Full-scale experiment on foam bitumen pavements in an accelerated testing facility

Transportation Research Record

Volumn , Issue 2094, 2009, Pages 21-29

  Gonzalez, Alvaro ^a   Cubrinovski, Misko ^a   Pidwerbesky, Bryan ^b   Alabaster, David ^c  

^a UNIVERSITY OF CANTERBURY   (New Zealand)

^b FULTON HOGAN LTD   (New Zealand)

^c New Zealand Transport Agency   (New Zealand)

Author keywords

[No Author keywords available]

Indexed keywords

BITUMINOUS MATERIALS; CEMENTS; MATERIALS TESTING; STRAIN; TENSILE STRENGTH;

ACCELERATED PAVEMENT TESTING; ACCELERATED TESTING; AGGREGATE CONSUMPTION; BITUMEN STABILIZATION; CONTROL SECTIONS; FOAM BITUMENS; FULL-SCALE EXPERIMENT; INDIRECT TENSILE STRENGTH; NEW ZEALAND; TESTING FACILITY;

PAVEMENTS;

EID: 76149090475     PISSN: 03611981     EISSN: None     Source Type: Journal    
DOI: 10.3141/2094-03     Document Type: Article

References (24)

1. Compton, J. The Dawn of a New Stone Age for Auckland. In NZGS Geotechnical Symposium. New Zealand Geotechnical Society, Auckland, 1998.
2. Thenoux, G., A. Gonzalez, and R. Dowling. Energy Consumption Comparison for Different Asphalt Pavements Rehabilitation Techniques Used in Chile. Resources, Conservation, and Recycling, Vol.49, No.4, Feb. 2007, pp. 325-339.
3. Jenkins, K. J. Analysis of a Pavement Layer Which Has Been Treated by Single Pass In Situ Stabilisation. University of Natal, South Africa, 1994.
4. Jenkins, K. J. Mix Design Considerations for Cold and Half-Warm Bituminous Mixes with Emphasis on Foamed Bitumen. PhD thesis. University of Stellenbosch, South Africa, 1999.
5. Kim, Y., H. Lee, and M. Heitzman. Validation of a New Mix Design Procedure for Cold In-Place Recycling with Foamed Asphalt. Journal of Materials in Civil Engineering, Vol.19, No.11, 2007.
6. Jenkins, K. J., F. M. Long, and L. J. Ebels. Foamed Bitumen Mixes ? Shear Performance? International Journal of Pavement Engineering, Vol.8, 2007, pp. 85-98.
7. Long, F., H. L. Theyse, S. Robroch, and J. Liebenberg. Performance Models for Deep In Situ Recycled, Bitumen Stabilised Pavements under Accelerated Traffic. Proc., Ninth International Conference on Asphalt Pavements, International Society for Asphalt Pavements, Copenhagen, Denmark, 2002.
8. Brosseaud, Y., J.-C. Gramsammer, J.-P. Kerzreho, H. Goacolou, and F. Le Bourlot. Experimentation de la Grave-Mousse Sur le Manège de Fatigue. Extrait de la Revue Générale des Routes RGRA, No.752, 1997.
9. Romanoschi, S. A., M. Hossain, A. Gisi, and M. Heitzman. Accelerated Pavement Testing Evaluation of the Structural Contribution of Full- Depth Reclamation Material Stabilized with Foamed Asphalt. In Transportation Research Record: Journal of the Transportation Research Board, No.1896, Transportation Research Board of the National Academies, Washington, D.C., 2004, pp. 199-207.
10. Loizos, A., and V. Papavasiliou. Evaluation of Foamed Asphalt Cold In- Place Pavement Recycling Using Non-Destructive Techniques. Journal of Transportation Engineering, Vol.132, No.12, 2006, pp. 970-978.
11. Interim Technical Guidelines (TG2): The Design and Use of Foamed Bitumen Treated Materials. Asphalt Academy, Pretoria, 2002.
12. Austroads. Pavement Design: A Guide to the Structural Design of Road Pavements. New Zealand Supplement. Sydney, Australia, 2005.
13. Pidwerbesky, B. D. Accelerated Dynamic Loading of Flexible Pavements at the Canterbury Accelerated Pavement Testing Indoor Facility. In Transportation Research Record 1482, TRB, National Research Council, Washington, D.C., 1995, pp. 79-86.
14. Dawson, A. The E-mu System Users Manual, 2nd ed. University of Nottingham, Nottingham, United Kingdom, 1994.
15. Steven, B. The Development and Verification of a Pavement Response and Performance Model for Unbound Granular Pavements. PhD thesis. University of Canterbury, Christchurch, New Zealand, 2005.
16. Transit New Zealand Specification TNZ T/15. Draft report. Transit New Zealand, Wellington, 2007.
17. Bituminous Mixtures. Test Methods for Hot Mix Asphalt. Soluble Binder Content. British Standards Institution, London, 2005.
18. Ruckel, P. J., S. M. Acott, and R. H. Bowering. Foamed-Asphalt Paving Mixtures: Preparation of Design Mixes and Treatment of Test Specimens. In Transportation Research Record 911, TRB, National Research Council, Washington, D.C., 1983, pp. 88-95.
19. Kim, Y., and H. Lee. Development of Mix Design Procedure for Cold- In Place Recycling with Foamed Asphalt. Journal of Materials in Civil Engineering, Vol.18, No.1, 2006.
20. Nataatmadja, A. Some Characteristics of Foamed Bitumen Mixes. In Transportation Research Record: Journal of the Transportation Research Board, No.1767, TRB, National Research Council, Washington, D.C., 2001, pp. 120-125.
21. Saleh, M. F. New Zealand Experience with Foam Bitumen Stabilization. In Transportation Research Record: Journal of the Transportation Research Board, No.1868, Transportation Research Board of the National Academies, Washington, D.C., 2004, pp. 40-49.
22. Long, F., and D. G. C. Ventura. Laboratory Testing for the HVS Test Sections on the N7 (TR11/1). CSIR Transportek Report No. CR-2003/56. Council for Scientific and Industrial Research, Pretoria, South Africa, 2004.
23. Frobel, T., and J. Hallet. Foamed Bitumen Stabilisation in New Zealand-Projects, Do's and Don'ts, Performance. Proc., Recycling and Stabilisation Conference, Auckland, New Zealand, 2008.
24. Browne, A. Foamed Bitumen Stabilisation in New Zealand-A Performance Review and Lessons Learnt. Proc., Recycling and Stabilisation Conference, Auckland, New Zealand, 2008.