Value-based polymer precursors from paper waste and its application in polyurethane foams

Journal of Cellular Plastics

Volumn 46, Issue 1, 2010, Pages 15-30

  Mishra, Deepak ^a   Sinha, Vijay Kumar ^a  

^a V P AND R P T P SCIENCE COLLEGE   (India)

Author keywords

Cellulose; Deinking; Paper waste; Polymer precursors; Renewable resource.

Indexed keywords

ACID VALUE; CASTOR OIL; CHEMICALLY MODIFIED; DARK COLORS; DEINKING PAPERS; ENVIRONMENTAL CONCERNS; LOW VISCOSITY; MOISTURE CONTENTS; NON-VOLATILE; PAPER WASTE; PAPER WASTES; PETROLEUM RESOURCES; PHYSICOCHEMICAL ANALYSIS; POLYMER PRECURSORS; POLYMERIC MATERIAL; POLYMERIC PRECURSORS; POLYOLS; POLYURETHANE FOAM; RENEWABLE RESOURCE; SCANNING ELECTRON MICROGRAPHS; VALUE-BASED;

ANODIC OXIDATION; CELLULOSE; CHROMATOGRAPHIC ANALYSIS; DEVELOPING COUNTRIES; FOURIER TRANSFORM INFRARED SPECTROSCOPY; HIGH PERFORMANCE LIQUID CHROMATOGRAPHY; PETROLEUM DEPOSITS; RENEWABLE ENERGY RESOURCES; RIGID FOAMED PLASTICS; SCANNING ELECTRON MICROSCOPY; SURFACE TREATMENT; SYNTHESIS (CHEMICAL); THERMOGRAVIMETRIC ANALYSIS; VEGETABLE OILS;

DEINKING;

CELLULOSE; CHROMATOGRAPHY; DEINKING; DEVELOPING COUNTRIES; GRAVIMETRY; OXIDATION; PLASTICS; POLYMERS; RENEWABLE RESOURCES; SCANNING ELECTRON MICROSCOPY; SURFACE TREATMENT; SYNTHESIS; WASTE PAPERS;

EID: 76649088307     PISSN: 0021955X     EISSN: 15307999     Source Type: Journal    
DOI: 10.1177/0021955X09347764     Document Type: Article

References (23)

1. Lligadas, G., Ronda, J.C., Galia, M., Biermann, U. and Metzger, J.O. Synthesis and Characterization of Polyurethanes from Epoxidized Methyl Oleate Based Polyether Polyols as Renewable Resources, J. Poly. Sci. Part-A, 2005: 44: 634-645.
2. Gandini, A. and Belgacem, M.N. Recent Contributions to the Preparation of Polymers Derived from Renewable Resources, J. Polymer. Environ., 2002: 10: 105-114.
3. Liang, L., Mao, Z., Li, Y. et al. Liquefaction of Crop Residue for Polyols, Bioresources, 2006: 1: 248-256.
4. Yu, F., Liu, Y., Pan, X. et al. Liquefaction of Corn Stover and Preparation of Polyester from the Liquefied Polyol, Appl. Biochem. Biotechnol., 2006: 130: 574-585.
5. Patel, J.V., Soni, P.K. and Sinha, V.K. Isocyanate Adduct Based Two Pack PU Coatings from Biological Materials, J. Sci. Ind. Res., 1999: 58: 579-585.
6. Mun, S.P., Gilmour, I.A. and Jordan, P.J. Effect of Organic Sulfonic Acids as Catalysts During Phenol Liquefaction of Pinus Radiata Bark, J. Ind. Eng. Chem., 2006: 12: 720-726.
7. Krzan, A., Kunaver, M. and Tisler, V. Wood Liquefaction Using Dibasic Organic Acids and Glycols, Acta. Chim. Slov., 2005: 52: 253-258.
8. Schilling, C.H., Tomasik, P., Karpovich, D.S., Hart, B., Garcha, J. and Boettcher, P.T. Preliminary Studies on Converting Agricultural Waste into Biodegradable Plastics - Part III: Sawdust, J. Poly. Envt., 2005: 13: 177-183. (Pubitemid 40875928)
9. Narine, S.S., Kong, X., Bouzidi, L. and Sporns, P. Physical Properties of Polyurethanes Produced From Polyols from Seed Oils: I. Elastomers, J. Am. Oil. Chem. Soc., 2007: 84: 55-63. (Pubitemid 46931892)
10. Stirna, U., Sevastyanova, I., Misane, M., Cabulis, U. and Beverte, I. Structure and Properties of Polyurethane Foams Obtained from Rape seed Oil Polyols, Proc. Estonian. Acad. Sci. Chem., 2006: 55: 101-110.
11. Kazragis, K. Minimization of Atmospheric Pollution by Utilizing Cellulosic Waste, J. Environ. Eng. Landsc. Manag., 2005: 13: 81-90.
12. Tucker, P., Douglas, P. and Polson, J. (2004). Mass Balance of UK Newspapers: Biffaward Report, University of Paisley, Paisley, UK.
13. PIRA. (2003). Available at: http://www.pira.co.uk/ Accessed March 23, 2009.
14. Benkering, P. and Duraiappah, A. (1998). The Economic and Environmental Impacts of the Waste Paper Trade and Recycling in India: A Material Balance Approach, CREED Working Paper Series No. 10. IIED, London and Institute for Environmental Studies, Amsterdam.
15. Duckett, E.J. Improving the Profitability of Wastepaper Dealerships: An Application of Price Forecasting and Management Simulation, Resour. Recov. Conserv., 1978: 3: 217-236.
16. Casey, J.P. (1960). Pulp and Paper Chemistry and Chemical Technology, London, Interscience, pp. 379-391.
17. Hu, Y.H., Gao, Y., Wang, D.N. et al. Rigid Polyurethane Foam Prepared from Rape Seed Oil Based Polyol, J. Appl. Polym. Sci., 2002: 84: 591-597.
18. Narine, S.S., Yue, J. and Kong, X. Production of Polyols From Canola Oil and their Chemical Identification and Physical Properties, J. Am. Oil Chem. Soc., 2002: 84: 173-179.
19. Desai, S.D., Patel, J.V. and Sinha, V.K. Polyurethane Adhesive System from Biomaterial-based Polyol for Bonding Wood, Int. J. Adhesion Adhesives, 2003: 23: 393-399.
20. Szycher, M. (1999). Szychers Handbook of Polyurethanes, Boca Raton, CRC Press.
21. Hendrikse, P.W. and Harwood, J.L. (1986). Analytical Methods, In: Gunstone, F.D., Harwood, J.L. and Padley, F.B. (eds), The Lipid Handbook, London, Chapman Hill, pp. 249-269.
22. Soni, P.K. (2000). Synthesis and Characterization of Polyurethane from Different Polyols and Its Applications as Coating, PhD Thesis, Vallabh Vidyanagar, Sardar Patel University, Gujarat, India.
23. Seo, W.J., Jung, H.C., Hyun, J.C. et al. Mechanical, Morphological, and Thermal Properties of Rigid Polyurethane Foams Blown by Distilled Water, J. Appl. Polym. Sci., 2003: 90: 12-21.