Cement-slurry performance and set-cement properties vs. microsilica densification

SPE Drilling and Completion

Volumn 24, Issue 4, 2009, Pages 590-598

  Daou, Fatma ^a   Piot, Bernard ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

CEMENTS; DENSITY (SPECIFIC GRAVITY); ELECTRIC FURNACES; FERROALLOYS; MATERIALS HANDLING; MORPHOLOGY; OIL FIELDS; PARTICLE SIZE; PARTICLE SIZE ANALYSIS; SCANNING ELECTRON MICROSCOPY; SILICA FUME; SILICON ALLOYS; SIZE DISTRIBUTION; SPECTROMETERS; STABILITY;

CIVIL ENGINEERING INDUSTRY; DEGREE OF DENSIFICATION; ENERGY DISPERSIVE SPECTROMETERS; FERROSILICON ALLOYS; HANDLING CHARACTERISTICS; OIL FIELD APPLICATIONS; POZZOLANIC MATERIALS; ULTRASONIC TREATMENTS;

CEMENT INDUSTRY;

BULK DENSITY; CEMENT; CIVIL ENGINEERING; GRAVITY; OIL FIELD; SCANNING ELECTRON MICROSCOPY; SILICON; SIZE DISTRIBUTION; SLURRY;

EID: 75949086366     PISSN: 10646671     EISSN: None     Source Type: Journal    
DOI: 10.2118/112701-PA     Document Type: Article

References (27)

1. ACl 234R-96, Guide for the Use of Silica Fume in Concrete. 2000. Farmington Hills, Michigan: American Concrete Institute.
2. ASTM CI240-05, Standard Specification for Silica Fume Used in Cementitious Mixtures. 2005. West Conshohocken, PA: ASTM International. doi: 10.1520/C1240-05.
3. Aïtcin, P.C., Pinsonneault, P., and Rau, G. 1981. The Use of Condensed Silica Fume in Concrete. Proc, Materials Research Society Annual Meeting, Boston, Massachusetts, USA, November 1981, 316-325.
4. Brunauer, S., Emmett, PH., and Teller, E. 1938. Adsorption of Gases in Multimolecular Layers. J. Am. Chem. Soc. 60 (2): 309-319. doi: 10.1021/ja01269a023
5. Carr, R.L. Jr. 1965. Classifying Flow Properties of Solids. Chem. Eng. 72 (3): 69-72.
6. Diamond S., Sahu, S., and Thaulow, N. 2004. Reaction products of den- sified silica fume agglomerates in concrete. Cement and Concrete Research 34 (9): 1625-1632. doi: 10.1016/j.cemconres.2004.01.031.
7. Diamond, S. and Sahu, S. 2006. Densified silica fume: particle sizes and dispersion in concrete. Materials and Structures 39 (9): 849-859. doi: 10.1617/s 11527-006-9087-y.
8. Ferraris, C.F., Clifton, J.R., Garboczi, E.J., and Davis, F.L. 1997. Stress Due to Alkali-Silica reaction in mortars. In Mechanisms of Chemical Degradation of Cement-Based Systems, ed. K.L. Scrivener and J.F. Young, Chap. 9, 75-82. London: E &FN Spon (Chapman &Hall).
9. Guillot, D. 2007. Rheology and flow of well cement slurries. In Well Cementing, second edition, ed. E.B. Nelson and D. Guillot, Chap. 4, 93-142 . Sugar Land, Texas: Schlumberger.
10. Hausner, H.H. 1967. Friction Conditions in a Mass of Metal Powder. International Journal of Powder Metallurgy 3 (4): 7-13.
11. Ioannides, A.M. and Deshini, A. 2006. Fineness of Densified Microsilica and Dispersion in Concrete Mixes. Final Report No. FHWA/OH-2006/17, Contract No. 148000, Ohio Department of Transportation, Cincinnati, Ohio (June 2006).
12. ISO 10426-2:2003, Petroleum and natural gas industries - Cements and materials for well cementing - Part 12: Determination of rheological properties and gel strength using a rotational viscometer. 2003a. Geneva, Switzerland: ISO.
13. ISO 10426-2:2003, Petroleum and natural gas industries - Cements and materials for well cementing - Part 15: Well-simulation slurry stability tests. 2003b. Geneva, Switzerland: ISO.
14. Kaye, B.H., Gratton-Liimatainen, J., and Faddis, N. 1995. Studying the avalanching behavior of powder in a rotating disc. Part. Syst. Charact. 12 (5): 232-236. doi: 10.1002/ppsc.l9950120505.
15. Lagerblad, B. and Utkin, P. 1995. Undispersed granulated silica fume in concrete - chemical system and durability problems. Proc. Mater. Res. Soc. 370: 89-97.
16. Lee, Y.S.L., Poynter, R., Podczeck, F., and Newton, J.M. 2000. Development of a Dual Approach to Assess Powder Flow from Avalanching Behavior. MPS PharmSciTech 1 (3): article 21.
17. Loland, K.E. 1981. Silica Fume in Concrete. Report No. SFT65-F81011, University of Trondheim, Trondheim, Norway.
18. Malhotra, V.M., Ramachandran, VS., Feldman, R.F., and Atcin, PC. 1987. Condensed Silica Fume in Concrete, 1-67. Boca Raton, Florida: CRC Press.
19. Marusin, S.L. and Shotwell, L.B. 2002. Alkali-Silica Reaction in Concrete Caused by Densified Silica Fume Lumps: A Case Study. Cement, Concrete and Aggregates 22 (2): 90-94.
20. Matinez-Velandia, D., Payá, J., Monz, J. and Borrachero, M.V. 2008. Granulometric activation of densified silica fume (CSF) by sonica- tion. Advances in Cement Research 20 (3): 129-135. doi: 10.1680/ adcr.2008.20.3.129.
21. Nelson, E.B., Michaux, M., and Drochon, B. 2007. Cement additives and mechanisms of action. In Well Cementing, second edition, ed. E.B. Nelson and D. Guillot, Chap. 3, 49 - 90. Sugar Land, Texas: Schlumberger.
22. Rangaraju, PR. and Olek, J. 2000. Evaluation of the Potential of Densified Silica Fume to Cause Alkali-Silica Reaction in Cementitious Matrices Using Modified ASTM C1260 Test Procedure. Cement, Concrete and Aggregates 22 (2): 150-159.
23. Shayan, A., Quick, G.W., and Lanucki, C.J. 1993. Morphological, min- eralogical and chemical features of steam-cured concretes containing densified silica fume and various alkali levels. Advances in Cement Research 5 (20): 151-162.
24. St. John, D.A. 1994. The Dispersion of Silica Fume. Report No. 244, Industrial Research Limited, Lower Hutt, New Zealand, 29.
25. Thalberg, K., Lindholm, D., and Axelsson, A. 2004. Comparison of different flowability tests for powders for inhalation. Product Development. Powder Technology 146 (3): 206-213. doi: 10.1016/j.powtec.2004.08. 003.
26. Wolsiefer, J. Sr. 2000. The Measurement and Analysis of Silica Fume Particle Size Distribution and Dispersion. Presented at the 5th CAN- MET/ACI International Conference on the Durability of Concrete, Barcelona, Spain, 4-9 June.
27. Wolsiefer, J. Sr. 2007. The Measurement and Analysis of Silica Fume Particle Size Distribution and De-Agglomeration of Different Silica Fume Product Forms. In ACl Special Publication Vol. 242, Doc. SP242-10, 111-132. Farmington Hills, Michigan: American Concrete Institute.