Fatigue crack growth with simulation in components random defects

Journal of ASTM International

Volumn 6, Issue 9, 2009, Pages

  Shirani, M ^a   Harkegard G ^a  

^a NORWEGIAN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Norway)

Author keywords

Casting defects; Fatigue; Fatigue assessment postprocessor; Spheroidal graphite cast iron; X ray computed tomography

Indexed keywords

CASTING DEFECT; FATIGUE ASSESSMENTS; POST-PROCESSOR; SPHEROIDAL GRAPHITE CAST IRON; X-RAY COMPUTED TOMOGRAPHY;

COMPUTERIZED TOMOGRAPHY; CRACKS; FATIGUE CRACK PROPAGATION; FATIGUE OF MATERIALS; GRAPHITE; SCANNING;

CAST IRON;

EID: 76749103959     PISSN: None     EISSN: 1546962X     Source Type: Journal    
DOI: 10.1520/JAI102542     Document Type: Article

References (25)

1. Clement, P., Angeli, J. P., and Pineau, A., "Short Crack Behavior in Nodular Cast Iron," Fatigue Fract. Eng. Mater. Struct., Vol.7, 1984, pp. 251-265.
2. Palin-Luc, T. A., Lasserre, S. A., and Berard, J.-Y. B., "Experimental Investigation on the Significance of the Conventional Endurance Limit of a Spheroidal Graphite Cast Iron," Fatigue Fract. Eng. Mater. Struct., Vol.21, 1998, pp. 191-200.
3. Nadot, Y., Méndez, J., and Ranganathian, N., "Fatigue Life Assessment of Nodular Cast Iron Containing Casting Defects," Fatigue Fract. Eng. Mater. Struct., Vol.22, 1999, pp. 289-300.
4. [4] Tokaji, K. and Ogawa, T., "Fatigue Life Distribution and Its Simulation in Spheroidal Graphite Cast Irons," Mater. Sci Res. Int., Vol.2, 1996, pp. 39-45. (Pubitemid 126554041)
5. [5] Yaacoub Agha, H., Agha, A., Béranger, S., Billardon, R., and Hild, F., "High-Cycle Fatigue Behavior of Spheroidal Graphite Cast Iron," Fatigue Fract. Eng. Mater. Struct., Vol.21, 1998, pp. 287-296. (Pubitemid 128498639)
6. Ting, J. C. and Lawrence, F. V., Jr., "Modelling the Long Life Fatigue Behavior of Cast Aluminium Alloy," Fatigue Fract. Eng. Mater. Struct., Vol.16, 1993, pp. 631-647.
7. [7] Skallerud, B., Iveland, T., and Härkegård, G., "Fatigue Life Assessment of Aluminium Alloys with Casting Defects," Eng. Fract. Mech., Vol.44, 1993, pp. 857-874. (Pubitemid 23658564)
8. Couper, M. J., Neeson, A. E., and Griffiths, J. R., "Casting Defects and the Fatigue Behavior of an Aluminium Casting Alloy," Fatigue Fract. Eng. Mater. Struct., Vol.13, 1990, pp. 213-227.
9. Murakami, Y., Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions, Yokendo, Tokyo, 1993.
10. Shi, G., Atkinson, H. V., Sellars, C. M., and Anderson, C. W., "Application of the Generalized Pareto Distribution to the Estimation of the Size of the Maximum Inclusion in Clean Steels," Acta Mater., Vol.47, 1999, pp. 1455-1468.
11. Zhou, S., Murakami, Y., Beretta, S., and Fukushima, Y., "Experimental Investigation on Statistics of Extremes for Three-Dimensional Distribution of Non-Metallic Inclusions," Mater. Sci Technol., Vol.18, 2002, pp. 1535-1543.
12. [12] Lee, P. D., Chirazi, A., Atwood, R. C., and Wang, W., "Multiscale Modelling of Solidification Microstructures, Including Microsegregation and Microporosity, in an Al-Si-Cu Alloy," Mater. Sci Eng., A, Vol.365, 2004, pp. 57-65. (Pubitemid 38005813)
13. [13] Buffiere, J.-Y., Savelli, S., Jouneau, P. H., Maire, E., and Fougères, R., "Experimental Study of Porosity and Its Relation to Fatigue Mechanisms of Model Al-Si7-Mg0.3 Cast Al Alloys," Mater. Sci Eng., A, Vol.316, 2001, pp. 115-126. (Pubitemid 32914336)
14. Marrow, T. J., Buffiere, J.-Y., Withers, P. J., Johnson, G., and Engelberg, D., "High Resolution X-ray Tomography of Short Fatigue Crack Nucleation in Austempered Ductile Cast Iron," Int. J. Fatigue, Vol.26, 2004, pp. 717-725.
15. Verdu, C., Adrien, J., and Buffiere, J. Y., "Three-Dimensional Shape of the Early Stages of Fatigue Cracks Nucleated in Nodular Cast Iron," Mater. Sci Eng., A, Vol.483-484, 2008, pp. 402-405.
16. [16] Masad, E., Jandhyala, V. K., Dasgupta, N., Somadevan, N., and Shashidhar, N., "Characterization of Air Void Distribution in Asphalt Mixes Using X-ray Computed Tomography," J. Mater. Civ. Eng., Vol.14, 2002, pp. 122-129. (Pubitemid 34412400)
17. VGStudio MAX 1.2 (2004), Volume Graphics GmbH, D-69123 Heidelberg, Germany, http://www.volumegraphics.com last accessed Sept. 1, 2009.
18. [18] Wormsen, A., Fjeldstad, A., and Härkegard, G., "A Post-Processor for Fatigue Crack Growth Analysis Based a Finite Element Stress Field," Comput. Methods Appl Mech. Eng., Vol.197, 2008, pp. 834-845. (Pubitemid 350091306)
19. Fett, T. and Munz, D., "Stress Intensity Factors and Weight Functions," International Series on Advances in Fracture, Computational Mechanics Publications, Southampton, 1997.
20. Coles, S., An Introduction to Statistical Modeling of Extreme Values, 3rd ed., Springer Series in Statistics, London, 2001.
21. Anderson, C. W. and Coles, S. G., "The Largest Inclusions in a Piece of Steel," Extremes, Vol.5, 2002, pp. 237-252.
22. [22] Anderson, C. W., de Mare', J., and Rootzen, H., "Methods for Estimating the Sizes of Large Inclusions in Clean Steels," Acta Mater., Vol.53, 2005, pp. 2295-2304. (Pubitemid 40467388)
23. Kitagawa, H. and Takahashi, S., "Applicability of Fracture Mechanics to Very Small Cracks or the Cracks in Early Stage," Proceedings of the Second International Conference on the Mechanical Behavior of Materials, Boston, MA, 1976, ASM, Metals Park, OH, pp. 627-631.
24. Fjeldstad, A., Härkegård, G., and Wormsen, A., "The Influence of a Stress Gradient on the Growth of a Fatigue Crack," 9th International Fatigue Congress, Atlanta, GA, 2006.
25. EN1563:1997, 1997, "Founding-Spheroidal Graphite Cast Irons," European Committee for Standardization.