Effect of reinforcement volume fraction on the mechanical properties of Alg -SiC nanocomposites produced by mechanical alloying and consolidation

Journal of Composite Materials

Volumn 44, Issue 3, 2010, Pages 313-326

  Kamrani, S ^a   Riedel, R ^b   Seyed Reihani, S M ^a   Kleebe, H J ^b  

^a SHARIF UNIVERSITY OF TECHNOLOGY   (Iran)

^b DARMSTADT UNIVERSITY OF TECHNOLOGY   (Germany)

Author keywords

Alg SiC; Grain growth; Mechanical alloying; Mechanical properties; Nanocomposite

Indexed keywords

ALG-SIC; FINER PARTICLES; GRAIN SIZE; HARDNESS TEST; HIGH-RESOLUTION SCANNING ELECTRON MICROSCOPIES; MATRIX; MECHANICAL STRENGTH; MILLED POWDERS; NEAR-NET SHAPE; PROCESSING METHOD; SIC GRAINS; SIC PARTICLES; X-RAY DIFFRACTION METHOD;

CRYSTALLITE SIZE; GRAIN BOUNDARIES; GRAIN SIZE AND SHAPE; HARDNESS TESTING; HIGH RESOLUTION ELECTRON MICROSCOPY; MECHANICAL ALLOYING; MECHANICAL PROPERTIES; METALLURGY; NANOCOMPOSITES; REINFORCEMENT; SCANNING ELECTRON MICROSCOPY; SILICON CARBIDE; SINTERING; TITRATION; VOLUME FRACTION; X RAY POWDER DIFFRACTION;

GRAIN GROWTH;

EID: 76049095583     PISSN: 00219983     EISSN: 1530793X     Source Type: Journal    
DOI: 10.1177/0021998309347570     Document Type: Article

References (29)

1. Nayeb-Hashemi, H. and Shan, D. (1999). Evaluation of Heat Damage on B4C Particulate Reinforced Aluminum Alloy Matrix Composite Using Acoustic Emission Techniques, Mater. Sci. Eng. A, 266: 8-17.
2. Kok, M. (2005). Production and Mechanical Properties of Al2O3 Particle-reinforced 2024 Aluminum Alloy Composites, J. Mater. Proc. Tech., 161: 381-387.
3. Prabhu, B., Suryanarayana, C., An, L. and Vaidyanathan, R. (2006). Synthesis and Characterization of High Volume Fraction Al-Al2O3 Nanocomposite Powders by High-energy Milling, Mater. Sci. Eng. A, 425: 192-200.
4. Zhang, D.L., Liang, J. and Wu, J. (2004). Processing Ti3Al-SiC Nanocomposites Using High Energy Mechanical Milling, Mater. Sci. Eng. A, 375-377: 911-916.
5. Hesabi, Z., Hafizpour, H.R. and Simchi, A. (2007). An Investigation on the Compressibility of Aluminum/Nano-alumina Composite Powder Prepared by Blending and Mechanical Milling, Mater. Sci. Eng. A, 454-455: 89-98.
6. Weiser, M.W. and De Jonghe, L.C. (1988). Inclusion Size and Sintering of Composite Powders, J. Amer. Ceram. Soc., 71: 125-127.
7. Kang, Y.C. and Chan, S.L. (2004). Tensile Properties of Nanometric Al2O3 Particulate-reinforced Aluminum Matrix Composites, Mater. Chem. Phys., 85: 438-443.
8. Yang, Y., Lan, J. and Li, X. (2004). Study on Bulk Aluminum Matrix Nano-composite Fabricated by Ultrasonic Dispersion of Nano-sized SiC Particles in Molten Aluminum Alloy, Mater. Sci. Eng. A, 380: 378-383. (Pubitemid 38964554)
9. Ma, Z.Y., Tjong, S.C. and Li, Y.L. (1999). The Performance of Aluminum-matrix Composites with Nanometric Particulate Si-N-C Reinforcement, Comp. Sci. Tech., 59: 263-270.
10. Goujon, C. and Goeuriot, P. (2001). Solid State Sintering and High Temperature Compression Properties of Al-alloy5000/AlN Nanocomposites, Mater. Sci. Eng. A, 315: 180-188.
11. Williamson, G.K. and Hall, W.H. (1953). X-Ray Line Broadening from Filed Aluminum and Wolfram, Acta Metall., 1: 22-31.
12. Schatt, W. and Wieters, K.P.S. (1997). Powder Metallurgy: Processing and Materials, E PMA, Shrewsbury, UK.
13. Kamrani, S., Simchi, A., Riedel, R. and Seyed Reihani, S.M. (2007). Effect of Reinforcement Volume Fraction on Mechanical Alloying of Al-SiC Nanocomposite Powders, Powder Metall., 50: 276-282.
14. Zhang, Z., Zhou, F. and Lavernia, E.J. (2003). On the Analysis of Grain Size in Bulk Nanocrystalline Materials via X-ray Diffraction, Metall. Mater. Trans., 34A: 1349-1355.
15. Suryanarayana, C. (2001). Mechanical Alloying and Milling, Prog. Mater. Sci., 46: 1-184.
16. Zhang, D.L. (2004). Processing of Advanced Materials Using High-energy Mechanical Milling, Prog. Mater. Sci., 49: 537-560.
17. Chung, K.H., He, J., Shin, D.H. and Schoenung, J.M. (2003). Mechanisms of Microstructure Evolution During Cryomilling in the Presence of Hard Particles, Mater. Sci. Eng. A, 356: 23-31.
18. Tavakoli, A.H., Simchi, A. and Seyed Reihani, S.M. (2005). Study of the Compaction Behavior of Composite Powders Under Monotonic and Cyclic Loading, Comp. Sci. Tech., 65: 2094-2104.
19. Hafizpour, H.R. and Simchi, A. (2008). Investigation on Compressibility of Al-SiC Composite Powders, Powder Metall., 51: 217-223.
20. Durisin, J., Durisinova, K., Orol±nova, M. and Saksl, K. (2004). Effect of the MgO Particles on the Nanocrystalline Copper Grain Stability, Mater. Lett., 58: 3796-3801.
21. Tang, F., Hagiwara, M. and Schoenung, J.M. (2005). Microstructure and Tensile Properties of Bulk Nanostructured Al-5083/SiCp Composites Prepared by Cryomilling, Mater. Sci. Eng. A, 407: 306-314.
22. Munoz-Morris, M.A., Garcia Oca, C. and Morris, D.G. (2002). An Analysis of Strengthening Mechanisms in a Mechanically Alloyed, Oxide Dispersion Strengthened Iron Aluminide Intermetallic, Acta Mater., 50: 2825-2836.
23. Tong, X.C. and Ghosh, A.K. (2001). Fabrication of In Situ TiC Reinforced Aluminum Matrix Composites, J. Mater. Sci., 36: 4059-4069.
24. Premkumar, M.K., Lawley, A. and Koczak, M.J. (1994). Mechanical Behavior of Powder Metallurgy Al-Fe-Ni Alloys, Mater. Sci. Eng. A, 174: 127-139.
25. Lee, J.C., Byun, J.Y., Oh, C.S., Seok, H.K. and Lee, H.I. (1997). Effect of Various Processing Methods on the Interfacial Reactions in SiCp/2024 Al Composites, Acta Mater., 45: 5303-5315.
26. Kubota, M. (2007). Properties of Nano-structured Pure Al Produced by Mechanical Grinding and Spark Plasma Sintering, Mater. Sci. Eng. A, 434-435: 294-297.
27. Kubota, M. and Wynne, B.P. (2007). Electron Backscattering Diffraction Analysis of Mechanically Milled and Spark Plasma Sintered Pure Aluminium, Scrip. Mater., 57: 719-722.
28. Witkin, D.B. and Lavernia, E.J. (2006). Synthesis and Mechanical Behavior of Nanostructured Materials via Cryomillin, Prog. Mater. Sci., 51: 1-60.
29. Balog, M., Izdinsky, K., Nagy, J., Simancik, F. and Donic, T. (2005). Ultra-fine Grained PM Al Profiles, In: Proceedings of the International Conference Deformation and Fracture in structural PM Materials, Stara Lensa, Slovak Republic, pp. 301-307.