Wear and friction behavior of sand cast brake rotor made of A359-20 vol% SiC particle composites sliding against automobile friction material

Tribology International

Volumn 43, Issue 3, 2010, Pages 544-553

  Daoud, A ^a   Abou El khair, M T ^a  

^a AWelding and NDT Laboratory   (Egypt)

Author keywords

Aluminum matrix composite; Dry sliding wear; Friction material; Sand cast brake rotor

Indexed keywords

ALUMINUM MATRIX COMPOSITES; APPLIED LOADS; BRAKE ROTORS; COMPOSITE DISC; DRY SLIDING; DRY SLIDING WEAR; ENERGY DISPERSIVE X-RAY; FRICTION COEFFICIENTS; LOAD RANGE; PIN ON DISC; ROTATING DISC; SEM; SIC PARTICLES; SLIDING SPEED; SPEED RANGE; WEAR AND FRICTION; WEAR BEHAVIORS; WEAR DEBRIS; WEAR RATES; WORN SURFACE;

ALUMINUM; BRAKES; CAST IRON; DEBRIS; FRICTION MATERIALS; PROTECTIVE COATINGS; SAND; SCANNING ELECTRON MICROSCOPY; SILICON CARBIDE; SPEED; TRIBOLOGY; WEAR OF MATERIALS; WEAR RESISTANCE; X RAY DIFFRACTION;

FRICTION;

EID: 73349128080     PISSN: 0301679X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.triboint.2009.09.003     Document Type: Article

References (30)

1. Chen R., Iwabuchi A., Shimizu T., Shin H.S., and Mifune H. The sliding wear resistance behavior of NiAl and SiC particles reinforced aluminum alloy matrix composites. Wear 213 (1997) 175-184
2. Iwai Y., Yoneda H., and Honda T. Sliding wear behavior of SiC whisker-reinforced aluminum composite. Wear 594-602 (1995) 181-183
3. Hunt W.H. Applications of metal matrix composites. Encyclopedia of Materials: Science and Technology (2001) 5442-5447
4. Walker J.C., Rainforth W.M., and Jones H. Lubricated sliding wear behavior of aluminum alloy composites. Wear 259 (2005) 577-589
5. Basavarajapp S., Chandramohan G., Mahadevan A., Thangavelu M., Subramanian R., and Gopalakrishnan P. Influence of sliding speed on the dry sliding wear behavior and the subsurface deformation on hybrid metal matrix composite. Wear 262 (2007) 1007-1012
6. Gómez de Salazar J.M., and Barren M.I. Influence of heat treatments on the wear behavior of an AA6092/SiC25p composite. Wear 256 (2004) 286-293
7. Mondal D.P., Das S., Rao R.N., and Singh M. Effect of SiC addition and running-in-wear on the sliding wear behavior of Al-Zn-Mg aluminum alloy. Material Science and Engineering A 402 (2005) 307-319
8. Shorowordi K.M., Haseeb A.S.M.A., and Celis J.P. Velocity effects on the wear, friction and tribochemistry of aluminum MMC sliding against phenolic brake pad. Wear 256 (2004) 1176-1181
9. Straffelini G., Pellizzari M., and Molinari A. Influence of load and temperature on the dry sliding behavior of Al-based metal-matrix-composites against friction material. Wear 256 (2004) 754-763
10. Uyyuru R.K., Surappa M.K., and Brusethaug S. Effect of reinforcement volume fraction and size distribution on the tribological behavior of Al-composite/brake pad tribo-couple. Wear 260 (2006) 1248-1255
11. Natarajan N., Vijayarangan S., and Rajendran I. Wear behavior of A356/25SiCp aluminum matrix composites sliding against automobile friction material. Wear 261 (2006) 812-822
12. Zhang S., and Wang F. Comparison of friction and wear performances of brake material dry sliding against two aluminum matrix composites reinforced with different SiC particles. Journal of Material Processing Technology 182 (2007) 122-127
13. Sallit I., Richard C., Adam R., and Robbe-Valloire F. Characterization methodology of a tribological couple: metal matrix composites/brake pads. Material Characterizations 40 (1998) 169-188
14. Jang H., Lee J.S., and Fash J.W. Compositional effects of the brake friction material on creep groan phenomena. Wear 251 (2001) 1477-1483
15. Ravikiran A. Effect of pin specimen contact length in the sliding direction on tribological results of pin-on-disc tests. Tribology Letter 4 (1998) 49-58
16. Cueva G., Sinatora A., Guesser W.L., and Tschiptschin A.P. Wear resistance of cast irons used in brake disc rotors. Wear 255 (2003) 1256-1260
17. Blau P.J., Jolly B.C., Qu J., Peter W.H., and Blue C.A. Tribological investigation of titanium-based materials for brakes. Wear 263 (2007) 1202-1211
18. CRC handbook of chemistry and physics, 73rd ed. June 1, 1992.
19. Jokinen A, Anderson P. Tribological properties of PM aluminum alloy matrix composites. In: Annul powder metallurgy conference. Proceeding, metal powder industries federation, American Powder Metallurgy Institute: Princeton, NJ; 1990. p. 517-30.
20. Sawla S., and Das S. Combined effect of reinforcement and heat treatment on the two body abrasive wear of aluminum alloy and aluminum particle composites. Wear 257 (2004) 555-561
21. Song W.Q., Krauklis P., Mouritz A.P., and Bandyopadhyay S. The effect of thermal ageing on the abrasive wear behavior of age-hardening 2014 Al/SiC and 6061 Al/SiC composites. Wear 185 (1995) 125-130
22. Straffelini G. A simplified approach to the adhesive theory of friction. Wear 249 (2001) 79-85
23. Howell G.J., and Ball A. Dry sliding wear of particulate-reinforced aluminum alloys against automobile friction materials. Wear 379-390 (1995) 181-183
24. Jang H., Koa K., Kim S.J., Basch R.H., and Fash J.W. The effect of metal fibers on the friction performance of automotive brake friction materials. Wear 256 (2004) 406-414
25. Anderson AE. Friction excited oscillation. Link Brake Technology Report-FEV1, 1995.
26. Chapman T.R., Niesz D.E., Fox R.T., and Fawcett T. Wear-resistant aluminum-boron-carbide cermets for automotive brake applications. Wear 236 (1999) 81-87
27. Persson B.N.J. Sliding friction: physical principles and applications. 2nd ed. (2000), Springer, Berlin p. 45-91
28. Jang H., Ko K., Kim S.J., Basch R.H., and Fash J.W. The effect of metal fibers on the friction performance of automotive brake friction materials. Wear 256 (2004) 406-414
29. Rohatgi P.K., Riu Y., and Ray S. Friction lubrication and wear technology (1992), American Society for Metals, Metals Park, OH p. 115
30. Lasa G.L., and Rodriguez-Ibabe J.M. Wear behavior of eutectic and hypereutectic Al-Si-Cu-Mg casting alloys tested against a composite brake pad. Material Science and Engineering A 363 (2003) 193-202