Adhesive wear behaviour of cast aluminium-silicon alloys: Overview

Materials and Design

Volumn 31, Issue 5, 2010, Pages 2517-2531

  Dwivedi, D K ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY ROORKEE   (India)

Author keywords

Adhesive wear; Al Si alloys; Materials properties; Sliding conditions; Wear debris and sub surface damage; Wear mechanisms

Indexed keywords

ADHESIVE WEARS; AL-SI ALLOY; AL-SI ALLOYS; SLIDING CONDITIONS; SUB-SURFACE DAMAGE; WEAR DEBRIS; WEAR MECHANISMS;

ALUMINUM; DEBRIS; MECHANICAL PROPERTIES; SILICON; SURFACE PROPERTIES; TRIBOLOGY; WEAR OF MATERIALS;

SILICON ALLOYS;

EID: 76549108763     PISSN: 02641275     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matdes.2009.11.038     Document Type: Article

References (67)

1. ASM Hand book, Selection and properties of non-ferrous materials, vol. 2. Ohio: ASM International, Metal Park; 1989. p. 1223-40.
2. Prasad B.K. Engineering materials (1989), TMH, Bombay p. 20-50
3. Dwivedi D.K., Sharma A., and Rajan T.V. Methods to improve the structure and properties of cast Al-Si alloys. Ind Foundry J 46 12 (2000) 31-39 [December]
4. Sivaramakrishnan C.S., Mahanti R.K., and Kumar R. Stir cast morphology of aluminum-silicon alloys. Aluminum 57 12 (1981) 820-821
5. Kashyap KT, Murali S, Raman KS, Murthy KSS. Casting and heat treatment variables of AI-7Si-Mg alloy. Material Science and Technology 1993;9:189-203.
6. Joy V.A., Basu K.I., Krishanandan Nair C.G., and Sheshan S. High strength Al-Si alloys through Sr modification. Met Miner Mater 1 (1989) 113-122
7. Murali S., Muthukaruppan S., Raman K.S., and Murthy K.S.S. Stir cast and extrude Al-7Si-0.3Mg alloy containing iron and berylium. Mater Sci Technol 13 (1997) 337-342
8. Dwivedi DK, Sharma Ashok, Rajan TV. Influence of 5/1 Ti-B-Al and strontium on cast eutectic Al-Si base alloy. In: Proceedings of Indian Foundry Congress, Delhi; w.e.f.February16-18 2000. p. 103-8.
9. Prasad B.K. Structure-property related changes in hypoeutectic Al-Si alloys induced by solutionizing. Mater Trans JIM 34 12 (1994) 873-878
10. Dwivedi D.K., Sharma A., and Rajan T.V. Friction and wear behaviour of hypereutectic Al-Si base Alloys at low sliding velocities. Trans Ind Inst Met 54 6 (2001) 247-254
11. Mahanti R.K., Lal K., Sinha A.N., and Shivaramakrishanan C.S. A novel technique for hyper eutectic aluminium-silicon alloy melt treatment. Mater Trans JIM 34 12 (1993) 1207-1211
12. Dhiman M., Dwivedi D.K., Sehgal R., and Bhatta I.K. Effect of iron (wt.%) on adhesive wear response of Al-12Si-1Cu-0.1Mg alloy in dry sliding conditions. Trans Ind Inst Met (Int J) 61 6 (2008) 451-456
13. Carenas Hector, Martinez Enrique, Haro Sergio, Dwivedi DK. Effect of pouring temperature on microstructure, porosity and mechanical properties of cast Al alloys. In: Proceeding of international materials research congress on materials characterization held in Cancun, Mexico; October 28-November 1 2007.
14. Wang L., Makhlouf M., and Apelian D. Aluminium die casting alloys: alloy composition, microstructure, and properties-performance relationships. Int Mater Rev 40 6 (1995) 221-223
15. Avner S.D. An introduction to physical metallurgy (1999), Mc Graw Hill, London
16. Dwivedi D.K., Arjun T.S., Thakur P., Vaidya H., and Singh K. Sliding wear and friction behaviour of Al-18%Si-0.5%Mg alloy. Mater Process Technol 152 3 (2004) 323-328
17. Mondolfo L.F. Aluminium alloys: structure and properties (1979), Butter Worth, England p. 759-75
18. Hatch J.E. Aluminium: structure and physical metallurgy (1998), ASM International, Metal Park, Ohio p. 150-60
19. ASM Handbook. Friction, wear and lubrication. Ohio: ASM International, Metal Park; 1989. p. 785-91.
20. Sarkar A.D., and Clarck J. Wear characteristics, friction and surface topography observed in the dry sliding of as-cast and age hardening Al-Si alloys. Wear 75 1 (1982) 71-85
21. Yust C.S. Tribology and wear. Int Met Rev 30 3 (1985) 141-154
22. Rabinowitcz E. Friction, wear and lubrication (1965), John Wiley and Sons, New York p. 70-118
23. Razavizadeh K., and Eyre T.S. Oxidative wear of aluminium alloys. Wear 79 3 (1982) 325-333
24. Mohammeda Jasim K., and Dwarkadas E.S. Wear in Al-Si alloys under dry sliding conditions. Wear 119 1 (1987) 119-130
25. Das S., Prasad S.V., and Ramchandran T.R. Microstructure and wear of cast (Al-Si alloy)-graphite composites. Wear 133 1 (1989) 173-187
26. Clegg A.J., and Das A.A. Wear of a hypereutectic aluminium-silicon alloy. Wear 43 3 (1977) 367-373
27. Dwivedi D.K. Transitions in wear-friction behaviour under dry sliding conditions of cast Al-Si base alloys. Inst Eng (India) 82 (2001) 69-74
28. Rohatgi P.K., Ray S., and Liu Y. Tribological properties of metal matrix graphite particle composites. Int Mater Rev 37 3 (1992) 129-150
29. Sharma Ashok. Production and properties of cast Al-Si-Pb composites. PhD thesis, Univ. of Rajasthan, Jaipur, India; 1991. p. 20-45.
30. Madakson P.B. The frictional behaviour of materials. Wear 87 (1983) 191-206
31. Kennedy F.E. Thermal and thermo-mechanical effect in dry sliding. Wear 100 (1984) 453-476
32. Rigney D.A. Comments on the sliding wear of metals. Tribol Int 30 5 (1997) 361-367
33. Mahdavian S.M., Mai Y.W., and Cottrell B. Friction metallic transfer and debris analysis of sliding surfaces. Wear 82 2 (1982) 221-232
34. Sarkar A.D., and Clarcke J. The role of transfer and back transfer of metals in the wear of binary Al-Si alloys. Wear 82 2 (1982) 179-195
35. Rabinowitz E. The least wear. Wear 100 1-3 (1984) 533-541
36. Pramila Bai B.N., and Biswas S.K. Characterization of dry sliding wear of Al-Si alloys. Wear 120 1 (1987) 61-74
37. Pearsall K.J. The effect of sliding time and speed on the wear of composite materials. Wear 63 1 (1980) 121-130
38. Saka N., Eleiche A.M., and Suh N.P. Wear of metals at high sliding speeds. Wear 44 1 (1977) 109-125
39. Davis F.A., and Eyre T.S. The effect of silicon content and morphology on the wear of aluminium-silicon Alloys under dry and lubricated sliding conditions. Tribol Int 27 3 (1994) 171-181
40. Subramanian C. Proceeding of international conference on aluminium-85, vol. 3. New Delhi, India; 1985. p. 287-95.
41. Rigney D.A., Chen L.H., and Naytor M.G.S. Wear processes in sliding systems. Wear 100 1-3 (1984) 195-219
42. Sarkar A.D., and Clarcke J. Friction and wear of aluminium-silicon alloys. Wear 61 1 (1980) 157-167
43. Dee A.W.J. A note on the relation between friction and wear. Wear 65 3 (1981) 397-398
44. Sarkar A.D. Wear of metals (1976), Pergman Press, England p. 50-160
45. Prasad B.K., Venkateswarlu K., Modi O.P., Jha A.K., Dasgupta R., and Yegneswaran A.H. Metall Mater Trans A 29A (1998) 2747-2752
46. Perrin C., and Rainforth W.M. Work hardening behaviour at the worn surface of Al-Cu and Al-Si alloys. Wear 203-204 (1997) 171-179
47. Li X.Y., and Tandan K.N. Subsurface microstructures generated by dry sliding wear on as-cast and heat treated Al metal matrix composites. Wear 203-204 (1997) 703-708
48. Lingaurd S., Fu K.H., and Chueng K.H. Some observations on the wear of aluminium rubbing on steel. Wear 96 1 (1984) 75-84
49. Yaseen R.S., and Dwarkdas E.S. Wear of aluminium under dry sliding conditions. Wear 84 3 (1983) 372-377
50. Sarkar A.D., and Clacke J. Wear characteristics of as-cast binary aluminium-silicon alloys. Wear 54 1 (1979) 7-16
51. Spurr R.T. Temperatures reached during sliding. Wear 55 2 (1979) 283-293
52. Subramanain C. Effects of sliding speed on the unlubricated wear behaviour of Al-12.3wt.%Si alloy. Wear 151 1 (1991) 97-110
53. Lim S.C., and Ashby M.F. Wear mechanism maps. Acta Metall 35 1 (1987) 1-24
54. Razavizadeh K., and Eyre T.S. Oxidative wear of aluminium alloys: part II. Wear 87 3 (1983) 261-271
55. Kharagpur IIT. Proceeding of short term course on development of wear resistant materials; 1989. p. 10-30.
56. Rice S.L. The role of microstructure in the impact wear of two aluminum alloys. Wear 54 2 (1979) 291-301
57. Jasim K.M. Nature of subsurface damage in Al-22wt.%Si alloys sliding dry on steel discs at high sliding speeds. Wear 98 (1984) 183-197
58. Dwivedi D.K., Sharma A., and Rajan T.V. Friction and wear behaviour of cast Al-Si base alloys. Ind Foundry J 47 1 (2001) 18-22
59. Gibson P.R., Clegg A.J., and Das A.A. Wear of cast Al-Si alloys containing graphite. Wear 95 2 (1984) 192-200
60. Iwai Y., Hou W., Honda T., and Youda H. Wear behaviour of high tensile strength aluminium alloys under dry and lubricated conditions. Wear 196 1-2 (1996) 46-53
61. Pramila Bai B.N., Dwarkadas E.S., and Biswas S.K. Subsurface damage in dry wear of Al-Si alloys. Wear 71 3 (1981) 381-384
62. Pramila Bai B.N., Biswas S.K., and Kumtekar N.N. Scanning electron microscopy study of worn Al-Si alloy surfaces. Wear 87 3 (1983) 237-249
63. Balu P.J., and Doyle E.D. Metallographic evidence for the nucleation of subsurface microcracks during unlubricated sliding of metals. Wear 117 3 (1987) 381-387
64. L Rice S., Nowotny H., and Wanye S.F. Characteristics of metallic subsurface zones in sliding and impact wear. Wear 74 1 (1981) 131-142
65. Barewell F.T. The contribution of particle analysis to the study of wear of metals. Wear 90 1 (1983) 167-181
66. Satnam N. Effect of wear debris on wear in rolling-sliding motion. Wear 90 2 (1983) 261-267
67. Suh N.P. An overview of the delamination theory of wear. Wear 44 1 (1977) 1-16