Sub-zero treatments of AISI D2 steel: Part I. Microstructure and hardness

Materials Science and Engineering: A

Volumn 527, Issue 9, 2010, Pages 2182-2193

  Das, Debdulal ^a   Dutta, Apurba Kishore ^a   Ray, Kalyan Kumar ^b  

^a INDIAN INSTITUTE OF ENGINEERING SCIENCE AND TECHNOLOGY   (India)

^b INDIAN INSTITUTE OF TECHNOLOGY   (India)

Author keywords

Carbide precipitation; Decomposition of martensite; Die steel; Hardness; Retained austenite; Sub zero treatment

Indexed keywords

AUSTENITE; CARBIDES; CRYOGENICS; INDENTATION; MICROSTRUCTURE; POPULATION STATISTICS;

AISI D2; CARBIDE PRECIPITATION; COLD TREATMENTS; D2 STEEL; DECOMPOSITION OF MARTENSITE; DEEP CRYOGENIC TREATMENT; DIE STEELS; RETAINED AUSTENITE; SUB ZERO TREATMENT; WEAR BEHAVIORS;

HARDNESS;

EID: 76049105338     PISSN: 09215093     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.msea.2009.10.070     Document Type: Article

References (80)

1. Roberts G., Krauss G., and Kennedy R. Tool Steels. 5th ed. (1998), ASM International, Metals Park, OH, USA
2. Thelning K.E. Steel and Its Heat Treatment. 2nd ed. (1984), Butterworths, London
3. Reed-Hill R.E., and Abbaschian R. Physical Metallurgy Principles. 3rd ed. (1992), PWS Publishing Company, Boston
4. Bowes R.G. Heat Treat. Met. 1 (1974) 29-32
5. Das D., Dutta A.K., Toppo V., and Ray K.K. Mater. Manuf. Process 22 (2007) 474-480
6. Carlson E.A. ASM Handbook, vol. 4, Heat Treating. 10th ed. (1990), ASM International, Metals Park, Ohio pp. 203-206
7. Barron R.F. Cryogenics 22 (1982) 409-413
8. Mohan Lal D., Renganarayanan S., and Kalanidhi A. Cryogenics 41 (2001) 149-155
9. Gulyev A. Metallurgy 12 (1937) 65-77
10. Popandopulo A.N., and Zhukova L.T. Met. Sci. Heat Treat. 22 (1980) 708-710
11. Barron R.F. Prog. Refrig. Sci. Technol. 1 (1973) 529-533
12. Collins D.N. Heat Treat. Met. 2 (1996) 40-42
13. H. Scott, Scientific Papers, Bureau of Standards 16 (1920) 521-536.
14. Mathews J.A. Trans. Am. Soc. Steel Treat. 8 (1925) 565-583
15. Dowdell R.L., and Harder O.E. Trans. Am. Soc. Steel Treat. 11 (1927) 391
16. Luerssen G.V., and Greene O.V. Trans. Am. Soc. Steel Treat. 19 (1932) 501-552
17. Gordon P., and Cohen M. Trans. ASM 30 (1942) 569-588
18. Kennedy J.R. Trans. ASM 34 (1945) 251-309
19. Nordquist N.W. Tooling and Production (July 1953) pp. 72-100
20. Morris V. Machine and Tool Blue Book (Jan 1955) pp. 124-134
21. Wilson V. Iron Age 207 (1971) 58
22. Taylor J. Metalworking Production (May 1978) pp.73-77
23. Miller P.C. Tooling and Production vol. 45 (1980) pp. 82-86
24. Sweeney T.P. Heat Treat. 18 (1986) 28-32
25. Reasbeck R.B. Metallurgia 56 (1989) 178-179
26. Das D., Ray K.K., and Dutta A.K. Wear 267 (2009) 1361-1370
27. Stratton P.F. Mater. Sci. Eng. A449-451 (2007) 809-812
28. Leskovsek V., Kalin M., and Vizintin J. Vacuum 80 (2006) 507-518
29. Preciado M., Bravo P.M., and Alegre J.M. J. Mater. Process. Tech. 176 (2006) 41-44
30. Zhirafar S., Rezaeian A., and Pugh M. J. Mater. Proc. Tech. 186 (2007) 298-303
31. Baldissera P. Mater. Des. 30 (2009) 3636-3642
32. Das D., Dutta A.K., and Ray K.K. Wear 267 (2009) 1371-1380
33. Meng F., Tagashira K., Azuma R., and Sohma H. ISIJ Int. 34 (1994) 205-210
34. Collins D.N., and Dormer J. Heat Treat. Met. 3 (1997) 71-74
35. Yun D., Xiaoping L., and Hongshen X. Heat Treat. Met. 3 (1998) 55-59
36. Z. Zurecki, In: D. Herring, R. Hill (Eds.), Proceedings of the 23rd ASM Heat Treating Society Conference, ASM Proceedings: Heat Treating, Pennsylvania, 2006, pp. 106-113.
37. Das D., Dutta A.K., and Ray K.K. Mater. Sci. Eng. A. 527 (2010) 2194-2206
38. Soundararajan V., Alagurmurthi N., and Palaniradja K. Trans. Mater. Heat Treat. 25 (2004) 531-535
39. Hirotsu Y., and Nagakura S. Acta Met. 20 (1972) 645-655
40. Cheng L., Brakman C.M., Korevaar B.M., and Mittemeijer E.J. Metall. Trans. A19 (1988) 2415-2426
41. Taylor K.A., Olson G.B., Cohen M., and Vander Sande J.B. Metall. Trans. A20 (1989) 2749-2765
42. Cheng L., van der Pers N.M., Böttger A., de Keijser Th.H., and Mittemeijer E.J. Metall. Trans. A22 (1991) 1957-1967
43. In: Unterweiser P.M., Boyer H.E., and Kubbs J.J. (Eds). Hear Treater's Guide-Standard Practices and Procedures for Steel. 4th ed. (1987), ASM, Metal Park, Ohio 300-312
44. Pellizzari M., and Molinari A. In: Bergstrom J., Fredriksson G., Johansson M., Kotik O., and Thuvander F. (Eds). Proceedings of the 6th Int. Tooling Conf., Karlstad University (September 2002) 657-669
45. Rhyim Y.M., Han S.H., Na Y.S., and Lee J.H. Solid State Phenom. 118 (2006) 9-14
46. Wierszyllowski I. Defect Diff. Forum 258-260 (2006) 415-420
47. Moore K.E., and Collins D.N. Key Eng. Mater. 86-87 (1993) 47-54
48. Tiziani A., and Molinari A. Mater. Sci. Eng. A101 (1988) 125-133
49. Fukaura K., Yokoyama Y., Yokoi D., Tsujii N., and Ono K. Metall. Mater. Trans. A35 (2004) 1289-1300
50. Das D., Dutta A.K., and Ray K.K. Philos. Mag. 89 (2009) 55-76
51. Huang J.Y., Zhu Y.T., Liao X.Z., Beyerlein I.J., Bourke M.A., and Mitchell T.E. Mater. Sci. Eng. A339 (2003) 241-244
52. Vimal A.J., Bensely A., Mohan Lal D., and Srinivasan K. Mater. Manuf. Process. 23 (2008) 369-376
53. Surberg C.H., Stratton P., and Klaus Lingenhöle. Cryogenics 48 (2008) 42-47
54. Bensely A., Prabhakaran A., Mohan Lal D., and Nagarajan G. Cryogenics 45 (2005) 747-754
55. Bensely A., Senthilkumar D., Mohan Lal D., Nagarajan G., and Rajadurai A. Mater. Char. 58 (2007) 485-491
56. Prabhakaran A., Bensely A., Nagarajan G., and Mohan Lal D. Proc. Int. Mech. Eng. Conf. (2004) 1-5
57. Bensely A., Shyamala L., Harish S., Mohan Lal D., Nagarajan G., Junik K., and Rajadurai A. Mater. Des. 30 (2009) 2955-2962
58. Bensely A., Venkatesh S., Mohan Lal D., Nagarajan G., Rajadurai A., and Junik K. Mater. Sci. Eng. A479 (2008) 229-235
59. Molinari A., Pellizzari M., Gialanella S., Straffelini G., and Stiasny K.H. J. Mater. Process. Tech. 118 (2001) 350-355
60. Liu H., Wang J., Yang H., and Shen B. Mater. Sci. Eng. A478 (2008) 324-328
61. Liu H., Wang J., Shen B., Yang H., Gao S., and Huang S. Mater. Des. 28 (2007) 1059-1064
62. Babu P.S., Rajendran P., and Rao K.N. IE(I) Journal-MM 86 (2005) 64-67
63. Das D., Dutta A.K., and Ray K.K. Mater. Sci. Technol. 25 (2009) 1249-1257
64. Das D., Dutta A.K., and Ray K.K. Philos. Mag. Lett. 88 (2008) 801-811
65. Baldissera P., and Delprete C. Mater. Des. 30 (2009) 1435-1440
66. Harish S., Bensely A., Mohan Lal D., Rajadurai A., and Lenkey G.B. J. Mater. Process. Tech. 209 (2009) 3351-3357
67. S.C. Jung, D.J. Medlin, G. Krauss, SAE Technical Paper Series (No. 960313), February (1996) 147-158.
68. Das D., Dutta A.K., and Ray K.K. Wear 266 (2009) 297-309
69. Das D., Dutta A.K., and Ray K.K. Cryogenics 49 (2009) 176-184
70. ASTM E975-00: Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation, ASTM Book of Standards, vol. 03.01, West Conshohocken, PA, United States, 2004.
71. Cullity B.D. Elements of X-ray Diffraction. 2nd ed. (1978), Addison Wesley, Reading, NY
72. Nykiel T., and Hryniewicz T. Metall. Mater. Trans. A31 (2000) 2661-2665
73. Muro P., Gimenez S., and Iturriza I. Scr. Mater. 46 (2002) 369-373
74. Iost A., and Bigot R. J. Mater. Sci. 31 (1996) 3573-3577
75. D.J. Kamody, US Patent 6105374, 2000.
76. Mohanty O.N. Mater. Sci. Eng. B32 (1995) 267-278
77. Alexandru I., Alincai G., and Baciu C. Mem. Etudes Sci. Rev. Metall. 87 (1990) 383-389
78. A. Stojko, PhD Thesis, Technical University of Denmark, Denmark, 2006.
79. Pellizzari M. la metallurgia italiana (September 2008) 17-22
80. Akhbarizadeh A., Shafyei A., and Golozar M.A. Mater. Des. 30 (2009) 3259-3264