Corrosion behavior of equal-channel-angular-pressed pure magnesium in NaCl aqueous solution

Corrosion Science

Volumn 52, Issue 2, 2010, Pages 481-490

  Song, Dan ^a   Ma, AiBin ^a   Jiang, Jinghua ^a   Lin, Pinghua ^a   Yang, Donghui ^a   Fan, Junfeng ^a  

^a HOHAI UNIVERSITY   (China)

Author keywords

A. Magnesium; B. EIS; B. Polarization; C. Effects of strain; C. Pitting corrosion

Indexed keywords

A. MAGNESIUM; AS-CAST; B. EIS; C. EFFECTS OF STRAIN; CORROSION BEHAVIOR; CRYSTALLINE DEFECTS; EQUAL-CHANNEL; FINER GRAINS; IN-SITU; MASS LOSS RATE; MICROSTRUCTURE CHANGES; NACL AQUEOUS SOLUTION; NACL SOLUTION; PITTING CORROSION; POLARIZATION CURVES; PURE MAGNESIUM; PURE MG; WEATHER RESISTANCE;

CORROSIVE EFFECTS; ELECTROCHEMICAL CORROSION; GRAIN REFINEMENT; MAGNESIUM; OPEN CIRCUIT VOLTAGE; PITTING; POLARIZATION; SODIUM CHLORIDE;

CORROSION RESISTANCE;

EID: 72649100949     PISSN: 0010938X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.corsci.2009.10.004     Document Type: Article

References (39)

1. Kojima Y. Handbook Advanced Mg Technology (2000), Kallos Publishing Co., Ltd., Tokyo
2. Luo A.A. Recent magnesium alloy development for automotive powertrian application. Mater. Sci. Forum 419-422 (2003) 57-66
3. In: Avedesian M.M., and Baker H. (Eds). Mg and Mg Alloys-ASM Speciality Handbook (1999), ASM International, Ohio 38-40
4. Davis J.R. Metals Handbook-Desk Edition (1998), ASM International, Ohio p. 562
5. Segal V.M. Materials processing by simple shear. Mater. Sci. Eng. A 197 (1995) 157-164
6. Ma A., Jiang J., and Saito N. Improving both strength and ductility of a Mg alloy through a large number of ECAP passes. Mater. Sci. Eng. A 513-514 (2009) 122-127
7. Prados E., Sordi V., and Ferrante M. Tensile behaviour of an Al-4 wt.% Cu alloy deformed by equal-channel angular pressing. Mater. Sci. Eng. A 503 (2009) 68-70
8. Stolyarov V.V., Zhu Y.T., Lowe T.C., and Valiev R.Z. Microstructure and properties of pure Ti processed by ECAP and cold extrusion. Mater. Sci. Eng. A 303 (2001) 82-89
9. Chung M.-K., Choi Y.-S., and Kim J.-G. Effect of the number of ECAP pass time on the electrochemical properties of 1050 Al alloys. Mater. Sci. Eng. A 366 (2004) 282-291
10. Blyanov A., Kutnyakova J., Amirkhanova N.A., Stolyarov V.V., Valiev R.Z., Liao X.Z., Zhao Y.H., Jiang Y.B., Xu H.F., Lowe T.C., and Zhu Y.T. Corrosion resistance of ultra fine-grained Ti. Scr. Mater. 51 (2004) 225-229
11. Vinogradov A., Mimaki T., Hashimoto S., and Valiev R. On the corrosion behaviour of ultra-fine grain copper. Scr. Mater. 41 (1999) 319-326
12. Lee S., Furukawa M., Horita Z., and Landon T.G. Developing a superplastic forming capability in commercial aluminum alloy without scandium or zirconium additions. Mater. Sci. Eng. A 342 (2003) 294-301
13. Gan W.M., Zheng M.Y., Chang H., and Wang X.J. Microstructure and tensile property of the ECAPed pure magnesium. J. Alloys Compd. 470 (2009) 256-262
14. Chen B., Lin D.-L., Jin L., Zeng X.-Q., and Lu C. Equal-channel angular pressing of magnesium alloy AZ91 and its effects on microstructure and mechanical properties. Mater. Sci. Eng. A 483-484 (2009) 113-116
15. Jönsson M., Persson D., and Thierry D. Corrosion product formation during NaCl induced atmospheric corrosion of magnesium alloy AZ91D. Corros. Sci. 49 (2007) 1540-1558
16. Ambat R., Aung N.N., and Zhou W. Evaluation of microstructural effects on corrosion behaviour of AZ91D magnesium alloy. Corros. Sci. 42 (2000) 1433-1455
17. Nordlien J.H., Ono S., Masuko N., and Nisancioglu K. A TEM investigation of naturalloy formed oxide films on pure magnesium. Corros. Sci. 39 (1997) 1397-1414
18. Hara N., Kobayashi Y., Kagaya D., and Akao N. Formation and breakdown of surface films on magnesium and its alloys in aqueous solutions. Corros. Sci. 49 (2007) 166-175
19. Volovitch P., Allely C., and Ogle K. Understanding corrosion via corrosion product characterization: I. Case study of the role of Mg alloying in Zn-Mg coating on steel. Corros. Sci. 51 (2009) 1251-1262
20. Annual Book of ASTM Standards Parts 3 and 4, 1977, p. 722.
21. Valiev R.Z., and Langdon T.G. Principles of equal-channel angular pressing as a processing tool for grain refinement. Prog. Mater. Sci. 51 (2006) 881-981
22. Tan J.C., and Tan M.J. Dynamic continuous recrystallization characteristics in two stage deformation of Mg-3Al-1Zn alloy sheet. Mater. Sci. Eng. A 339 (2003) 124-132
23. Pardo A., Merino M.C., Coy A.E., Arrabal R., Viejo F., and Matykina E. Corrosion behaviour of magnesium/aluminum alloys in 3.5 wt.% NaCl. Corros. Sci. 50 (2008) 823-834
24. Song G.L., Bowles A.L., and Stjohn D.H. Corrosion resistance of aged die cast magnesium alloy AZ91D. Mater. Sci. Eng. A 366 (2004) 74-86
25. op't Hoog C., Birbilis N., and Estrin Y. Corrosion of pure Mg as a function of grain size and processing route. Adv. Eng. Mater. 6 (2008) 579-582
26. Pebere N., Riera C., and Dabosi F. Investigation of magnesium corrosion in aerated sodium sulfate solution by electrochemical impedance spectroscopy. Electrochim. Acta 35 (1990) 555-561
27. Cao C. On the impedance plane displays for irreversible electrode reactions based on the stability conditions of the steady-state-II. Two state variables besides electrode potential. Electrochim. Acta 35 (1990) 837-844
28. Cao C. On the impedance plane displays for irreversible electrode reactions based on the stability conditions of the steady-state-I. One state variable besides electrode potential. Electrochim. Acta 35 (1990) 831-836
29. Pardo A., Merino M.C., Coy A.E., Viejo F., Arrabal R., and Feliú Jr. S. Influence of microstructure and composition on the corrosion behaviour of Mg/Al alloys in chloride media. Electrochim. Acta 53 (2008) 7890-7902
30. Di Schino A., and Kenny J.M. Effects of the grain size on the corrosion behavior of refined AISI 304 austenitic stainless steels. J. Mater. Sci. Lett. 20 (2002) 1631-1634
31. Janecek M., Hadzima B., Hellmig R.J., and Estrin Y. The influence of microstructure on the corrosion properties of cu polycrystals prepared by ecap. Metall. Mater. 43 (2005) 258-271
32. Aust K.T., Erb U., and Palumbo G. Interface control for resistance to intergranular cracking. Mater. Sci. Eng. A 176 (1994) 329-334
33. Johansen N.A., Adams G.B., and Van Rysselberghe P. Anodic oxidation of aluminum, chromium, hafnium, tantalum, titanium, vanadium, and zirconium at very low current densities. J. Electrochem. Soc. 104 (1957) 339-346
34. Jönsson M., Persson D., and Leygraf C. Atmospheric corrosion of field-exposed magnesium alloy AZ91D. Corros. Sci. 50 (2008) 1406-1413
35. Park J.Y., and Lee D.N. Deformation and annealing textures of equal-channel angular pressed 1050 Al alloys strips. Mater. Sci. Eng. A 497 (2008) 395-407
36. Ma A., Nishida Y., Suzuki K., Shigematsu I., and Saito N. Characteristics of plastic deformation by rotary-die equal-channel angular pressing. Scr. Mater. 52 (2005) 433-437
37. Cheong W.-J., Luan B.L., and Shoesmith D.W. Protective coating on Mg AZ91D alloy-the effect of electroless nickel (EN) bath stabilizers on corrosion behaviour of Ni-P deposit. Corros. Sci. 49 (2007) 1777-1798
38. 2 - and corresponding protection against corrosion by the coating. Corros. Sci. 51 (2009) 1181-1188
39. Huo H., Li Y., and Wang F. Corrosion of AZ91D magnesium alloy with a chemical conversion coating and electroless nickel layer. Corros. Sci. 46 (2004) 1467-1477