Simulating the structural evolution of droplets following shell formation

Chemical Engineering Science

Volumn 65, Issue 2, 2010, Pages 713-725

  Handscomb, C S ^a   Kraft, M ^a  

^a UNIVERSITY OF CAMBRIDGE   (United Kingdom)

Author keywords

Diffusion; Drying; Mathematical modelling and simulation; Particle formation; Population balance

Indexed keywords

COLLOIDAL SILICA; DROPLET DRYING; DRYING CONDITION; DRYING PROCESS; MATHEMATICAL MODELLING AND SIMULATION; MODEL FRAMEWORK; PARTICLE FORMATIONS; PARTICLE MORPHOLOGIES; POPULATION BALANCE; POPULATION BALANCES; SHELL FORMATION; SPATIALLY RESOLVED; STRUCTURAL EVOLUTION; SUSPENDED PARTICLES;

DEWATERING; DROP FORMATION; MATHEMATICAL MODELS; MORPHOLOGY; POPULATION STATISTICS; SILICA; SIMULATORS;

CURING;

EID: 72149095463     PISSN: 00092509     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ces.2009.09.025     Document Type: Article

References (69)

1. Abramzon B., and Sirignano W.A. Droplet vaporization model for spray combustion calculations. International Journal of Heat and Mass Transfer 32 9 (1989) 1605-1618 10.1016/0017-9310(89)90043-4
2. Abuaf, N., Staub, F., 1986. Drying of Liquid Solid Slurry Droplets. In: Drying '86, vol. 95. Hemisphere: Washington, DC.
3. Alamilla-Beltrán L., Chanona-Pérez J.J., Jiménez-Aparicio A.R., and Gutiérrez-López G.F. Description of morphological changes of particles along spray drying. Journal of Food Engineering 67 1-2 (2005) 179-184 10.1016/j.jfoodeng.2004.05.063
4. Asmatulu R. Enhancement of the dewetability characteristics of fine silica particles. Turkish Journal of Engineering and Environmental Sciences 26 6 (2002) 513-520
5. Audu T.O.K., and Jeffreys G.V. The drying of drops of particulate slurries. Transactions of the Institution of Chemical Engineers 53 (1975) 165-172
6. Bird R.B., Stewart W.E., and Lightfoot E.N. Transport Phenomena. first ed. (1960), Wiley, New York
7. Briggs L.J. Limiting negative pressure of water. Journal of Applied Physics 21 7 (1950) 721-722 10.1063/1.1699741
8. Brinker, C.J., 2006. Sol-gel processing of silica. In: Surfactant Science Series, vol. 131. CRC Press, Taylor & Francis Group, 6000 Broken Sound Parkway NW, Suite 300 Boca Raton, FL 33487-2742, USA, pp. 615-635 (Chapter 47).
9. Charlesworth D.H., and Marshall W.R. Evaporation from droplets containing dissolved solids. A.I.Ch.E. Journal 6 1 (1960) 9-23 10.1002/aic.690060104
10. Chen X.D., and Lin S.X.Q. Air drying of milk droplet under constant and time-dependent condition. A.I.Ch.E. Journal 51 6 (2005) 1790-1799
11. Cheong H., Jeffreys G., and Mumford C. A receding interface model for the drying of slurry droplets. A.I.Ch.E. Journal 32 8 (1986) 1334-1346 10.1002/aic.690320811
12. Coulson, J.M., Richardson, J.F., Backhurst, J.R., Harker, J.H., 1996. Coulson and Richardson's Chemical Engineering: Particle Technology and Separation Processes. In: Coulson and Richardson's Chemical Engineering, vol. 2, fourth ed., Butterworth-Heinemann Ltd.
13. Dalmaz N., Ozbelge H.O., Eraslan A.N., and Uludag Y. Heat and mass transfer mechanisms in drying of a suspension droplet: a new computational model. Drying Technology 25 2 (2007) 391-400
14. de Groot W.H., Adami L., and Moretti G.F. Manufacture of Modern Detergent Powders (1995), Herman de Groot Academic Publisher, Wassenaar
15. Dolinsky A.A. High-temperature spray drying. Drying Technology 19 5 (2001) 785-806 10.1081/DRT-100103770
16. El-Sayed T.M., Wallack D.A., and King C.J. Changes in particle morphology during drying of drops of carbohydrate solutions and food liquids. 1. Effect of composition and drying conditions. Industrial Engineering and Chemical Research 29 12 (1990) 2346-2354 10.1021/ie00108a007
17. Elperin T., and Krasovitov B. Evaporation of liquid droplets containing small solid particles. International Journal of Heat and Mass Transfer 38 12 (1995) 2259-2267 10.1016/0017-9310(94)00337-U
18. Farid M. A new approach to modelling of single droplet drying. Chemical Engineering Science 58 13 (2003) 2985-2993 10.1016/S0009-2509(03)00161-1
19. Ferrari G., Meerdink G., and Walstra P. Drying kinetics for a single droplet of skim-milk. Journal of Food Engineering 10 3 (1989) 215-230 10.1016/0260-8774(89)90027-7
20. Frey D.D., and King C.J. Experimental and theoretical investigation of foam-spray drying. 1. Mathematical model for the drying of foams in the constant-rate period. Journal of Industrial and Engineering Chemistry Fundamentals 25 4 (1986) 723-730 10.1021/i100024a041
21. Greenwald C.G., and King C.J. The effects of design and operating conditions on particle morphology for spray-dried foods. Journal of Food Process Engineering 4 3 (1981) 171-187 10.1111/j.1745-4530.1981.tb00254.x
22. Greenwald C.G., and King C.J. The mechanism of particle expansion in spray drying of foods. A.I.Ch.E. Symposium Series 78 218 (1982) 101-110
23. Handscomb, C.S., 2008. Simulating droplet drying and particle formation in spray towers. Ph.D. Thesis, University of Cambridge, Department of Chemical Engineering, November.
24. Handscomb C.S., Kraft M., and Bayly A.E. A new model for the drying of droplets containing suspended solids. Chemical Engineering Science 64 4 (2008) 628-637 10.1016/j.ces.2008.04.051
25. Handscomb C.S., Kraft M., and Bayly A.E. A new model for the drying of droplets containing suspended solids after shell formation. Chemical Engineering Science 64 2 (2009) 228-246 10.1016/j.ces.2008.10.019
26. Hecht J.P., and King C.J. Spray drying: influence of developing drop morphology on drying rates and retention of volatile substances. 1. Single drop experiments. Industrial and Engineering Chemical Research 39 6 (2000) 1756-1765 10.1021/ie9904652
27. Hecht J.P., and King C.J. Spray drying: influence of developing drop morphology on drying rates and retention of volatile substances. 2. Modeling. Industrial and Engineering Chemical Research 39 6 (2000) 1766-1774 10.1021/ie990464+
28. Hunter T.N., Jameson G.J., and Wanless E.J. Determination of contact angles of nanosized silica particles by multi-angle single-wavelength ellipsometry. Australian Journal of Chemistry 60 9 (2007) 651-655 10.1071/CH07133
29. Huntington D.H. The influence of the spray drying process on product properties. Drying Technology 22 6 (2004) 1261-1287 10.1081/DRT-120038730
30. Imre A.R. Binary liquids under absolute negative pressure. Periodica Polytechnica Chemical Engineering 44 1 (2000) 39-48
31. Kadja M., and Bergeles G. Modelling of slurry droplet drying. Applied Thermal Engineering 23 7 (2003) 829-844 10.1016/S1359-4311(03)00014-0
32. Keey R.B. Drying Principles and Practice. second ed. (1975), Pergamon Press
33. Kentish S., Davidson M., Hassan H., and Bloore C. Milk skin formation during drying. Chemical Engineering Science 60 3 (2005) 635-646 10.1016/j.ces.2004.08.033
34. Levi-Hevroni D., Levy A., and Borde I. Mathematical modelling of drying of liquid/solid slurries in steady state one-dimensional flow. Drying Technology 13 5-7 (1995) 1187-1201
35. Levy A., Levi-Hevroni D., and Borde I. Drying of wet solid particles in a steady state one-dimensional flame. Powder Technology 95 (1998) 15-23
36. Liang H., Shinohara K., Minoshimab H., and Matsushimab K. Analysis of constant rate period of spray drying of slurry. Chemical Engineering Science 56 6 (2001) 2205-2213 10.1016/S0009-2509(00)00505-4
37. Lin S.X.Q., and Chen X.D. A model for drying of an aqueous lactose droplet using the reaction engineering approach. Drying Technology 24 11 (2006) 1329-1334
38. Lin S.X.Q., and Chen X.D. A reaction engineering approach to modelling the cream whey protein concentrate droplet drying. Chemical Engineering and Processing 46 5 (2007) 437-443
39. Maris H., and Balibar S. Negative pressures and cavitation in liquid helium. Physics Today 53 2 (2000) 29-34 10.1063/1.882962
40. Masters K. Spray Drying Handbook. fifth ed. (1992), Longman Scientific and Technical, UK
41. Mezhericher M., Levy A., and Borde I. Theoretical drying model of single droplets containing insoluble or dissolved solids. Drying Technology 25 6 (2007) 1025-1032 10.1080/07373930701394902
42. Mezhericher M., Levy A., and Borde I. Heat and mass transfer of single droplet/wet particle drying. Chemical Engineering Science 63 1 (2008) 12-23
43. Mezhericher M., Levy A., and Borde I. Modelling of particle breakage during drying. Chemical Engineering and Processing: Process Intensification 47 8 (2008) 1404-1411
44. Mezhericher M., Levy A., and Borde I. Droplet-droplet interactions in spray drying by using 2d computational fluid dynamics. Drying Technology 26 3 (2008) 265-282
45. Minoshima H., Matsushima K., Liang H., and Shinohara K. Basic model of spray drying granulation. Journal of Chemical Engineering of Japan 34 4 (2001) 472-478 10.1252/jcej.34.472
46. Minoshima H., Matsushima K., Liang H., and Shinohara K. Estimation of diameter of granule prepared by spray drying of slurry with fast and easy evaporation. Journal of Chemical Engineering of Japan 35 9 (2002) 880-885 10.1252/jcej.35.880
47. Nešić S., and Vodnik J. Kinetics of droplet evaporation. Chemical Engineering Science 46 2 (1991) 527-537 10.1016/0009-2509(91)80013-O
48. Oakley D.E. Produce uniform particles by spray drying. Chemical Engineering Progress 10 1 (1997) 48-54
49. Ranz W.E., and Marshall W.R. Evaporation from drops part I. Chemical Engineering Progress 48 3 (1952) 141-146
50. Sano Y., and Keey R.B. The drying of a spherical particle containing colloidal material into a hollow sphere. Chemical Engineering Science 37 6 (1982) 881-889 10.1016/0009-2509(82)80176-0
51. Scherer G.W. Theory of drying. Journal of the American Ceramic Society 73 1 (1990) 3-14 10.1111/j.1151-2916.1990.tb05082.x
52. Scherer G.W. Bending of gel beams: method for characterizing elastic properties and permeability. Journal of Non-Crystalline Solids 142 (1992) 18-35 10.1016/S0022-3093(05)80003-1
53. Scherer G.W. Hydraulic radius and mesh size of gels. Journal of Sol-Gel Science and Technology 1 3 (1994) 285-291 10.1007/BF00486171
54. Schlünder E.U. Drying of porous material during the constant and the falling rate period: a critical review of existing hypotheses. Drying Technology 22 6 (2004) 1517-1532 10.1081/DRT-120038738
55. Seydel P., Blömer J., and Bertling J. Modeling particle formation at spray drying using population balances. Drying Technology 24 2 (2006) 137-146 10.1080/07373930600558912
56. Smith D.M., Scherer G.W., and Anderson J.M. Shrinkage during drying of silica gel. Journal of Non-Crystalline Solids 188 3 (1995) 191-206 10.1016/0022-3093(95)00187-5
57. Spalding D.B. Convective Mass Transfer. first ed. (1963), Edward Arnold
58. Tas, N.R., Mela, P., Kramer, T., Berenschot, A., Van den Berg, J.W., 2003. Water plugs in nanochannels under negative pressure. In: Proceedings of the Seventh International Conference on Miniaturized Chemical and Biochemical Analysis Systems, October, pp. 13-16.
59. Timoshenko S.P. Theory of Elastic Stability. first ed (1936), McGraw-Hill, New York
60. Tsapis N., Dufresne E., Sinha S., Riera C., Hutchinson J., Mahadevan L., and Weitz D. Onset of buckling in drying droplets of colloidal suspensions. Physical Review Letters 94 1 (2005) 018302 10.1103/PhysRevLett.94.018302
61. Van der Lijn, J., 1976. Simulation of heat and mass transfer in spray drying. Ph.D. Thesis, University of Wageningen.
62. Verhey J.G.P. Vacuole formation in spray powder particles 1. Air incorporation and bubble expansion. Netherlands Milk and Dairy Journal 26 (1972) 186-202
63. Walton D., and Mumford C. The morphology of spray-dried particles-the effect of process variables upon the morphology of spray-dried particles. Chemical Engineering Research and Design 77 (1999) 442-460 10.1205/026387699526296
64. Walton D., and Mumford C. Spray dried products-characterization of particle morphology. Chemical Engineering Research and Design 77 (1999) 21-37 10.1205/026387699525846
65. Werner S.R.L., Edmonds R.L., Jones J.R., Bronlund J.E., and Paterson J.A.H. Single droplet drying: transition from the effective diffusion model to a modified receding interface model. Powder Technology 179 3 (2008) 184-189 10.1016/j.powtec.2007.06.009
66. Werner, S.R.L., Edmonds, R.L., Jones, J.R., Paterson. J.A.H., 2008b. Single droplet drying. 2. Maltodextrin DE5 drying kinetics and mathematical model validation, personal communication.
67. Werner, S.R.L., Edmonds, R.L., Paterson, A.H.J., Bronllund, J.E., Jones, J.R, 2008c. Single droplet drying. 1. Review of major model types, controlling mechanisms and the constant internal temperature assumption, personal communication.
68. Whitaker S. Simultaneous heat mass and momentum transfer in porous media: a theory of drying. Advances in Heat Transfer 13 (1977) 119-203
69. Wijlhuizen A.E., Kerkhof P.J.A.M., and Bruin S. Theoretical study of the inactivation of phosphatase during spray drying of skim-milk. Chemical Engineering Science 34 5 (1979) 651-660 10.1016/0009-2509(79)85110-6