Corrosion behaviour of nitrogen ion implanted AISI type 304L stainless steel in nitric acid medium

Corrosion Science

Volumn 52, Issue 1, 2010, Pages 104-112

  Padhy, N ^a   Ningshen, S ^a   Panigrahi, B K ^a   Kamachi Mudali, U ^a  

^a INDIRA GANDHI CENTRE FOR ATOMIC RESEARCH   (India)

Author keywords

A. Stainless steel; B. AFM; B. Ion implantation; B. SIMS; C. Passive films

Indexed keywords

304L STAINLESS STEEL; AFM; ATOMIC FORCE MICROSCOPES; B. AFM; B. SIMS; CHROMIUM NITRIDE; CO-EXISTENCE; CORROSION BEHAVIOUR; CORROSION CURRENT DENSITIES; DOSE RANGE; DOSE RATE; ELECTROCHEMICAL TECHNIQUES; GRAZING INCIDENCE X-RAY DIFFRACTION; IMPLANTED SPECIMENS; ION IMPLANTED; NITROGEN ION IMPLANTATIONS; OPEN CIRCUIT POTENTIAL; PASSIVE CURRENT DENSITIES; PASSIVE FILMS; POLARIZATION RESISTANCES; POLARIZATION STUDY; SURFACE DISSOLUTION; SURFACE MORPHOLOGY ANALYSIS;

ATOMIC FORCE MICROSCOPY; CHROMIUM; CORROSIVE EFFECTS; DISSOLUTION; ELECTROCHEMICAL CORROSION; GRAIN BOUNDARIES; ION BOMBARDMENT; ION IMPLANTATION; MARTENSITIC STAINLESS STEEL; METAL RECOVERY; NITRIC ACID; NITRIDES; NITROGEN; POLARIZATION; SECONDARY ION MASS SPECTROMETRY; SURFACE MORPHOLOGY; X RAY PHOTOELECTRON SPECTROSCOPY;

STAINLESS STEEL;

EID: 74249094231     PISSN: 0010938X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.corsci.2009.08.042     Document Type: Article

References (50)

1. Raj B., and Kamachi Mudali U. Prog. Nucl. Energy 48 (2006) 283-313
2. Balbaud F., Sanchez G., Fauvet P., Santarini G., and Picard G. Corros. Sci. 42 (2000) 1685-1707
3. Kamachi Mudali U., Dayal R.K., and Gnanamoorthy J.B. J. Nucl. Mater. 203 (1993) 73-82
4. Jeng J.Y., Quayle B.E., Modern P.J., Steen W.M., and Bastow B.D. Corros. Sci. 35 (1993) 1289-1296
5. Fauvet P., Balbaud F., Robina R., Tran Q.T., Mugnier A., and Espinoux D. J. Nucl. Mater. 375 (2008) 52-64
6. Smidt F.A. Nucl. Instrum. Methods Phys. Res. B10/11 (1985) 532-538
7. Radjabov T.D. Vacuum 38 (1988) 979-985
8. Dearnaley G. Surf. Coat. Technol. 65 (1994) l-6
9. Clayton C.R. Nucl. Instrum. Methods 182/183 (1981) 865-873
10. Ashworth V., Procter R.P.M., and Grant W.A. Thin Solid Films 73 (1980) 179-188
11. Gardner P.R. Mater. Des. 8 (1987) 210-219
12. Mccafferty E., Hubler G.K., Natishan P.M., Moore P.G., Kant R.A., and Sartwell B.D. Mater. Sci. Eng. 86 (1987) 1-17
13. Stroosnijder M.F. Surf. Coat. Technol. 100-101 (1998) 196-201
14. Kamachi Mudali U., and Raj B. High Nitrogen Steel and Stainless Steel: Manufacturing, Properties and Applications (2004), Alpha Science International
15. Olefjord I., and Wegrelius L. Corros. Sci. 38 (1996) 1203-1220
16. Youssef A.A., Budzynski P., Filiks J., Kobzev A.P., and Sielanko J. Vacuum 77 (2004) 37-45
17. Daniels L.O., and Wilbur P.J. Nucl. Instrum. Methods Phys. Res. B19/20 (1987) 221-226
18. Kustas F.M., Misra M.S., and Tack W.T. Mater. Sci. Eng. 90 (1987) 407-416
19. Kamachi Mudali U., Sundararajan T., Nair K.G.M., and Dayal R.K. Mater. Sci. Forum 318-320 (1999) 531-538
20. Song Sh., Song W., and Fang Zh. Corros. Sci. 31 (1990) 395-400
21. Picard S., Memet J.B., Sabot R., Grosseau-Poussard J.L., Riviere J.P., and Meilland R. Mater. Sci. Eng. A303 (2001) 163-172
22. Hirvonen J.P., Ruck D., Yan S., Mahiout A., Torri P., and Likonen J. Surf. Coat. Technol. 74-75 (1995) 760-764
23. Martinez Orellana L., Perez F.J., and Gomez C. Surf. Coat. Technol. 200 (2005) 1609-1615
24. Chang G.S., Son J.H., Kim S.H., Chae K.H., Whang C.N., Menthe E., Rie K.-T., and Lee Y.P. Surf. Coat. Technol. 112 (1999) 291-294
25. Ziegler J.F., Biersack J.P., and Littmark U. The Stopping and Range of Ions in Solids (1985), Pergamon, New York
26. Loreenz W.J., and Mansfeld F. Corros. Sci. 21 (1981) 647-672
27. Galvel J.R. Corros. Sci. 47 (2005) 3053-3067
28. Kamachi Mudali U., Bhuvaneswaran N., Shankar P., and Raj B. Corros. Sci. 46 (2004) 2867-2892
29. Ningshen S., Kamachi Mudali U., Mukherjee P., Sarkar A., Barat P., Padhy N., and Raj B. Corros. Sci. 50 (2008) 2124-2134
30. Riviere J.P., Meheust P., Villaina J.P., Templiera C., Cahoreaua M., Abrasonis G., and Pranevicius L. Surf. Coat. Technol. 158-159 (2002) 99-104
31. Chico B., Martinez L., and Perez F.J. Appl. Surf. Sci. 243 (2005) 409-414
32. Guemmaz M., Moser A., Grob J.J., and Stuck R. Surf. Coat. Technol. 100-101 (1998) 353-357
33. Arnaud Y., Brunel M., De Becdelievre A.M., Romand M., Thevenard P., and Robelet M. Appl. Surf. Sci. 26 (1986) 12-26
34. Wang J., Xiong J., Peng Q., Fan H., Wang Y., Li G., and Shen B. Mater. Charact. 60 (2009) 97-203
35. Mottu N., Vayer M., and Erre R. Surf. Coat. Technol. 183 (2004) 165-173
36. Blawert C., Kalvelage H., Mordike B.L., Collins G.A., Short K.T., Jiraskova Y., and Schneeweiss O. Surf. Coat. Technol. 136 (2001) 181-187
37. Pelletier H., Mille P., Cornet A., Gorb J.J., Stoquert J.P., and Muller D. Nucl. Instrum. Methods Phys. Res. B148 (1999) 824-829
38. Aggarwal S., Goelt A.K., Mohindra R.K., Ghosh P.K., and Bhatnagar M.C. Thin Solid Films 237 (1994) 175-180
39. Chayahara A., Nakashima S., Hashimoto M., Sasaki T., Kurokawa M., Kiyama S., and Satou M. Nucl. Instrum. Methods Phys. Res. B59/60 (1991) 893-896
40. Leutenecker R., Wagner G., Louis T., Gonser U., Guzman L., and Molinari A. Mater. Sci. Eng. A115 (1989) 229-244
41. Marcus P., and Bussell M.E. Appl. Surf. Sci. 59 (1992) 7-21
42. Lee J.H., Park J.W., Lee J.S., Sohn C.W., and Kil J.K. Surf. Coat. Technol. 196 (2005) 353-357
43. K. Osozawa, N. Okato, in: Proceedings of the USA-Japan Seminar, Passivity and its Breakdown on Iron and Iron-based Alloys, NACE, 1976, pp. 135-139.
44. Olosson C.A. Corros. Sci. 37 (1995) 467-479
45. Cooney E.C., and Potter D.I. Corros. Sci. 34 (1993) 2007-2018
46. Jargelius-Pettersson R.F.A. Corros. Sci. 41 (1999) 1639-1664
47. Kamachi Mudali U., Dayal R.K., Gill T.P.S., and Gnanmoorthy J.B. Werkst. Corros. 37 (1986) 637-643
48. R.C. Newman, Y.C. Lu, R. Bandy, C.R. Clayton, in: Proceedings of Ninth International Conference on Metallic Corrosion, vol. 4, 1984, pp. 394-399.
49. Sadough Vanini A., Audouard J.P., and Marcus P. Corros. Sci. 36 (1994) 1824-1835
50. Ningshen S., Kamachi Mudali U., Amarendra G., and Raj B. Corros. Sci. 51 (2009) 322-329