and nanoindentation results. Surf Coat Technol 100-101 (1998) 353-357