Rheology of fiber reinforced cementitious materials: classification and prediction

Cement and Concrete Research

Volumn 40, Issue 2, 2010, Pages 226-234

  Martinie, Laetitia ^a   Rossi, Pierre ^a   Roussel, Nicolas ^a  

^a UNIVERSITÉ PARIS EST   (France)

Author keywords

Aggregate (D); Fiber reinforcement (E); Fresh concrete (A); Mixture proportioning (A); Rheology (A)

Indexed keywords

CEMENT PASTE; CEMENTITIOUS MATERIALS; CONTACT NETWORKS; FIBER REINFORCED; FIBER REINFORCEMENT; FRESH CONCRETE; MIX DESIGNS; MIX PROPORTIONS; MIXTURE PROPORTIONING; ORDERS OF MAGNITUDE; PHYSICAL PHENOMENA; RHEOLOGY (A); RIGID FIBERS; SIMPLE MODEL; SPHERICAL INCLUSION; STRAIGHT FIBERS; ULTRA-HIGH-PERFORMANCE FIBER-REINFORCED CONCRETE;

CEMENTS; ELASTICITY; FIBER REINFORCED MATERIALS; FIBERS; MIXTURES; PLASTICITY; REINFORCED CONCRETE; REINFORCEMENT; RHEOLOGY; VISCOSITY;

YIELD STRESS;

AGGREGATE; ELASTICITY; FIBERS; MIXTURES; PLASTICITY; REINFORCED CONCRETE; RHEOLOGY; VISCOSITY;

EID: 72049127251     PISSN: 00088846     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cemconres.2009.08.032     Document Type: Article

References (58)

1. Swamy R.N. Fiber reinforcement of cement and concrete. Mater. Struct. 8 45 (1975) 235-254
2. S. Grünewald, Performance-based design of self-compacting fiber reinforced concrete, PhD-thesis, Section of Structural and Building Engineering, Delf University of Technology, Netherlands (2004).
3. Grünewald S., and Walraven J.C. Parameter-study on the influence of steel fibers and coarse aggregate content on the fresh properties of self-compacting concrete. Cem. Concr. Res. 31 12 (2001) 1793-1798
4. Dhonde H.B., Mo Y.L., Hsu T.T.C., and Vogel J. Fresh and hardened properties of self-consolidating fiber-reinforced concrete. ACI. Mater. J. 104-M54 (2007) 491-500
5. Rossi P. Mechanical behaviour of metal-fibre reinforced concretes. Cem. Concr. Compos. 14 1 (1992) 3-16
6. Soroushian P., and Bayasi M.Z. Fiber-type effect on the performance of steel fiber reinforced concrete. ACI. Mater. J. 88 2 (1991) 129-134
7. Li S.H., Shah S.P., Li Z., and Mura T. Micromechanical analysis of multiple fracture and evaluation of debonding behavior for fiber-reinforced composites. Int. J. Solids Struct. 30 11 (1993) 1429-1459
8. Soroushian P., and Lee C.D. Distribution and orientation of fibers in steel fiber reinforced concrete. ACI. Mater. J. 87 5 (1990) 433-439
9. Akkaya Y., Peled A., and Shah S.P. Parameters related to fiber length and processing in cementitious composites. Mater. Struct. 33 (2000) 515-524
10. Hughes B.P., and Fattuhi N.I. Predicting the flexural strength of steel and polypropylene fiber-reinforced cement-based beams. Composites 8 1 (1977) 57-61
11. Hughes B.P., and Fattuhi N.I. Improving the toughness of high strength cement paste with fiber reinforcement. Composites 7 3 (1976) 185-188
12. Banthia N., and Trottier J.F. Deformed steel fiber-cementitious matrix bond under impact. Cem. Concr. Res. 21 1 (1991) 158-168
13. Ozyurt N., Mason T.O., and Shah S.P. Non-destructive monitoring of fiber orientation using AC-IS: an industrial-scale application. Cem. Concr. Res. 36 9 (2006) 1653-1660
14. Gray R.J., and Johnston C.D. The effect of matrix composition on fiber/matrix interfacial bond shear strength in fiber-reinforced mortar. Cem. Concr. Res. 14 2 (1984) 285-296
15. Rossi P., Acker P., and Malier Y. Effect of steel fibers at two different stages: the material and the structure. Mater. Struct. 20 (1987) 436-439
16. Mohammadi Y., Singh S.P., and Kaushik S.K. Properties of steel fibrous concrete containing mixed fibers in fresh and hardened state. Constr. Build. Mater. 22 5 (2008) 956-965
17. Hughes B.P., and Fattuhi N.I. The workability of steel-fiber-reinforced concrete. Mag. Concr. Res. 28 9 (1976) 157-161
18. Rossi P., and Harrouche N. Mix design and mechanical behaviour of some steel-fibre-reinforced concretes used in reinforced concrete structures. Mater. Struct. 23 (1990) 256-266
19. Bayasi M.Z., and Soroushian P. Effect of steel fiber reinforcement on fresh mix properties of concrete. ACI. Mater. J. 89 4 (1992) 369-374
20. Johnston C.D. Proportioning, mixing and placement of fiber-reinforced cements and concretes. In: Bartos P.J.M., Marrs D.L., and Cleland D.J. (Eds). Production Methods and Workability of Concrete (1996), RILEM Symposium, E&FN Spon, London 155-179
21. P. Groth, Fiber reinforced concrete - fracture mechanics methods applied on self-compacting concrete and energetically modified binders, PhD-thesis, Department of Civil and Mining Engineering, Lulea University of Technology (2004).
22. Groth P., and Nemegeer D. The use of steel fiber in self compacting concrete. In: Skarendahl A., and Petersson O. (Eds). Self-compacting Concrete, RILEM Symposium Stockholm (1999), RILEM publications, Cachan 497-508
23. Bui V.K., Geiker M.R., and Shah S.P. In: Naaman A.E., and Reinhardt H.W. (Eds). Rheology of Fiber-reinforced Cementitious Materials (2003), RILEM Publications (HPFRCC4, Michigan 221-231
24. Ding Y., Liu S., Zhang Y., and Thomas A. The investigation on the workability of fiber cocktail reinforced self-compacting high performance concrete. Constr. Build. Mater. 22 7 (2008) 1462-1470
25. Ferrara L., Park Y.D., and Shah S.P. A method for mix-design of fiber-reinforced self-compacting concrete. Cem. Concr. Res. 37 6 (2007) 957-971
26. Banfill P.F.G., Starrs G., Derruau G., McCarter W.J., and Chrisp T.M. Rheology of low carbon fiber content reinforced cement mortar. Cem. Concr. Compos. 28 9 (2006) 773-780
27. Roussel N. Correlation between yield stress and slump: comparison between numerical simulations and concrete rheometer results. Mater. Struct. 39 4 (2006) 501-509
28. Roussel N., Stefani C., and Le Roy R. From mini cone test to Abrams cone test: measurement of cement based materials yield stress using slump tests. Cem. Concr. Res. 35 5 (2005) 817-822
29. Roussel N., and Coussot P. "Fifty-cent rheometer" for yield stress measurements: from slump to spreading flow. J. Rheol. 49 3 (2005) 705-718
30. Swamy R.N., and Mangat P.S. Influence of fiber-aggregate interaction on some properties of steel fiber reinforced concrete. Mater. Struct. 7 41 (1974) 307-314
31. A.G. Kooiman, Modeling steel fiber reinforced concrete for structural design, PhD thesis, Stevin Laboratory, Delft University of Technology (2000).
32. I. Markovic, High-performance hybrid-fiber concrete - development and utilisation, PhD thesis, Department of Underground Infrastructure, Delft University of Technology (2006).
33. Stähli P., and van Mier J.G.M. Manufacturing, fiber anisotropy and fracture of hybrid fiber concrete. Eng. Fract. Mech. 74 1-2 (2007) 223-242
34. Folgar F., and Tucker C.L. Orientation behavior of fibers in concentrated suspensions. J. Reinf. Plast. Compos. 3 (1984) 98-119
35. Flatt R. Towards a prediction of superplasticized concrete rheology. Mater. Struct. 27 269 (2004) 289-300
36. Toutou Z., and Roussel N. Multi scale experimental study of concrete rheology: from water scale to gravel scale. Mater. Struct. 39 2 (2006) 189-199
37. Yammine J., Chaouche M., Guerinet M., Moranville M., and Roussel N. From ordinary rheology concrete to self compacting concrete: a transition between frictional and hydrodynamic interactions. Cem. Concr. Res. 38 7 (2008) 890-896
38. Krieger I.M., and Dougherty T.J. A mechanism for non-Newtonian flow in suspensions of rigid spheres. Trans. Soc. Rheol. 3 (1959) 137-152
39. Geiker M.R., Brandl M., Thrane L.N., and Nielsen L.F. On the effect of coarse aggregates fraction and shape on the rheological properties of self compacting concrete, cement. Concrete and Aggregates 24 1 (2002) 3-6
40. Mahaut F., Mokeddem S., Château X., Roussel N., and Ovarlez G. Effect of coarse particle volume fraction on the yield stress and thixotropy of cementitious materials. Cem. Concr. Res. 38 11 (2008) 1276-1285
41. Onoda G.Y., and Liniger E. Random loose packings of uniform spheres and the dilatancy onset. Phys. Rev. Lett. 64 (1990) 2727-2730
42. Roussel N. A theoretical frame to study stability of fresh concrete. Mater. Struct. 39 (2006) 81-91
43. De Larrard F. Concrete mixture proportioning, a scientific approach. In: Mindess, and Bentur A. (Eds). Modern Concrete Technology Series No 9 (1999), E & FN Spon, London
44. Philipse A.P. The random contact equation and its implications for (Colloidal) rods in packings, suspensions, and anisotropic powders. Langmuir 12 (1996) 1127-1133
45. Nardin M., and Papirer E. Contribution à l'etude des empilements au hasard de fibres et/ou de particules sphériques. Powder Tech. 44 (1985) 131-140
46. Roussel N. A thixotropy model for fresh fluid concretes: theory, validation and applications. Cem. Concr. Res. 36 10 (2006) 1797-1806
47. Roussel N. Steady and transient flow behaviour of fresh cement pastes. Cem. Concr. Res. 35 9 (2005) 1656-1664
48. Rossi P. Steel fibre reinforced concrete (SFRC): an example of French research. ACI. Mater. J. 91 3 (1994) 273-279
49. Barthos P.J.M., and Hoy C.W. Interaction of particles in fibre reinforced concrete. In: Barthos P.J.M., Marrs D.L., and Cleland D.J. (Eds). Production Methods and Workability of Concrete (1996), E&FN Spon, London 451-461
50. Kuder K.G., Ozyurt N., Mu E.B., and Shah S.P. Rheology of fiber-reinforced cementitious materials. Cem. Concr. Res. 37 2 (2007) 191-199
51. C. Magureanu, B. Heghes, O. Corbu, H. Szilagy, I. Sosa, Behaviour of high and ultra high performance fibre reinforced concrete, in: Proceedings of the 8th International Symposium on Utilization of High Strength and High Performance Concretes, Tokyo, 2008, pp. 353-356.
52. Y. Sato, W. Pansuk, J.A. Den Uilj, J.C. Walraven, Shear capacity of high performance fibre reinforced concrete I-beams, in: Proceedings of the 8th International Symposium on Utilization of High Strength and High Performance Concretes, Tokyo, 2008, pp. 369-376.
53. N. Sogabe, S. Yamanobe, T. Kono, Cyclic loading of high-seismic-performance RC piers with Ultra-High-Strength Fiber-Reinforced Concrete precast forms, in: Proceedings of the 8th International Symposium on Utilization of High Strength and High Performance Concretes, Tokyo, 2008, pp. 445-450.
54. M. Sakurada, H. Ohyama, T. Mori, Application of High Strength Fiber Reinforced Mortar to prestressed concrete structures, in: Proceedings of the 8th International Symposium on Utilization of High Strength and High Performance Concretes, Tokyo, 2008, pp. 451-456.
55. T. Mizutani, T. Yamada, N. Fujikura, H. Iwasaki, S. Tanaka, Development of manhole circular block using ultra high strength fiber reinforced concrete, in: Proceedings of the 8th International Symposium on Utilization of High Strength and High Performance Concretes, Tokyo, 2008, pp. 473-480.
56. S.T. Kang, J.J. Park, J.H. Lee, S.W. Kim, The effect of the siliceous filler in ultra high strength concrete with steel fibers, in: Proceedings of the 8th International Symposium on Utilization of High Strength and High Performance Concretes, Tokyo, 2008, pp. 563-568.
57. Rossi P. Les bétons de fibres métalliques (1998), Presses des Ponts et Chaussées, Paris
58. Parant E., Rossi P., and Boulay C. Fatigue behavior of a multi-scale cement composite. Cem. Concr. Res. 37 (2007) 264-269