Characterisation and engineering properties of Troll Clay

Characterisation and Engineering Properties of Natural Soils

Volumn 3-4, Issue , 2007, Pages 1939-1972

  Lunne, T ^a   Long, M ^b   Uzielli, M ^a  

^a NORWEGIAN GEOTECHNICAL INSTITUTE   (Norway)

^b UNIVERSITY COLLEGE DUBLIN   (Ireland)

Author keywords

[No Author keywords available]

Indexed keywords

CONCRETE GRAVITY; ENGINEERING CHARACTERISTICS; ENGINEERING PROPERTIES; GLACIAL TILL; GROUND CONDITIONS; IN-SITU; MARINE CLAYS; SOIL PROPERTY; THICK DEPOSIT; THIN-WALLED; WIDE AREA;

CLAY DEPOSITS; SOILS;

SOIL TESTING;

EID: 72849133765     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (35)

1. Amundsen, T., Lunne, T., Christophersen, H.P., Bayne, J.M. & Barnwell, C.L. 1985. Advances deep-water soil investigation at the Troll East Field. Advances in underwater technology and offshore engineering, Vol. 3 offshore site investigation, SUT 1985, 627'.7 TC0000.
2. Andresen, A., Berre, T., Kleven, A. & Lunne, T. 1979. Procedures used to obtain soil parameters for foundation engineering in the North Sea. Marine Geotechnology, Vol. 3, No. 3, pp 210-226.
3. Andersen, E.S. 1989. En sedimentologisk og geofysisk studie av Sen-Kvartære og Holocene sedimenter i Norskerenna, Troll Øst. Cand.scient - oppgave i geologi. Institutt for geologi, Universitetet i Oslo, 1989.
4. Andersen, K.H., Kleven, A. & Heien, D. 1988. Cyclic soil data for design of gravity structures. ASCE Jnl. of Geo. Eng., Vol. 114, No. 5, pp 517-539.
5. Andersen, K.H., Dyvik, R., Kikuchi,Y. & Skomedal, E. 1992. Clay behaviour under irregular cyclic loading. Session C7, Proc. BOSS'92.
6. Baligh, M.M. & Levadoux, J.N. 1986. Consolidaiton after undrained piezocone penetration. II: Interpretation. ASCE. Journal of Geotechnical Engineering, Vol. 112, No. GT7, pp. 727-745.
7. Berre, T. 1982. Triaxial testing at the Norwegian Geotechnical Institute. Geotechnical Testing Journal, Vol. 5, No. 1/2 pp 3-17. Also publ. in: Norwegian Geotechnical Institute, Publication, 134, 1981, pp 7-23.
8. Bjerrum, L. & Landva, A. 1966. Direct simple shear tests on a Norwegian quick clay. Geotechnique, Vol. 16, No. 1, pp 1-20. Also publ. in: Norwegian Geotechnical Institute, Publication 70.
9. Brooker, E.W. & Ireland, H.O. 1965. Earth pressures at rest related to stress history. Canadian Geotechnical Journal, Vol. 2, No. 1, pp 1-15.
10. Burland, J.B. 1990. On the compressibility and shear strength of natural clays. 13th. Rankine Lecture, Géotechnique, 40, No. 3, 329-378.
11. By, T. & Skomedal, E.1992. Soil parameters for foundation design, Troll platform. BOSS'92. Imperial College London, July 1992.
12. Casagrande, A. 1936. The determination of the pre-consolidation load and its practical significance. Proc. ICSMFE Cambridge, Mass., Vol. 3, pp 60-64.
13. Dyvik, R. & Madshus, C. 1985. Lab measurements of Gmax using bender elements. Advances in the art of testing soil under cyclic conditions, Detroit, MI, Oct., Proc., pp 186-196.
14. Dyvik, R. & Olsen, T.S. 1989. Gmax measured in oedometer and DSS tests using bender elements. Proc. ICSMFE, Rio de Janeiro, Aug., Vol. 1, pp 39-42.Also NGI Publication, 181.
15. Green, C.D., Heijna, B. & Walker, P. 1985. An integrated approach to the investigation of new development areas. Advances in underwater technology and offshore engineering, Vol. 3 Offshore Site Investigation, SUT 1985, pp 99-120.
16. Hansen, B., Nowacki, F. & Skomedal, E. 1992. Foundation design, Troll platform. Session C7, Proc. BOSS'92, Imperial College London, July 1992.
17. Janbu, N. 1963. Soil compressibility as determined by oedometer and triaxial tests. Proc. ECSMFE, Wiesbaden, Vol. 1, pp 19-25.
18. Janbu, N. 1970. Grunnlag i geoteknikk. Tapir Forlag, Trondheim.
19. Kleven, A., Lacasse, S. & Andresen, K.H. 1986. Soil parameters for offshore foundation design. NGI Report 40013-34, 21/3/1986, Rev. 9/4/1986.
20. Lambe, T.W & Whitman, R.V. 1976. Soil Mechanics. JohnWiley, NewYork.
21. Long, M. 2003. Characterisation and engineering properties of Athlone laminated clay. Proceedings International Workshop on Characterisation and Engineering Properties of Natural Soils ("Natural Soils 2002"), NUSSingapore, December. Eds. Tan, T.S. et al. Published by Balkema, Vol. 1, pp 757-790.
22. Lunne, T. & Kleven, A. 1986. Effect of time after sampling on laboratory test results. Proc. Int. Conf. Advances in Underwater Technology, Ocean Science and Offshore Engineering, Society of Underwater Technology (SUT), Brighton UK, Vol. 6, pp 247-248.
23. Lunne, T., Berre, T. & Strandvik, S. 1997a. Sample disturbance effects in soft low plastic Norwegian clay. Conf. On Recent Developments in Soil and Pavement Mechanics, Rio de Janeiro, June 1997. Proc. pp 81-102.
24. Lunne T., Robertson, P. & Powell, J.J.M. 1997b. Cone penetration in geotechnical practice. Spon Publishers.
25. Lunne, T., Long, M. & Forsberg, C.F. 2003. Characterisation and engineering properties of Onsøy clay. Proceedings International Workshop on Characterisation and Engineering Properties of Natural Soils ("Natural Soils 2002"), NUS Singapore, December. Eds. Tan, T.S. et al. Published by Balkema, Vol. 1, pp 395-427.
26. Lunne, T. & Long, M. 2006. Review of long seabed samplers and criteria for new sampler design. Marine Geology 226 (2006) 145-165.
27. Marchetti, S. 1980. In situ tests by flat dilatometer. Proc. ASCE, Vol. 106, No. GT3, pp 299-321.
28. Moum, J. 1965. Falling drop used for grain size analysis of fine grained materials. Sedimentology, Vol. 5, No. 4, pp 343-347. Also publ. in: Norwegian Geotechnical Institute, Publication, 70, 1966.
29. Norwegian Geotechnical Institute. 1984. Norske Shell A/S 1983 Soil Investigations, Troll Block 31/2, Report No. 83219-1, February.
30. Norwegian Geotechnical Institute. 1989. Troll Phase 1, 1989 Soil Investigation, Geotechnical Report. Report 892512-3, October. Also NGI Report No. 892512-4, Appendix A6 - Geological Description.
31. Norwegian Geotechnical Institute. 1998. Fram Soil Investigation 1998. Geotechnical report to Norsk Hydro. NGI Report No. 982530-1, dated 4 December 1998.
32. Norwegian Geotechnical Institute. 2006. Geotechnical optimisation of seabed sampler. CPTtests of specially designed sleeves and tests of prototype sampler. NGI Report No. 20021239-3; 15 June 2006.
33. Sandbækken, G., Berre, T. & Lacasse, S. 1986. Oedometer testing at the Norwegian Geotechnical Institute. Consolidation of soils: Testing and Evaluation, ASTM STP 892, R.N.Yong and F.C. Townsend, Eds., 1986.
34. Svanø, G. 1982. Interpretation of ch from piezocone dissipation tests (in Norwegian). 0.81.19, Institutt for Geoteknikk, NTH.
35. Uzielli, M. Lacasse, S., Nadim, F. & Lunne, T. 2006. Uncertainty-based characterization of Troll marine clay. Proc. Sec. Int.Workshop on Characterization and Engineering Properties of Natural Soils, Singapore, Nov. 2006.