Contamination control and failure analysis

Handbook of Lubrication and Tribology: Volume I Application and Maintenance, Second Edition

Volumn , Issue , 2006, Pages 31-1-31-58

  Stecki, Jacek ^a  

^a MONASH UNIVERSITY   (Australia)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 76749171008     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (41)

1. “ISO 16889:1999 Hydraulic Fluid Power Filters — Multi-Pass Method for Evaluating Filtration Performance of a Filter Element”, ISO, 1999.
2. “ISO 4406:1999Hydraulic Fluid Power—Fluids—Method for Coding the Level of Contamination by Solid Particles”, ISO, 1999.
3. “NAS 1638 Cleanliness Requirements of Parts used in Hydraulic Systems. National Aerospace Standard”, NAS, 1964.
4. E.C. Fitch, An Encyclopaedia of Fluid Contamination Control for Hydraulic Systems, Hemisphere Publishing Corp., Stillwater, USA, 1979.
5. L. Chao, A System Approach to Monitoring and Controlling of Contamination/Wear in Hydraulic Control Systems, PhD thesis, Monash University, Australia, 1995.
6. L. Chao and B.T. Kuhnell, “The Comparison and Development of On-lineWear & Contamination Monitors”, The Bulletin of Centre for Machine Condition Monitoring, Vol. 4, No.1, pp. 20.1–20.8, 1992.
7. C.H. Pek and J.S. Stecki, “On-Line Contamination Monitoring Using Nephelometry”, Proceedings of the 2nd InternationalMachineryMonitoring and Diagnostic Conference, pp. 121–125, Los Angeles, 1990.
8. T. Hong and J.C. Fitch,“Model of Fuzzy Logic Expert Systemfor Real-Time Condition Control of a Hydraulic System”, Proceedings of the 3rd International Conference onMachine ConditionMonitoring, Windsor, U.K., 1990.
9. L. Chao and J.S. Stecki, “Intelligent Expert Systemfor Contamination Control in Hydraulic Control Systems”, Proceedings of 6th International Conference on Industrial and Engineering Applications of Artificial Intelligence and Expert Systems, pp. 538–543, Edinburgh, June 1993.
10. J.S. Stecki and L. Chao, “Computer-Aided Techniques in Contamination Control, Design and Performance”, Eighth Bath International Fluid Power Workshop, pp. 126–140, Bath, UK, Research Studies Press & JohnWiley and Sons, ISBN 0 471 96128 0, 1996.
11. G.J. Schoenau, J.S. Stecki, and R.T. Burton, “Utilization of Artificial Neural Networks in the Control, Identification and Condition Monitoring of Hydraulic Systems — An Overview”, SAE 2000 Transactions, Vol. 109, Journal of Commercial Vehicles, Section 2, pp. 205–212, 2000.
12. J.S. Stecki and G. Schoenau, “Application of Simulation and Knowledge Processing in Contamination Control”, SAE 2000 Transactions, Vol. 109, Journal of Commercial Vehicles, Section 2, pp. 331–347, 2000.
13. “MIL-STD-1629A, The Procedures for Performing a Failure Mode, Effects and Criticality”, DOD, 1984.
14. “SAE J 1739: Potential Failure Mode and Effects Analysis FMECA Reference Manual”, SAE, 1994.
15. “ECSS-Q-30-02A Space Product Assurance — Failure Modes, Effects and Criticality Analysis (FMECA)”, European Cooperation for Space Standardization, 2001.
16. “BS5760:1991: Reliability of Systems, Equipment and Components, Part 5, Guide to FailureModes, Effects and Criticality Analysis (FMEA and FMECA)”, BS, 1991.
17. D.R. Bull, W.J. Crowther, C.R. Burrows, K.A. Edge, et al., “Approaches to Automated FMEA of Hydraulic Systems”, Proceedings of I.Mech. Congress Aerotech95, Seminar C505/9/099, Birmingham, UK, 1995.
18. W.J. Crowther, C.R. Burrows, K.A. Edge, et al., “Automated FMEA for Hydraulic Systems”, Proceedings of 12th Fluid Power Technology Colloquium, IFAS, Aachen, Germany, 1996.
19. P.G. Hawkins, R.M. Atkinson, et al., “An Approach to Failure Modes and Effects Analysis Using Multiple Models”, IFMA Proceedings, V4, Athens, Greece, June 1996.
20. D.R. Bull, J.S. Stecki, K.A. Edge, and C.R. Burrows, “Failure Modes and Effects Analysis of a Valve- Controlled Hydrostatic Drive”, in Fluid Power Engineering: Challenges and Solutions, Tenth Bath International Fluid PowerWorkshop, Research Studies Press Ltd., pp. 131–143, 1997.
21. C.E. Peleaz and J.B. Bowles,“Using Fuzzy CognitiveMaps as aModel for FailureModes and Effects Analysis”, Information Sciences, Vol. 88, pp. 177–199, 1996.
22. J.S. Stecki, F. Conrad, and B. Oh, “Software Tool for Automated Failure Modes and Effects Analysis (FMEA) of Hydraulic Systems”, Fifth JFPS International Symposium on Fluid Power, Nara, Japan, 2002.
23. J.S. Stecki, “Maintenance Aware Design (MAD) Methodology”, The Eighth Scandinavian International Conference on Fluid Power, SICFP’03, May 7–9, Tampere, Finland, 2003.
24. J.S. Stecki and B. Oh, “Failure Analysis Using Energy Disturbance and IA Techniques”, The Eighth Scandinavian International Conference on Fluid Power, SICFP’03, May 7–9, Tampere, Finland, 2003.
25. G. Pahl and W. Beitz, Engineering Design: A Systematic Approach, Springer-Verlag, Berlin, 1988.
26. L.D. Miles, Techniques of Value Analysis and Engineering, McGraw-Hill, New York, 1972.
27. “ECSS-E-10 Space Engineering — Functional Analysis”, European Cooperation for Space Standardization, 1999.
28. H. Czichos, Tribology. A System Approach to the Science and Technology of Friction, Lubrication andWear, Tribology Series 1, Elsevier, New York, 1978.
29. D. Godfrey, Wear Control Handbook, ASME Publication, 1980.
30. R.K. Tessman and E.C. Fitch, “Field Contaminant Ingression Rates — How Much?” Proceedings of Eighth Annual Fluid Power Research Conference, paper 47-74, 1974.
31. L.E. Bensch and W.T. Bonner,“Field SystemContaminants—Where, What, HowMuch”, Proceedings of Seventh Annual Fluid Power Research Conference, paper P73-CC-1, pp. 187–193, 1973.
32. W. Backé, “Wear Sensitivity of Hydraulic Displacement Units to Solid Contaminats”, Ölhydraulik und Pneumatik, Vol. 33, No. 6, pp. 29–38, 1989.
33. R.K. Tessman, “Speed is not a Factor in the ContaminantWear of Hydraulic Pumps”, BFPR J., paper 8, pp. 1–11, 1979.
34. G. Silva, “Wear Generation in Hydraulic Pumps”, SAE Technical Paper, 9011679, 1990.
35. R.K. Tessman, “Component Contaminant Generation”, Proceedings of Eighth Annual Fluid Power Research Conference, paper 46-74, 1974.
36. J. Collins and B. Hagan, The Failure-Experience Matrix: A Useful Design Tool, ASME Journal of Engineering for Industry 1976.
37. J. Collins, Failure of Materials in Mechanical Design: Analysis, Prediction, Prevention. Wiley Interscience, 1993.
38. B.T. Kuhnell and J.S. Stecki, “Monitoring of Hydraulic System”, Proceedings of 2nd International Fluid Power Conference, pp. 729–734, Hanghzou, China, March 1989.
39. L. Chao, J.S. Stecki, and P. Dransfield, “Dynamic Contamination ControlModel for Fluid Contamination”, Proceedings of International Conference on Fluid Power Control and Robotics, pp. 247–342, Chengdu, China, 1990.
40. J.S. Stecki and L. Chao, “Simulation of Contamination Control Systems”, The Bulletin of Centre for Machine Condition Monitoring, Vol. 2, No. 1, pp. 1–6 1990.
41. J.S. Stecki and M. Grahl-Madsen, “Distribution of Particulate Contamination in Multi-branch Hydraulic System”, The Sixth Scandinavian International Conference on Fluid Power, SICFP’99, May 26–28, Tampere, Finland, 1999.