Effect of dry/wet-phase inversion method on fabricating polyetherimide-derived CMS membrane for H2/N2 separation

International Journal of Hydrogen Energy

Volumn 35, Issue 4, 2010, Pages 1650-1658

  Itta, Arun Kumar ^a   Tseng, Hui Hsin ^b   Wey, Ming Yen ^a  

^a NATIONAL CHUNG HSING UNIVERSITY   (Taiwan)

^b CHUNG SHAN MEDICAL UNIVERSITY   (Taiwan)

Author keywords

Carbon membrane; H2 purification; Phase inversion method; Polyetherimide; Slide casting

Indexed keywords

ALUMINA SUPPORT; CARBON MEMBRANE; CARBON MOLECULAR SIEVE MEMBRANES; CMS MEMBRANES; FIELD EMISSION SCANNING ELECTRON MICROSCOPY; GAS PERMSELECTIVITY; HYDROGEN SEPARATION; ISOPROPYL ALCOHOLS; NUCLEATION GROWTH; PERMSELECTIVITIES; PHASE METHODS; PHASE-INVERSION METHOD; POLYMER AGGREGATES; PYROLYSIS TEMPERATURE; SPINODALS; THERMAL PROPERTIES; WET METHOD;

AGGLOMERATION; COALESCENCE; COATINGS; DEWATERING; FIELD EMISSION; FIELD EMISSION MICROSCOPES; MOLECULAR SIEVES; PURIFICATION; PYROLYSIS; SCANNING ELECTRON MICROSCOPY; SIEVES; SOLENOIDS; SPIN DYNAMICS; THERMODYNAMIC PROPERTIES; THERMOGRAVIMETRIC ANALYSIS; VACUUM;

GAS PERMEABLE MEMBRANES;

EID: 74449093068     PISSN: 03603199     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijhydene.2009.12.069     Document Type: Article

References (37)

1. Rosen M.A., and Scott D.S. Comparative efficiency assessment for a range of hydrogen production processes. Int J Hydrogen Energy 23 (1998) 631-640
2. Ashokkumar M. An overview on semiconductor particulate systems for photo production of hydrogen. Int J Hydrogen Energy 23 (1998) 427-438
3. Shiga H., Shinda K., Hagiwara K., Tsutsumi A., Sakurai M., Yoshida K., et al. Large scale hydrogen production from biogas. Int J Hydrogen Energy 23 (1998) 653-659
4. Bilge Y., and Mujid S.K. Efficiency of hydrogen production systems using alternative nuclear energy technologies. Int J Hydrogen Energy 31 (2006) 77-92
5. Manzolini G., and Tosti S. Hydrogen production from ethanol steam reforming: energy efficiency analysis of traditional and membrane processes. Int J Hydrogen Energy 33 (2008) 5571-5582
6. Shirasaki Y., Tsuneki T., Ota Y., Yasuda I., Tachibana S., Nakajima H., et al. Development of membrane reformer system for highly efficient hydrogen production from natural gas. Int J Hydrogen Energy 34 (2009) 4482-4487
7. Salemme L., Menna L., and Simeone M. Analysis of the energy efficiency of innovative ATR-based PEM fuel cell system with hydrogen membrane separation. Int J Hydrogen Energy 34 (2009) 6384-6392
8. Shao L., Lau C.H., and Chung T.S. A novel strategy for surface modification of polyimide membranes by vapor-phase ethylenediamine (EDA) for hydrogen purification. Int J Hydrogen Energy 34 (2009) 8716-8722
9. Sircar S., and Golden T.C. Purification of hydrogen by pressure swing adsorption. Sep Sci Technol 35 (2000) 667-687
10. Cheng Y.S., Pena M.A., Fierro J.L., Hui D.C.W., and Yeung K.L. Performance of alumina, zeolite, palladium, Pd-Ag alloy membranes for hydrogen separation from town gas mixture. J Membr Sci 204 (2002) 329-340
11. Uemiya S. Brief review of steam reforming using a metal membrane reactor. Top Catal 29 (2004) 79-84
12. Koros W.J., and Mahajan R. Pushing the limits on possibilities for large scale gas separation: which strategies?. J Membr Sci 175 (2000) 181-196
13. Itoh N., and Haraya K. A carbon membrane reactor. Catal Today 56 (2000) 103-111
14. Saufi S.M., and Ismail A.F. Fabrication of carbon membranes for gas separation- a review. Carbon 42 (2004) 241-259
15. Geiszler V.C., and Koros W.J. Effects of polyimide pyrolysis conditions on carbon molecular sieve membrane properties. Ind Eng Chem Res 35 (1996) 2999-3003
16. Hayashi J., Yamamoto M., Kusakabe K., and Morooka S. Effect of oxidation on gas permeation of carbon molecular sieving membranes based on BPDA-pp'ODA polyimide. Ind Eng Chem Res 36 (1997) 2134-2140
17. Barsema J.N., Klijnstra S.D., Balster J.H., van der Vegt N.F.A., Koops G.H., and Wessling M. Intermediate polymer to carbon gas separation membranes based on matrimid PI. J Membr Sci 238 (2004) 93-102
18. 4 separations. Sep Purif Technol 14 (1998) 27-39
19. Shiflett M.B., and Foley H.C. On the preparation of supported nanoporous carbon membranes. J Membr Sci 179 (2000) 275-282
20. Shiflett M.B., and Foley H.C. Ultrasonic deposition of high selectivity nanoporous carbon membranes. Science 285 (1999) 1902-1905
21. Hayashi J., Mizuta H., Yamamoto M., Kusakabe K., and Morooka S. Pore size control of carbonized BPTA-pp' ODA polyimide membranes by chemical vapour deposition of carbon. J Membr Sci 124 (1997) 243-251
22. Wang H., Zhang L., and Gavalas G.R. Preparation of supported carbon membranes from furfuryl alcohol by vapour deposition polymerization. J Membr Sci 177 (2000) 25-31
23. Fuertes A.B., and Centeno T.A. Carbon molecular sieve membranes from polyetherimide. Microporous Mesoporous Mater 26 (1998) 23-26
24. Rao P.S., Wey M.Y., Tseng H.H., Kumar I.A., and Weng T.H. A comparison of carbon/nanotube molecular sieve membranes with polymer blend carbon molecular sieve membranes for the gas permeation application. Microporous Mesoporous Mater 113 (2008) 499-510
25. Tseng H.H., Kumar I.A., Weng T.H., Lu C.Y., and Wey M.Y. Preparation and characterization of carbon molecular sieve membranes for gas separation-the effect of incorporated multi-wall carbon nanotubes. Desalination 240 (2009) 40-45
26. Acharya M., and Foley H.C. Spray coating of nanoporous carbon membranes for air separation. J Membr Sci 161 (1999) 1-5
27. Wang D., Li K., and Teo W.K. Preparation and characterization of polyetherimide asymmetric hollow fiber membranes for gas separation. J Membr Sci 138 (1998) 193-201
28. Kim I.C., Lee K.H., and Tak T.M. Preparation and characterization of integrally skinned uncharged polyethermide asymmetric nanofilteration membrane. J Membr Sci 183 (2001) 235-247
29. Suda H., and Haraya K. Gas permeation through micropores of carbon molecular sieve membranes derived from kapton polyimide. J Phys Chem B 101 (1997) 3988-3994
30. Kim Y.K., Park H.B., and Lee Y.M. Gas separation properties of carbon molecular sieve membranes derived from polyimide/polyvinylpyrrolidone blends: effect of the molecular weight of polyvinylpyrrolidone. J Membr Sci 251 (2005) 159-167
31. Zhang X., Hu H., Zhu Y., and Zhu S. Effect of carbon molecular sieve on phenol formaldehyde novolac resin based carbon membranes. Sep Purif Technol 52 (2006) 261-265
32. Rutherford S.W., and Do D.D. Review of time lag permeation technique as a method for characterization of porous media and membranes. Adsorption 3 (1997) 283-312
33. Krevelen D.W. Properties of polymers (1990), Elsevier Science Pub, New York
34. Wang D. 1996. Polyrthersulfone hollow fiber gas separation membranes prepared from solvent systems containing nonsolvent-additives. Ph.D Thesis, National University of Singapore.
35. Kneifel K., and Peinemann K.V. Preparation of hollow fiber membranes from polyetherimide for gas separation. J Membr Sci 65 (1992) 295-307
36. Ekiner O.M., and Vassilatos G. Polyaramide hollow fibers for hydrogen/methane separation- spinning and properties. J Membr Sci 53 (1990) 259-273
37. Pinnau I., and Koros W.J. Structures and gas separation properties of asymmetric polysulfone membranes made by dry, wet an dry/wet inversion. J Appl Polym Sci 43 (1991) 1491-1502