Improvement in gas permeability of biaxially stretched PET films blended with high barrier polymers: The role of chemistry and processing conditions

European Polymer Journal

Volumn 46, Issue 2, 2010, Pages 226-237

  Özen, Ilhan ^a,e   Bozoklu, Gülay ^b   Dalgiçdir, Cahit ^c   Yücel, Orçun ^d   Ünsal, Emre ^d   Çakmak, Mükerrem ^d   Menceloǧlu, Yusuf Ziya ^e  

^a ERCIYES UNIVERSITY   (Turkey)

^b DIF   (France)

^c KOÇ UNIVERSITY   (Turkey)

^d The University of Akron   (United States)

^e SABANCI UNIVERSITY   (Turkey)

Author keywords

Compatibilization; MXD6; Oxygen gas permeability; PET blends

Indexed keywords

BARRIER POLYMERS; BARRIER PROPERTIES; BIAXIAL STRETCHING; CHARACTERIZATION TECHNIQUES; CHEMICAL ARCHITECTURE; COMPATIBILIZATION; ISOPHTHALATE; MORPHOLOGICAL ANALYSIS; OXYGEN GAS; PACKAGING INDUSTRY; PET COPOLYMERS; PET FILMS; POLY(ETHYLENE TEREPHTHALATE-CO-ISOPHTHALATE) COPOLYMERS; POLY(M-XYLENE ADIPAMIDE); PROCESSABILITY; PROCESSING CONDITION; REAL TIME MEASUREMENTS; SEM; STRESS-INDUCED CRYSTALLIZATION; THICK DISK; TRUE STRAIN; TRUE STRESS; TWIN SCREW EXTRUDERS; UNIAXIAL STRETCHING;

AROMATIC HYDROCARBONS; ASPECT RATIO; BIREFRINGENCE; CAPILLARITY; COMPATIBILIZERS; COMPUTER ARCHITECTURE; COMPUTER CONTROL SYSTEMS; COPOLYMERIZATION; DIFFERENTIAL SCANNING CALORIMETRY; ETHYLENE; GAS PERMEABILITY; GASES; MORPHOLOGY; OXYGEN; PLASMAS; POLYAMIDES; POLYBUTADIENES; POLYETHYLENE TEREPHTHALATES; RAYON; SCANNING ELECTRON MICROSCOPY; SODIUM; SPECIAL EFFECTS; TIME MEASUREMENT; XYLENE;

GAS PERMEABLE MEMBRANES;

EID: 73649128535     PISSN: 00143057     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.eurpolymj.2009.10.027     Document Type: Article

References (66)

1. Bandi S., Mehta S., and Schiraldi D.A. Polym Degrad Stabil 88 (2005) 341
2. Doudou B.B., Dargent E., and Grenet J.J. Plast Film Sheet 21 (2005) 233
3. Samios C.K., and Kalfoglou N.K. Polymer 39 16 (1998) 3863
4. Hu Y.S., Prattipati V., Mehta S., Schiraldi D.A., Hiltner A., and Baer E. Polymer 46 (2005) 2685
5. Rietsch F., Duckett R.A., and Ward I.M. Polymer 20 (1979) 1133
6. Prattipati V., Hu Y.S., Bandi S., Schiraldi D.A., Hiltner A., Baer E., et al. J Appl Polym Sci 97 (2005) 1361
7. Hu Y.S., Prattipati V., Hiltner A., Baer E., and Mehta S. Polymer 46 (2005) 5202
8. Eisenberg A., and Kim J.S. Introduction to ionomers (1998), Wiley, New York p. 267 [Chapter 9]
9. Rajagopalan P., Lim J.S., Brack H.P., Lu X., Eisenberg A., Weiss Jr. R.A., et al. J Polym Sci B Polym Phys 33 (1995) 495
10. Ward I.M., Bleackley M., Taylor D.J.R., Cail J.I., and Stepto R.F.T. Polym Eng Sci 39 (1999) 2335
11. Schiraldi D.A., Gould S.A.C., and Occelli M.L. J Appl Polym Sci 80 (2001) 750
12. Karayannidis G.P., Sideridou I.D., Zamboulis D.N., and Bikiaris D.N. J Appl Polym Sci 78 (2000) 200
13. Karayannidis G.P., Bikiaris D.N., Papageorgiou G.Z., and Pastras S.V. J Appl Polym Sci 86 (2002) 1931
14. Yu J., Li B., Lee S., and Ree M. J Appl Polym Sci 73 (1999) 1191
15. Liu R.Y.F., Hu Y.S., Hibbs M.R., Collard D.M., Schiraldi D.A., Hiltner A., et al. J Appl Polym Sci 98 (2005) 1615
16. Hu Y.S., Hiltner A., and Baer E. J Appl Polym Sci 98 (2005) 1629
17. Hernandez R.J. Plastics packaging - properties, processing, applications and regulations. 2nd ed. (2004), Hanser Publishers, Munich
18. Cakmak M. Influence of processing conditions on structure and properties of biaxially stretched engineering thermoplastics with emphasis on PET, a book chapter in "Film Processing". In: Kanai T, Campbell CA, editors. Prog. in Polym. Proc. Series, vol. 8. Hanser Publishers; 2000.
19. Liu R.Y.F., Hu Y.S., Schiraldi D.A., Hiltner A., and Baer E. J Appl Polym Sci 94 (2004) 671
20. Rhee S., and White J.L. J Polym Sci B Polym Phys 40 (2002) 1189
21. Gerlach C., Buckley C.P., and Jones D.P. Trans, I. Chem. E 76 (1998) 38
22. Gohil R.M. J Appl Polym Sci 48 (1993) 1649
23. Ellis J.W., and Picot J.J.C. Polym Sci Eng 40 (2000) 7
24. Cakmak M., White J.L., and Spruiell J.E. J Polym Eng 6 (1986) 1
25. Kit K.M., and Schultz J.M. Polym Eng Sci 35 (1995) 8
26. Wu W., Wagner M.H., Qian Q., Pu W., and Kheirandish S. J Appl Polym Sci 101 (2006) 1309
27. Yeo J.H., Lee C.H., Park C., Lee K., Nam J., and Kim S.W. Adv Polym Technol 20 3 (2001) 191
28. Lee S., and Kim S. Polym Eng Sci 37 2 (1997) 463
29. Faisant J.B., Ait-Kadi A., Bousmina M., and Deschenes L. Polymer 39 (1998) 533
30. Kotek R., Pang K., Schmidt B., and Tonelli A. J Polym Sci B Polym Phys 42 (2004) 4247
31. Kong Y., and Hay J.N. Polymer 43 14 (2002) 3873
32. Valladares D., Yalcin B., and Cakmak M. Macromolecules 38 (2005) 9229
33. Koike Y., and Cakmak M. Polymer 44 (2003) 4249
34. Kanuga K., and Cakmak M. Macromolecules 38 (2005) 9698
35. Utracki L.A., Catani A.M., Bata G.L., Kamal M.R., and Tan V. J Appl Polym Sci 27 (1982) 1913
36. Utracki L.A., and Kamal M.R. Polym Eng Sci 22 (1982) 96
37. Kimura M., Porter R.S., and Salee G. J Polym Sci Polym Phys Ed 21 (1983) 367
38. Abrabams D.H. Am Dyest Rep 59 (1970) 36
39. Burget L., Prikryl J., and Ruzicka J. Faserforsch Textiltech 29 (1978) 426
40. Ingamells W., Lilou S.H., and Peters R.H. J Appl Polym Sci 26 (1981) 4087
41. Datye K.V., and Palan B.H. J Appl Polym Sci 38 (1989) 1447
42. Chisholm B.J., Sisti L., Soloveichik S., and Gillette G. Polymer 44 (2003) 1903
43. Grobe H., Nissen D., and Rossbach V. Makromol Chem 176 (1975) 2839
44. Gaona O., Kint D.P.R., Martinez de Ilarduya A., Alla A., Bou J., and Munoz-Guerra S. Polymer 44 (2003) 7281
45. Perkins W. Polym Bull 19 (1988) 397
46. Gemeinhardt G.C., Moore A.A., and Moore R.B. Polym Eng Sci 44 9 (2004) 1721
47. Feng Y., Schmidt A., and Weiss R.A. Macromolecules 29 (1996) 3909
48. Pixton M.R., and Paul D.R. In: Paul D.R., and Yampol'skii Y.P. (Eds). Polymeric gas separation membranes (1994), CRC, Boca Raton, FL 83 [Chapter 3]
49. Michaels M. Environmental assessment for food additive petition terephthalate-isophthalate polymers, "Section H" FAP 5B4455; 1999.
50. Nadkarni V.M., Shingankuli V.L., and Jog J.G. Polym Eng Sci 28 (1988) 1326
51. Kamal M.R., Sahto M.A., and Utracki L.A. Polym Eng Sci 22 (1982) 1127
52. Varma D.S., and Dhar V.K. J Appl Polym Sci 33 (1987) 1103
53. Tanrattanakul V., Hiltner A., Baer E., Perkins W.G., Massey F.L., and Moet A. Polymer 38 (1997) 2191
54. Jabarin SA. A course of PET technology: properties and processing. The University of Toledo; 2000.
55. Brace J. The lecture note of transport in plastics. The University of Toledo; 2006.
56. Jabarin S.A. Polym Eng Sci 24 (1984) 376
57. Chandran P., and Jabarin S.A. Adv Polym Technol 12 2 (1993) 119
58. Gorlier E., Haudin J.M., and Billon N. Polymer 42 (2001) 9541
59. Blundell D.J., MacKerron D.H., Fuller W., Mahendrasingam A., Martin C., and Oldman R.J. Polymer 37 15 (1996) 3303
60. Blundell D.J., Oldman R.J., Fuller W., Mahendrasingam A., Martin C., and MacKerron D.H. Polym Bull (Berl) 42 3 (1999) 357
61. Mahendrasingam A., Martin C., Fuller W., Blundell D.J., Oldman R.J., and MacKerron D.H. Polymer 41 (2000) 1217
62. Sen TZ, Toki S, Cakmak M. In: 59th annual technical conference, society of plastic engineers, vol. 2; 2001. p. 1510.
63. Taner SZ. PhD dissertation. University of Akron; 2003.
64. Hassan M. PhD dissertation. University of Akron; 2004.
65. Middleton A.C., Duckett R.A., Ward I.M., Mahendrasingam A., and Martin C. J Appl Polym Sci 79 10 (2001) 1825
66. Mulligan J., and Cakmak M. Macromolecules 38 6 (2005) 2333