Steady-state performance and stability analysis of mixed pole machines with electromechanical torque and rotor electric power to a shaft-mounted electrical load

IEEE Transactions on Industrial Electronics

Volumn 57, Issue 1, 2010, Pages 22-34

  Abdel Khalik, Ayman S ^a   Masoud, Mahmoud I ^b   Williams, Barry W ^b   Mohamadein, Adel L ^a   Ahmed, M M ^a  

^a Alexandria University The Faculty Of Engineering   (Egypt)

^b UNIVERSITY OF STRATHCLYDE   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

CONTACT LESS; ELECTRIC POWER; ELECTRICAL EFFICIENCY; ELECTRICAL LOAD; ELECTRICAL LOADING; ELECTRICAL OUTPUT; ELECTROMAGNETIC TORQUES; ELECTROMECHANICAL TORQUE; INDEPENDENT CONTROL; MACHINE OPERATING; MECHANICAL EFFICIENCY; MODE OF OPERATIONS; OPERATING REGIONS; OPERATIONAL MODES; PERFORMANCE ASSESSMENT; ROTOR TORQUE; STABILITY ANALYSIS; STATE STABILITY; STATOR VOLTAGES; STEADY STATE PERFORMANCE; STEADY-STATE MODELS; TOTAL EFFICIENCY; TURRET SYSTEMS;

ELECTRIC LOADS; ELECTRIC POWER MEASUREMENT; MINING; POLES; SIMULATORS; SYSTEM STABILITY; TORQUE;

ELECTRIC NETWORK ANALYSIS;

EID: 72749123810     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2009.2026377     Document Type: Article

References (30)

1. E. Akpinar and P. Pillay, "Modelling and performance of slip energy," IEEE Trans. Energy Convers., vol.5, no.1, pp. 203-210, Mar. 1990.
2. N. N. Rao, G. K. Dubey, and S. S. Parbhu, "Slip-power recovery scheme employing a fully controlled convertor with half-controlled characteristics," Proc. Inst. Elect. Eng.-B, vol.130, no.1, pp. 33-38, Jan. 1983.
3. F. Liao, J. Sheng, and T. A. Lipo, "A new energy recovery scheme for doubly fed adjustable-speed induction motor drives," IEEE Trans. Ind. Appl., vol.27, no.4, pp. 728-733, Jul./Aug. 1988.
4. M. Masoud, J. Fletcher, and B. Williams, "Decoupled control of rotor torque and rotor electric power delivered in a salient-pole synchronous machine," IEEE Trans. Energy Convers., vol.20, no.1, pp. 45-52, Mar. 2005.
5. A. R. Munoz and T. A. Lipo, "Dual stator winding induction machine drive," IEEE Trans. Ind. Appl., vol.36, no.5, pp. 1369-1379, Sep./Oct. 2000.
6. O. Ojo and W. Zhiqiao, "Modeling of a dual-stator-winding induction machine including the effect of main flux linkage magnetic saturation," IEEE Trans. Ind. Appl., vol.44, no.4, pp. 1099-1107, Jul./Aug. 2008.
7. O. Ojo and W. Zhiqiao, "Speed control of a dual stator winding induction machine," in Proc. 22nd Annu. IEEE APEC, Feb./Mar. 2007, pp. 229-235.
8. K. Marouani, L. Baghli, D. Hadiouche, A. Kheloui, and A. Rezzoug, "A new PWM strategy based on a 24-sector vector space decomposition for a six-phase VSI-fed dual stator induction motor," IEEE Trans. Ind. Electron., vol.55, no.5, pp. 1910-1920, May 2008.
9. F. Barati, H. Oraee, E. Abdi, S. Shao, and R. McMahon, "The brushless doubly-fed machine vector model in the rotor flux oriented reference frame," in Proc. 34th Annu. Conf. IEEE IECON, Nov. 10-13, 2008, pp. 1415-1420.
10. E. Spooner and A. C. Williamson, "Mixed pole windings and some applications," Proc. Inst. Elect. Eng.-B, Elect. Power Appl., vol.137, no.2, pp. 89-97, Mar. 1990.
11. F. Bonnet, P.-E. Vidal, and M. Pietrzak-David, "Dual direct torque control of doubly fed induction machine," IEEE Trans. Ind. Electron., vol.54, no.5, pp. 2482-2490, Oct. 2007.
12. S. Williamson and A. C. Ferreira, "Generalised theory of the brushless doubly-fed machine. Part 1. Analysis," Proc. Inst. Elect. Eng.-Elect. Power Appl., vol.144, no.2, pp. 111-122, Mar. 1997.
13. S. Williamson and A. C. Ferreira, "Generalised theory of the brushless doubly-fed machine. Part 2. Analysis," Proc. Inst. Elect. Eng.-Elect. Power Appl., vol.144, no.2, pp. 123-129, Mar. 1997. (Pubitemid 127754620)
14. A. R. W. Broadway and L. Burbridge, "Self-cascaded machine: A lowspeed motor or high-frequency brushless alternator," Proc. Inst. Elect. Eng., vol.117, no.7, pp. 1277-1290, Jul. 1970.
15. A. R. W. Broadway and S. C. F. Tan, "Brushless stator-controlled synchronous-induction machine," Proc. Inst. Elect. Eng., vol.120, no.8, pp. 860-866, Aug. 1973.
16. R. E. Betz and M. G. Jovanovic, "Theoretical analysis of control properties for the brushless doubly fed reluctance machine," IEEE Trans. Energy Convers., vol.17, no.3, pp. 332-339, Sep. 2002.
17. M. G. Jovanovic, Y. Jian, and E. Levi, "Encoderless direct torque controller for limited speed range applications of brushless doubly fed reluctance motors," IEEE Trans. Ind. Appl., vol.42, no.3, pp. 712-722, May/Jun. 2006.
18. E. M. Schulz and R. E. Betz, "Optimal rotor design for brushless doubly fed reluctance machines," in Conf. Rec. 38th IEEE IAS Annu. Meeting, Oct. 2003, vol.1, pp. 256-261.
19. A. L. Mohamadein, M. M. Ahmed, and M. M. El-Daba, "Mixed-pole reluctance machine with ring-coils on rotor poles (a novel rotor version)," in Proc. IEEE IEMDC, 2001, pp. 705-710.
20. J. Poza, E. Oyarbide, D. Roye, and M. Rodriguez, "Unified reference frame dq model of the brushless doubly fed machine," Proc. Inst. Elect. Eng.-Elect. Power Appl., vol.153, no.5, pp. 726-734, Sep. 2006.
21. A. C. Ferreira and S. Williamson, "Time-stepping finite-element analysis of brushless doubly fed machine taking iron loss and saturation into account," IEEE Trans. Ind. Appl., vol.35, no.3, pp. 583-588, May/Jun. 1999.
22. P. C. Roberts, R. A. McMahon, P. J. Tavner, J. M. Maciejowski, and T. J. Flack, "Equivalent circuit for the brushless doubly fed machine (BDFM) including parameter estimation and experimental verification," Proc. Inst. Elect. Eng.-Elect. Power Appl., vol.152, no.4, pp. 933-942, Jul. 2005.
23. A. Abdel-Khalik, M. I. Masoud, A. L. Mohamadein, B. W. Williams, and M. Magdy, "Control of rotor torque and rotor electric power of a shaft mounted electrical load, in a mixed pole machine," IET Elect. Power Appl. J., vol.3, no.4, pp. 265-278, Jul. 2009.
24. A. Abdel-Khalik, M. I. Masoud, A. L. Mohamadein, B. W. Williams, and M. Magdy, "Performance evaluation of mixed pole machines with electromechanical torque and rotor electric power," in Proc. XVIII ICEM, Vilamoura, Portugal, Sep. 6-9, 2008, pp. 1-6.
25. H. A. Toliyat, "Recent advances and applications of power electronics and motor drives-Electric machines and motor drives," in Proc. 34th Annu. Conf. IEEE IECON, Nov. 10-13, 2008, pp. 34-36.
26. B. K. Bose, "Power electronics and motor drives recent progress and perspective," IEEE Trans. Ind. Electron., vol.56, no.2, pp. 581-588, Feb. 2009.
27. R. A. McMahon, P. C. Roberts, X. Wang, and P. J. Tavner, "Performance of BDFM as generator and motor," Proc. Inst. Elect. Eng.-Elect. Power Appl., vol.153, no.2, pp. 289-299, Mar. 2006.
28. B. Gorti, G. Alexander, and R. Spée, "Power balance consideration for brushless doubly-fed machines," IEEE Trans. Energy Convers., vol.11, no.4, pp. 687-692, Dec. 1996.
29. E. Spooner and A. C.Williamson, "Compliant-core reluctance machines," Proc. Inst. Elect. Eng.-B, vol.137, no.2, pp. 99-110, Mar. 1990.
30. P. C. Krause, Analysis of Electric Machinery. New York: McGraw-Hill, 1986.