Novel approach to tar removal from biomass producer gas by means of a nickel-based catalyst

Proceedings of the 20th International Conference on Fluidized Bed Combustion

Volumn , Issue , 2009, Pages 740-746

  Vosecky M ^a   Kamenikova P ^a   Pohorely M ^a   Skoblja, S ^a   Puncochar M ^a  

^a INSTITUTE OF CHEMICAL PROCESS FUNDAMENTALS   (Czech Republic)

Author keywords

Biomass gasification; Catalytic tar removal; Fluidized bed; Nickel catalyst; Steam reforming

Indexed keywords

BIOMASS; CATALYSTS; CATALYTIC REFORMING; CHEMICAL SHIFT; COPPER OXIDES; FLUIDIZED BEDS; GASES; GASIFICATION; HYDROCARBONS; II-VI SEMICONDUCTORS; NICKEL; STEAM REFORMING; SULFUR COMPOUNDS; TAR; WATER GAS SHIFT; ZINC OXIDE;

BIOMASS GASIFICATION; CATALYTIC REACTOR; HIGHER HYDROCARBONS; LOWER HEATING VALUE; NICKEL BASED CATALYSTS; NICKEL CATALYST; TAR REMOVAL; WATER GAS SHIFT (WGS) REACTION;

FLUIDIZED BED COMBUSTION;

EID: 75149180188     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1007/978-3-642-02682-9_114     Document Type: Conference Paper

References (20)

1. Arauzo, J., Radlein, D., Piskorz, J., Scott, D.S.: Energy Fuels 8 (1994), pp. 1192-1196.
2. Arena, F., Trunfio, G., Alongi, E., Branca, D. and Parmaliana, A.: Appl. Catal. A-Gen. 266 (2004), pp. 155-162.
3. Arena F.: AIChE J 52(8) (2006), pp. 2823-2831.
4. Bain, R.L., Dayton, D.C, Carpenter, D.L. Czernik, S.R. et al: Ind. Eng. Chem. Res. 44 (2005), pp.7945-7956.
5. Baker, E.G., Mudge, L.K., Brown, M.D.: Ind. Eng. Chem. Res. 26 (1987), pp. 1335-1339.
6. Bangala, D.N., Abatzoglou, N., Chornet, E.: AIChE J, 44(4) (1998), pp. 927-936.
7. Chen, Y., Xu, H., Jin, X., Xiong, G.: Catal. Tod., 116 (2006), pp. 334-340.
8. Coll, R., Salvado, J., Farriol, X., Montane, D.: Fuel Process. Technol. 74 (2001), pp. 19-31.
9. Corella, J., Orio, A., Aznar, P.: Ind. Eng. Chem. Res. 37 (1998), pp. 4617-4624.
10. Gebhard, S.C., Wang, D., Overend, R.P., Paisley, M.A.: Biomass Bioenerg. 7 (1994), pp. 307-313.
11. Nacken, M., Ma, L., Engelen, K., Heidenreich, S., Baron, G.V.: Ind. Eng. Chem. Res. 46 (2007), pp. 1945-1951.
12. Pfeifer, C., Hofbauer, H.: Powder Technol. 180 (2008), pp. 9-16.
13. Rostrup-Nielsen, J.R.R.: Catalytic Steam Reforming. Berlin : Springer, 130 pp. ISBN 3-540-12665-1.
14. Sato, K., Fujimoto, K.: Catal. Commun. 8 (2007), pp. 1697-1701.
15. Simell, P.A., Bredenberg, J.B.: Fuel, 69 (1990), pp. 1219-1225.
16. Simell, P.A., Hepola, J.O., Krause, A.O.I.: Fuel, 76 (1997), pp. 1117-1127.
17. Stevens, D.J.: National Energy Laboratory Report No. NREL/SR-510-29952, USA, 2001, 103.
18. Torres, W., Pansare, S.S., Goodwin, J.G: Catal. Rev.-Sci. Eng. 49 (2007), pp.407-456.
19. nd ed. London:Manson Publishing. 1996, 608 pp. ISBN 1-874545-36-7.
20. Wang, W., Padban, N., Ye, Z., Olofsson, G.; Andersson, A. : Bjerle, I.: Ind. Eng.Chem. Res. 39 (2000), pp. 4075-4081.