Influence of dispersant, storage time and temperature on the rheological properties of zirconia-paraffin feedstocks for LPIM

Journal of the European Ceramic Society

Volumn 30, Issue 6, 2010, Pages 1391-1400

  Çetinel, Fatih A ^a   Bauer, Werner ^a   Müller, Marcus ^a   Knitter, Regina ^a   Haußelt, Jürgen ^a  

^a KARLSRUHE INSTITUTE OF TECHNOLOGY   (Germany)

Author keywords

Injection moulding; Low pressure injection moulding; Plasticity; Rheology; ZrO2

Indexed keywords

ADSORPTION MODEL; BINDER COMPOSITION; CALCULATED VALUES; CHEMICAL INTERACTIONS; DISPERSANTS; ELEVATED TEMPERATURE; FLOW ACTIVATION ENERGY; FLOW INDICES; INJECTION MOULDING; LOW-PRESSURE INJECTION MOULDING; PRESSURE INJECTION; REPRODUCIBILITIES; RHEOLOGICAL PROPERTY; SHEAR RATES; SOLIDS LOADING; STORAGE TIME; TIME-DEPENDENT; TIME-DEPENDENT FLOW; WORKING TEMPERATURES; ZIRCONIA PARTICLES;

ACTIVATION ENERGY; ADSORPTION; ELASTICITY; FEEDSTOCKS; INJECTION MOLDING; MONOLAYERS; PARAFFIN WAXES; PARAFFINS; PLASTICITY; RHEOLOGY; SHEAR DEFORMATION; STRESS ANALYSIS; VISCOSITY; YIELD STRESS; ZIRCONIUM ALLOYS;

ZIRCONIA;

EID: 75749146565     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2009.12.003     Document Type: Article

References (39)

1. Bauer W., and Knitter R. Development of a rapid prototyping process chain for the production of ceramic microcomponents. Journal of Materials Science 37 (2002) 3127-3140
2. Wang J., Liu G., Xiong Y., Huang X., Guo Y., and Tian Y. Fabrication of ceramic microcomponents and microreactor for the steam reforming of ethanol. Microsystem Technologies 14 (2008) 1245-1249
3. Rahaman M.N. Ceramic processing (2007), Taylor & Francis, Boca Raton
4. Rota A. Pulvermetallurgische Verfahrensentwicklung für miniaturisierte und mikrostrukturierte Bauteile. PhD Thesis. University of Bremen, Fraunhofer IFAM, Stuttgart; 2001.
5. Bauer W., Hausselt J., Merz L., Müller M., Örlygsson G., and Rath S. Microceramic injection molding. In: Baltes H., Brand O., Fedder G.K., Hierold C., Korvink J., and Tabata O. (Eds). Microengineering of metals and ceramics (Part I) (2005), WILEY-VCH, Weinheim 325-356
6. Piotter V., Bauer W., Benzler T., and Emde A. Injection molding of components for microsystems. Microsystem Technologies 7 (2001) 99-102
7. Dakskobler A., and Kosmac T. Rheological properties of re-melted paraffin-wax suspensions used for LPIM. Journal of the European Ceramic Society 29 10 (2009) 1831-1836
8. Ritzhaupt-Kleissl H.-J., Bauer W., Günther E., Laubersheimer J., and Haußelt J. Development of ceramic microstructures. Microsystem Technologies 2 3 (1996) 130-134
9. Loh N.H., Tor S.B., Tay B.Y., Murakoshi Y., and Maeda R. Fabrication of micro gear by micro powder injection molding. Microsystem Technologies 14 (2007) 43-50
10. Lewis J.A. Colloidal Processing of Ceramics. Journal of the American Ceramic Society 83 10 (2000) 2341-2359
11. Müller M., Bauer W., and Ritzhaupt-Kleissl H.-J. Defect levelling during debinding for improved mechanical properties of ceramic micro parts. Proceedings of the 3rd international conference on the shaping of advanced ceramics. Limoges (2006) 59-64
12. Müller M., Rögner J., Okolo B., Bauer W., and Ritzhaupt-Kleissl H.-J. Factors influencing the mechanical properties of moulded zirconia micro parts. Proceedings of the 10th international conference and exhibition of the European Ceramic Society. Berlin (2007) 1291-1296
13. Kasanická B. Prozess-Gefüge-Eigenschafts-Beziehungen für das Urformen von Mikroproben, PhD Thesis. University of Karlsruhe, In: Löhe, D., Wanner A, Gumbsch P, Kraft O, Elsner P, Schulze V (Eds.), Schriftenreihe Werkstoffwissenschaft und Werkstofftechnik (44). Aachen, Shaker; 2008.
14. 2 micro-specimens. International Journal of Materials Research 6 (2004) 551-558
15. Tseng W.J., Liu D.M., and Hsu C.K. Influence of stearic acid on suspension structure and green microstructure of injection-molded zirconia ceramics. Ceramics International 25 2 (1999) 191-195
16. Lenk R., and Krivoshchepov A.P. Effect of surface-active substances on the rheological properties of silicon carbide suspensions in paraffin. Journal of American Ceramic Society 83 2 (2000) 273-276
17. Liu D.M. Control of yield stress in low-pressure ceramic injection moldings. Ceramics International 25 7 (1999) 587-592
18. Zürcher S., and Graule T. Influence of dispersant structure on the rheological properties of highly-concentrated zirconia dispersions. Journal of the European Ceramic Society 25 6 (2005) 863
19. Moloney V.M.B., Parris D., and Edirisinghe M.J. Rheology of zirconia suspensions in a nonpolar organic medium. Journal of the American Ceramic Society 78 12 (1995) 3225-3232
20. Johnson R.E., and Morrison W.H. Ceramic powder dispersion in nonaqueous systems. In: Messing G.L., Mazdiyasni K.S., McCauley J.W., and Haber R.A. (Eds). Advances in ceramics, vol. 21: Ceramic powder science (1987), The American Ceramic Society 323-348
21. Novak S., Vidovic K., Sajko M., and Kosmac T. Surface modification of alumina powder for LPIM. Journal of the European Ceramic Society 17 2-3 (1997) 217-223
22. Bartelt G., Bauer W., and Haußelt J. Hot molding of zirconia microparts. Progress in Colloid and Polymer Science 121 (2002) 19-22
23. Liu D.M. Effect of dispersants on the rheological behavior of zirconia-wax suspensions. Journal of the American Ceramic Society 82 5 (1999) 1162-1168
24. Phillips K.M., and Wightman J.P. Adsorption for binary solutions of polar n-decyl derivatives and heptane onto alumina. Journal of Colloid and Interface Science 108 2 (1985) 495-502
25. Kippling J.J., and Wright E.H.M. The adsorption of stearic acid from solution by oxide adsorbents. Journal of Chemical Society (1964) 3535-3540
26. Chan T.Y., and Lin S.T. Effects of stearic acid on the injection molding of alumina. Journal of the American Ceramic Society 78 10 (1995) 2746-2752
27. Li Y.M., Liu X.Q., Luo F.H., and Yue J.L. Effects of surfactant on properties of MIM feedstock. Transactions of Nonferrous Metals Society of China 17 (2007) 1-8
28. Reiner M. Rheologie in elementarer Darstellung (1969), Carl Hanser, München
29. Mezger T.G. Das Rheologie Handbuch (2006), Vincentz Network, Hannover
30. Edirisinghe M.J., and Evans J.R.G. Rheology of ceramic injection moulding formulations. British Ceramic Transactions 86 (1987) 18-22
31. Jardiel T., Sotomayor M.E., Levenfeld B., and Várez A. Optimization of the processing of 8-YSZ powder by powder injection molding for SOFC electrolytes. International Journal of Applied Ceramic Technology 5 6 (2008) 574-581
32. Liu D.M., and Tseng W.J. Yield behavior of zirconia-wax suspensions. Materials Science and Engineering: A 254 1-2 (1998) 136-146
33. Loebbecke B., Knitter R., and Haußelt J. Rheological properties of alumina feedstocks for the low-pressure injection moulding process. Journal of the European Ceramic Society 29 9 (2009) 1595-1602
34. Liu D.M., and Tseng W.J. Rheology of injection-molded zirconia-wax mixtures. Journal of Materials Science 35 (2000) 1009-1016
35. Novak S., Dakskobler A., and Ribitsch V. The effect of water on the behaviour of alumina-paraffin suspensions for low-pressure injection moulding (LPIM). Journal of the European Ceramic Society 20 12 (2000) 2175-2181
36. Heldele R. Entwicklung und Charakterisierung von Formmassen für das Mikropulverspritzgießen. PhD Thesis. University of Freiburg, Freiburg; 2008.
37. German R.M. Powder injection molding (1990), Metal Powder Industries Federation, Princeton
38. Hanemann T., and Honnef K. Process chain development for the realization of zirconia microparts using composite reaction molding. Ceramics International 35 1 (2009) 269-275
39. Song J.H., and Evans J.R.G. The assessment of dispersion of fine ceramic powders for injection moulding and related processes. Journal of the European Ceramic Society 12 (1993) 467-478