A comparative study on erosion characteristics of red mud filled bamboo-epoxy and glass-epoxy composites

Materials and Design

Volumn 31, Issue 4, 2010, Pages 1752-1767

  Biswas, Sandhyarani ^a   Satapathy, Alok ^a  

^a NATIONAL INSTITUTE OF TECHNOLOGY   (India)

Author keywords

Bamboo fiber; E glass fiber; Epoxy resin; Erosion; Red mud; Taguchi method

Indexed keywords

AIR JET; ALUMINA PLANTS; BAMBOO FIBERS; COMPARATIVE STUDIES; E-GLASS FIBER; E-GLASS FIBERS; EPOXY COMPOSITE; EROSION CHARACTERISTICS; EROSION TEST; EROSION WEAR; EROSION WEAR RESISTANCE; EXPERIMENTAL DESIGN; GLASS FIBER COMPOSITES; GLASS FIBER REINFORCED COMPOSITE; GLASS-EPOXY COMPOSITES; MATERIAL VARIABLES; ORTHOGONAL ARRAY; PARAMETRIC ANALYSIS; PARTICULATE-FILLED COMPOSITE; PROCESS PARAMETERS; RED MUD; SOLID PARTICLE EROSION; SYSTEMATIC EXPERIMENTATION; TAGUCHI; TEST CONDITION; WEAR RATES;

EPOXY RESINS; FIBERS; GLASS FIBERS; JETS; MECHANICAL PROPERTIES; PARAMETER ESTIMATION; RESINS; SOLID WASTES; TAGUCHI METHODS; WEAR OF MATERIALS; WEAR RESISTANCE;

BAMBOO;

ABRASION RESISTANCE; BAMBOO; EROSION; FIBERS; GLASS FIBERS; JETS; MECHANICAL PROPERTIES; POLYEPOXIDES; WEAR;

EID: 72749112281     PISSN: 02641275     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matdes.2009.11.021     Document Type: Article

References (42)

1. Wambua P., Ivens J., and Verpoest I. Natural fibres: can they replace glass in fibre reinforced plastics?. Compos Sci Technol 63 (2003) 1259-1264
2. Aziz S.H., Ansell M.P., Clarke S.J., and Panteny S.R. Modified polyester resins for natural fibre composites. Compos Sci Technol 65 (2005) 525-535
3. Rao K.M.M., and Rao K.M. Extraction and tensile properties of natural fibers: vakka, date and bamboo. Compos Struct 77 4 (2007) 288-295
4. Burguenoa R., Quagliataa M.J., Mohanty A.K., Mehtac G., Drzald L.T., and Misrae M. Load-bearing natural fiber composite cellular beams and panels. Composites Part A 35 (2004) 645-656
5. Mathur V.K. Composite materials from local resources. Construct Build Mater 20 (2006) 470-477
6. Geethammma V.G., Mathew K.T., Lakshminarayanan R., and Thomas S. Composite of short coir fibers and natural rubber: effect of chemical modification, loading and orientation of fiber. Polymer 39 (1998) 1483
7. Brahmakumar M., Pavithran C., and Pillai R.M. Coconut fibre reinforced polyethylene composites: effect of naturalwaxy surface layer of the fibre on fibre/matrix interfacial bonding and strength of composites. Compos Sci Technol 65 (2005) 563-569
8. Hand N., and Dwivedi U.K. Effect of coupling agent on abrasive wear behaviour of chopped jute fibre-reinforced polypropylene composites. Wear 261 (2006) 1057-1063
9. Gowda T.M., Naidu A.C.B., and Chhaya R. Some mechanical properties of untreated jute fabric-reinforced polyester composites. Compos Part A: Appl Sci Manufact 30 (1999) 277-284
10. Bledzki A.K., and Gassan J. Composites reinforced with cellulose based fibre. Prog Polym Sci 24 (1999) 221-274
11. Mohanty A.K., Misra M., and Drzal L.T. Sustainable bio-composites from renewable resources: opportunities and challenges in the green materials world. J Polym Environ 10 (2002) 19-26
12. Joseph S., Sreekalab M.S., Oommena Z., Koshyc P., and Thomas S. A comparison of the mechanical properties of phenol formaldehyde composites reinforced with banana fibres and glass fibres. Compos Sci Technol 62 (2002) 1857-1868
13. Roe P.J., and Ansel M.P. Jute reinforced polyester composites. J Mater Sci 20 (1985) 4015
14. Lua X., Qiu Zhang M., Zhi Rong M., Shia G., and Cheng Yang G. Self reinforced melt processable composites of sisal. Compos Sci Technol 63 (2003) 177-186
15. Baiardo M., Zini E., and Scandola M. Flax fibre-polyester composites. J Compos: Part A 35 (2004) 703-710
16. George J., Sreekala M.S., and Thomas S. A review on interface modification and characterization of natural fibre reinforced plastic composites. Ploym Eng Sci 41 9 (2002) 1471-1485
17. Valadez-Gonzales A., Cetvantes-Uc J.M., Olayo R., and Herrera Franco P.J. Effect of fibre surface treatment on the fibre-matrix bond strength of natural fibre reinforced composites. Composites, Part B 30 3 (1999) 309-320
18. Rana A.K., Mitra B.C., and Banerjee A.N. Short jute fibre-reinforced polypropylene composites: dynamic mechanical study. J Appl Polym Sci 71 (1999) 531-539
19. Manikandan Nair K.C., Diwan S.M., and Thomas S. Tensile properties of short sisal fibre reinforced polystyrene composites. J Appl Polym Sci 60 (1996) 1483-1497
20. Jacoba M., Thomasa S., and Varugheseb K.T. Mechanical properties of sisal/oil palm hybrid fiber reinforced natural rubber composites. Compos Sci Technol 64 (2004) 955-965
21. Pothana L.A., Oommenb Z., and Thomas S. Dynamic mechanical analysis of banana fiber reinforced polyester composites. Compos Sci Technol 63 2 (2003) 283-293
22. Yousif B.F., and EL-Tayeb N.S.M. Mechanical and tribological characteristics of OPRP and CGRP composites. The proceedings ICOMAST (2006), GKH Press, Melaka, Malaysia 384-387 ISBN 983-42051-1-2
23. Tong J., Arnell R.D., and Ren L.Q. Dry sliding wear behaviour of bamboo. Wear 221 (1998) 37-46
24. Tong J., Ma Y., Chen D., Sun J., and Ren L. Effects of vascular fiber content on abrasive wear of bamboo. Wear 259 (2005) 37-46
25. Hornsby P.R., Hinrichsen E., and Tarverdi K. Preparation and properties of polypropylene composites reinforced with wheat and flax straw fibres, part II. Analysis of composite microstructure and mechanical properties. J Mater Sci 32 (1997) 1009-1015
26. Pothan L.A., Thomas S., and Neelakantan N.R. Short banana fibre reinforced polyester composites: mechanical, failure and aging characteristics. J Reinf Plast Compos 16 (1997) 744
27. Hepworth D.G., Hobson R.N., Bruce D.M., and Farrent J.W. The use of unretted hemp in composite manufacture. Composites Part A 31 (2003) 1279-1283
28. Joseph P.V., Kuruvilla J., and Sabu T. Short sisal fibre reinforced polypropylene composites: the role of interface modification on ultimate properties. Compos Interface 9 2 (2002) 171-205
29. Sandhyarani B., and Satapathy A. Tribo-performance analysis of red mud filled glass-epoxy composites using Taguchi experimental design. Mater Des 30 (2009) 2841-2853
30. Agarwal B.D., and Broutman L.J. Analysis and performance of fiber composites. 2nd ed. (1990), John Wiley and Sons, Inc.
31. Ruff A.W., and Ives L.K. Measurement of solid particle velocity in erosive wear. Wear 35 1 (1975) 195-199
32. Glen S.P., and Methods Taguchi. A hands on approach (1993), Addison-Wesley, NY
33. Srivastava V.K., and Pawar A.G. Solid particle erosion of glass fiber reinforced flyash filled epoxy resin composites. Compos Sci Technol 66 (2006) 3021-3028
34. Rong M.Z., Zhang M.Q., Liu Y., Yang G.C., and Zeng H.M. The effect of fiber treatment on the mechanical properties of unidirectional sisal-reinforced epoxy composites. Compos Sci Technol 61 (2001) 1437-1447
35. Bisanda E.T.N., and Ansell M.P. The effect of silane treatment on the mechanical and physical properties of sisal-epoxy composites. Compos Sci Technol 41 (1991) 165-178
36. Sarkar B.K., Ray D., and Bose N.R. Impact fatigue behaviour of vinylester resin matrix composites reinforced with alkali treated jute fibres. Composites Part A 33 (2002) 233-241
37. Oksman K. Mechanical properties of natural fibre mat reinforced thermoplastic. Appl Compos Mater 7 (2000) 403-414
38. Sundararajan G., Roy M., and Venkataraman B. Erosion efficiency - a new parameter to characterize the dominant erosion micro-mechanism. Wear 140 (1990) 369
39. Patnaik A., Satapathy A., Mahapatra S.S., and Dash R.R. Tribo-performance of polyester hybrid composites: damage assessment and parameter optimization using Taguchi design. Mater Des 30 (2008) 57-67
40. Roy M., Vishwanathan B., and Sundararajan G. Solid particle erosion of polymer matrix composites. Wear 171 (1994) 149-161
41. Suresh A., and Harsha A.P. Study of erosion efficiency of polymers and polymer composites. Polym Test 25 (2006) 188-196
42. Montgomery D.C. Design and analysis of experiments. 5th ed. (2005), John wiley and Sons, Inc. p. 363-82