Effects of temperature and shot peening on S-N behavior of a PM Ni-base superalloy UDIMET 720

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 35, Issue 13, 2004, Pages 1007-1016

  Luo, J ^a   Bowen, P ^a  

^a UNIVERSITY OF BIRMINGHAM   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

CRACK NUCLEATION; CURVE BEHAVIORS; CYCLIC SOFTENING; EFFECTS OF TEMPERATURE; ENVIRONMENTAL ATTACK; FOUR-POINT BENDING; LOAD RATIO; NI-BASE SUPERALLOYS; ROOM TEMPERATURE; S-N CURVE; SURFACE CONDITIONS; UDIMET 720;

BENDING TESTS; CRACK CLOSURE; NUCLEATION; POWDER METALLURGY; SHOT PEENING;

SUPERALLOYS;

EID: 73449123725     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-004-1004-9     Document Type: Article

References (49)

1. J.F. Knott: Fracture and Fracture Mechanics, Case Studies: 2nd Nat. Conf. on Fracture, R.B. Tait and G.G. Garrett, eds., 26-27 November 1984, Johannesburg, UK, Pergamon Press, Oxford, England, 1985, pp. 297-315.
2. T. Denda, P.L. Bretz, and K. Tien: Metall. Trans. A, 1992, vol. 23A, pp. 519-26.
3. D. Fournier and A. Pineau: Metall. Trans. A, 1977, vol. 8A, pp. 1095-1105.
4. S.D. Antolovich, S. Liu, and R. Baur: Metall. Trans. A, 1981, vol. 12A, pp. 473-81.
5. V. Singh, M. Sundararaman, W. Chen, and R.P. Wahi: Metall. Trans. A, 1991, vol. 22A, pp. 499-506.
6. M. Sundararaman, W. Chen, V. Singh, and R.P. Wahi: Acta Metall. Mater., 1990, vol. 38, pp. 1813-22.
7. B.A. Lerch and V. Gerold: Metall. Trans. A, 1987, vol. 18A, pp. 2135-41.
8. R.E. Stoltz and A.G. Pineau: Mater. Sci. Eng., 1978, vol. 34, pp. 275-84.
9. L.G. Fritzeneier and G.K. Tien: Acta Metall., 1988, vol. 36 (2), pp. 275-82.
10. S. Bashir, P. Taupin, and S.D. Antolovich: Metall. Trans. A, 1979, vol. 10A, pp. 1481-90.
11. A. Saxen and S.D. Antolovich: Metall. Trans. A, 1975, vol. 6A, pp. 1809-28.
12. B. Lerch and V. Gerold: Acta Metall., 1985, vol. 33 (9), pp. 1709-16.
13. H.F. Merrick: Metall. Trans. A, 1974, vol. 5, pp. 891-97.
14. C.H. Wells and C.P. Sullivan: Trans. ASM, 1964, vol. 57, pp. 841-55.
15. C.H. Wells and C.P. Sullivan: Trans. ASM, 1965, vol. 58, pp. 391-402.
16. W. Renzhi: Fatigue Eng. Mater. Struct., 1979, vol. 2, pp. 413-18.
17. G.H. Farrahi, J.L. Lebrun, and D. Couratin: Fatigue Fract. Eng. Mater. Struct., 1995, vol. 18 (2), pp. 211-20.
18. Y. Mutoh, G.H. Fair, B. Noble, and R.B. Waterhouse: Fatigue Fract. Eng. Mater. Struct., 1987, vol. 10 (4), pp. 261-72.
19. F.S. Ahmed: Modelling, Measurement and Control C: Ener., Chem., Earth, Environ. Biomed. Problems, 1995, vol. 47 (1-3), pp. 29-42.
20. J.F. Janowak and A. Alagarsamy: AFS Trans., 1990, vol. 98, pp. 511-18.
21. J.L. Doong, J.R. Hwang, and H.S. Chen: J. Mater. Sci., 1986, vol. 21,pp. 871-78.
22. D.W. Becker and J.A. Psihoyious: ASME?Int. Combus. Engine Div. (publ.) ICE, 05-07 October 1986, Oakbrook, IL, USA, ASME Press, NY, USA, 1986, vol. 1, pp. 59-64.
23. K. Saruki, A. Yamada, and K. Ogawa: J. Soc. Mater. Jpn., 1988, vol. 37 (417), pp. 631-36.
24. H. Suzuki, A. Magata, W.M. Gong, and Y. Ito: Trans. Jpn. Soc. Mech. Eng., Part A, 1995, vol. 61 (591), pp. 2349-54.
25. H. Suzuki, K. Ito, S. Nishino, S, Yamada, and M. Moriya: Trans. Jpn. Soc. Mech. Eng., Part A, 1996, vol. 62 (595), pp. 627-31.
26. L.N. Ojha and M.C. Sharma: Fatigue 96-Proc. Int. Fatigue Congr., Berlin, G. Lutjering, and H. Nowack, eds., 6-10 May 1996, Berlin, Germany, Pergamon, Tarrytown, NY, USA, 1996, vol. 2, pp. 1433-36.
27. D.R. Chang, D.D. Krueger, and R.A. Sprague: Superalloys 1984-Proc. 5th Int. Symp. on Superalloys, M. Gell, C.S. Kortovich, R.H. Bricknell,W.B. Kent, and J.F. Radavich, eds., 7-11 October 1984, Seven Springs, PA, USA, TMS-AIME, Warrendale, PA, USA, 1984, pp. 245-73.
28. P. Forget, M. Jeandin, and A. Lyoret: EUROMAT 93-3rd Eur. Conf. on Advanced Materials and Processes, 8-10 June 1993, P.K.L. 20, Paris. Journal De Physique IV, Colloque C7, vol. 2, November 1993, pp. 322-26.
29. H. Qi and X.R. Jing: Int. J. Fatigue, 1991, vol. 13 (4), pp. 322-26.
30. F.E. Sczerzenie and G.E. Maurer: Superalloys 1984-Proc. 5th Int. Symp. on Superalloys, M. Gell, C.S. Kortovich, R.H. Bricknell, W.B. Kent, and J.F. Radavich, eds., 7-11 October 1984, Seven Springs, PA, USA,TMS-AIME, Warrendale, PA, USA, 1984, pp. 575-82.
31. K.R. Bain, M.L. Gambone, J.M. Hyzak, and M.C. Thomas: Superalloys 1988?Proc. 6th Int. Symp. on Superalloys, D.N. Duhl, G. Maurer, S.Antolovich, C. Lund, and S. Reichman, eds., 18-22 September 1988, Champion, PA, USA, TMS-AIME, Warrendale, PA, USA, 1988, pp. 13-22.
32. P.S. Prevey: in Shot Peening Theory and Application, J.S. Eckersley and J. Champeigne, eds., IITT-International, Gournay-Sur-Marne,France, 1991, pp. 81-93.
33. J. Luo and P. Bowen: Int. J. Fatigue, 2004, vol. 26, pp. 113-24.
34. P.A.S. Reed, W.F. Gale, and J.E. King: Mater. Sci. Technol., 1993,vol. 9, pp. 281-87.
35. J.E. King: Fatigue Eng. Mater. Struct., 1981, vol. 4, pp. 311-20.
36. J.E. King: Met. Sci., 1982, vol. 16, pp. 345-55.
37. H. Ghonem, T. Nicholas, and A. Pineau: ASTM-AD Publ., 1991, vol. 21, pp. 1-18.
38. H. Ghonem and D. Zheng: Mater. Sci. Eng., 1992, vol. 150A, pp. 151-60.
39. D. Zheng and H. Ghonem: Metall. Trans. A, 1992, vol. 23A, pp. 3169-71.
40. H. Teranishi and A.J. McEvily: Metall. Trans. A, 1979, vol. 10A, pp. 1806-08.
41. C.E. Shamblen and D.R. Chang: Metall. Trans. B, 1985, vol. 16B, pp. 775-84.
42. S. Bashir and S.D. Antolovich: Superalloys 1984-Proc. 5th Int. Symp. on Superalloys, M. Gell, C.S. Kortovich, R.H. Bricknell, W.B. Kent, and J.F. Radavich, eds., 7-11 October 1984, Seven Springs, PA, USA, TMS- AIME, Warrendale, PA, USA, 1984, pp. 295-307.
43. P. Woollin and J.F. Knott: Fatigue 87-3rd Int. Conf. on Fatigue and Fatigue Thresholds, R.O. Ritchie and E.A. Starke, eds., EMAS, Charlottesville, VA, 1987, pp. 1087-99.
44. J. Luo and P. Bowen: Acta Mater., 2003, vol. 51, pp. 3521-35.
45. P. Neumann: Acta Metall., 1974, vol. 22, pp. 1167-78.
46. J.F. Knott: Fatigue Crack Growth: 30 Years of Progress-Proc. Conf. on Fatigue Crack Growth, R.A. Smith, ed., Pergamon, Cambridge, United Kingdom, 1984, pp. 31-52.
47. D.L. Davidson and S.J. Hudak, Jr.: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2247-57.
48. J. Luo and P. Bowen: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3719-30.
49. J. Luo and P. Bowen: Acta Mater., 2003, vol. 51, pp. 3537-50.