Reinforcing and toughening effects of bamboo pulp fiber on poly(3-hydroxybutyrate-C0-3-hydroxyvalerate) fiber composites

Industrial and Engineering Chemistry Research

Volumn 49, Issue 2, 2010, Pages 572-577

  Jiang, Long ^a   Chen, Feng ^a   Qian, Jun ^a   Huang, Jijun ^b   Wolcott, Michael ^a   Liu, Linshu ^c   Zhang, Jinwen ^a  

^a Washington State University   (United States)

^b University of Massachusetts Lowell   (United States)

^c EASTERN REGIONAL RESEARCH CENTER   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

3-HYDROXYBUTYRATE; 3-HYDROXYVALERATE; BAMBOO PULP; BIO-COMPOSITES; DIFFERENT PROCESS; DIPHENYLMETHANE DIISOCYANATE; DYNAMIC MECHANICAL PROPERTY; FIBER COMPOSITE; FIBER PULL OUT; FRACTURE SURFACES; IMPACT TEST; IMPACT TOUGHNESS; INTERFACIAL ADHESIONS; MATRIX; MICROSCOPIC STUDY; POLY(3-HYDROXYBUTYRATE-CO-3-HYDROXYVALERATE); PULP FIBERS; STRUCTURAL CHANGE; TENSION TESTS; TOUGHENING EFFECTS;

ACOUSTIC EMISSION TESTING; ADHESION; BAMBOO; COUPLING AGENTS; FIBERS; IMPACT STRENGTH; IMPACT TESTING; MECHANICAL PROPERTIES; TENSILE TESTING;

TENSILE STRENGTH;

ADHESION; BAMBOO; COUPLING AGENTS; FIBERS; IMPACT STRENGTH; IMPACT TESTS; MECHANICAL PROPERTIES; TENSILE STRENGTH; TENSILE TESTS;

EID: 75249106321     PISSN: 08885885     EISSN: None     Source Type: Journal    
DOI: 10.1021/ie900953z     Document Type: Article

References (34)

1. Marchessault, R. H.; Coulombe, S.; Morikawa, H.; Keizo, O.; Revol, J. F. Solid state properties of poly-β-hydroxybutyrate and of its oligomers. Can. J. Chem. 1981, 59, 38.
2. Barham, P. J.; Keller, A.; Otun, E. L.; Holmes, P. A. Crystallization and morphology of a bacterial thermoplastic: poly-3-hydroxybutyrate. J. Mater. Sci. 1984, 19, 2781.
3. Holmes, P. A. Biologically produced PHA polymers and copolymers. In Development in Crystalline Polymers; Bassett, D. C. Ed.; Elsevier Applied Science Publishers: London, 1988.
4. Jiang, L.; Zhang, J.; Wolcott, M. P. Toughening poly(3-hydroxybutyrate- co-3-hydroxyvalerate)(PHBV) with poly(butylene adipate-co-terephthalate)(PBAT). PMSE Preprints 2006, 95, 1037.
5. Cimmino, S.; Iodice, P.; Karasz, F. E. Atactic poly(methyl meth-acrylate) blended with poly (3-D(-)hydroxybutyrate): miscibility and mechanical properties. J. Appl. Polym. Sci. 2000, 75, 746.
6. Abbate, M.; Martuscelli, E.; Ragosta, G.; Scarinzi, G. Tensile properties and impact behaviour of poly(D(- )3-hydroxybutyrate)/rubber blends. J. Mater. Sci. 1991, 26, 1119.
7. Kumagai, Y.; Doi, Y. Enzymatic degradation and morphologies of binary blends of microbial poly(3-hydroxy butyrate) with poly(e-caprolactone), poly(1,4-butylene adipate and poly(vinyl acetate). Polym. Degrad. Stab. 1992, 36, 241.
8. Avella, M.; Martuscelli, E.; Orsello, G.; Raimo, M.; Pascucci, B. Poly(3-hydroxybutyrate)/poly(methyleneoxide) blends: thermal, crystallization and mechanical behaviour. Polymer 1997, 38, 6135.
9. Yoon, J. S.; Lee, W. S.; Jin, H. J.; Chin, I. J.; Kim, M. N.; Go, J. H. Toughening of poly(3-hydroxybutyrate) with poly(cis-1,4-isoprene). Eur. Polym. J. 1999, 35, 781.
10. Zhang, J.; McCarthy, S.; Whitehouse, R. Reverse temperature injection molding of biopoltm and effect on its properties. J. Appl. Polym. Sci. 2004, 94, 483.
11. Herrmann, A. S.; Nickel, J.; Riedel, U. Construction materials based upon biologically renewable resources-from components to finished parts. Polym. Degrad. Stab. 1998, 59, 251.
12. Riedel, U.; Nickel, J. Natural fibre-reinforced biopolymers as construction materials-new discoveries. Angew. Makromol. Chem. 1999, 272, 34.
13. Mohanty, A. K.; Misra, M.; Drzal, L. T. Sustainable Bio-Composites from Renewable Resources: Opportunities and Challenges in the Green Materials World. J. Polym. Environ. 2002, 10, 19.
14. Ouajai, S.; Hodzic, A.; Shanks, R. A. Morphological and grafting modification of natural cellulose fibers. J. Appl. Polym. Sci. 2004, 94, 2456.
15. Wong, S.; Shanks, R.; Hodzic, A. Properties of poly(3-hydroxybutyric acid) composites with flax fibres modified by plasticiser absorption. Macromol. Mater. Eng. 2002, 287, 647.
16. Bhardwaj, R.; Mohanty, A.; Drzal, L. T.; Pourboghrat, F.; Misra, M. Renewable resource-based green composites from recycled cellulose fiber and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Bioplastic. Biom-acromolecules 2006, 7, 2044.
17. Van De Velde, K.; Kiekens, P. Biopolymers: overview of several properties and consequences on their applications. Polym. Test. 2002, 21, 433.
18. Reinsch, V.; Kelley, S. Crystallization of poly (hydroxybutyrate-co- hydroxyvalerate) in wood fiber-reinforced composites. J. Appl. Polym. Sci. 1997, 64, 1785.
19. Fernandes, E. G.; Pietrini, M.; Chiellini, E. Biomacromolecules 2004, 5, 1200.
20. Singh, S.; Mohanty, A. K. Wood fiber reinforced bacterial Bioplastic composites: Fabrication and performance evaluation. Compos. Sci. Technol. 2007, 67, 1753.
21. Luo, S.; Netravalli, A. N. Interfacial and mechanical properties of environment-friendly "green" composites made from pineapple fibers and poly(hydroxybutyrate-co-valerate) resin. J. Mater. Sci. 1999, 34, 3709.
22. Saxena, M.; Gowri, V. S. Studies on bamboo polymer composites with polyester amide polyol as interfacial agent. Polym. Compos. 2003, 24, 428.
23. Das, M.; Pal, A.; Chakraborty, D. Effects of mercerization of bamboo strips on mechanical properties of unidirectional bamboo-novolac composites. J. Appl. Polym. Sci. 2006, 100, 238.
24. Chen, X.; Guo, Q.; Mi, Y. Bamboo fiber-reinforced polypropylene composites: A study of the mechanical properties. J. Appl. Polym. Sci. 1998, 69, 1891.
25. Takagi, H.; Ichihara, Y. Effect of Fiber Length on Mechanical Properties of "Green" Composites Using a Starch-Based Resin and Short Bamboo Fibers. JSME Int. J., Ser. A 2004, 47, 551.
26. Lee, S. H.; Ohkita, T. Bamboo fiber (BF)-filled poly(butylenes succinate) bio-composite-Effect of BF-e-MA on the properties and crystallization kinetics. Holzforschung 2004, 58, 537.
27. Lee, S. H.; Ohkita, T.; Kitagawa, K. Eco-composite from poly (lactic acid) and bamboo fiber. Holzforschung 2004, 58, 529.
28. Tung, N. H.; Yamamoto, H.; Matsuoka, T.; Fujii, T. Effect of surface treatment on interfacial strength between bamboo fiber and PP resin. JSME Int. J., Ser. A 2004, 47, 561.
29. Jiang, L.; Huang, J.; Qian, J.; Chen, F.; Zhang, J.; Wolcott, P. M.; Zhu, Y. Study of Poly(3-hydroxybutyrate- co-3-hydroxyvalerate) (PHBV)/ Bamboo Pulp Fiber Composites: Effects of Nucleation Agent and Compatibilizer. J. Polym. Environ. 2008, 16, 83.
30. Girones, J.; Pimenta, M. T. B.; Vilaseca, F.; de Carvalho, A. J. F.; Mutje, P.; Curvelo, A. A. S. Blocked isocyanates as coupling agents for cellulose-based composites. Carbohyd. Polym. 2007, 68, 537.
31. Geng, Y.; Li, K.; Simonsen, J. A commercially viable compatibilizer system for wood-polyethylene composites. J. Adhes. Sci. Technol. 2005, 19, 1363.
32. Agarwal, B. D. Broutman, L. J. Analysis and Performance ofFiber Composites, 2nd ed.; John Wiley & Sons: New York, 1990.
33. Bismarck, A.; Mishra, S.; Lampke, T.; Plant fibers as reinforcement for green composites. In: Natural fibers, Biopolymers, and Biocomposites; Mohanty, A., Misra, M., Drzal, L. Eds.; Boca Raton: CRC Press, 2005.
34. Amada, S.; Lchikawa, Y.; Munekata, T.; Nagase, Y.; Shimizu, H. Fiber texture and mechanical graded structure of bamboo. Compos.: Part B 1997, 28B, 13.