Microstructures and mechanical responses of powder metallurgy non-combustive magnesium extruded alloy by rapid solidification process in mass production

Materials and Design

Volumn 31, Issue 3, 2010, Pages 1540-1546

  Kondoh, Katsuyoshi ^a   Hamada, EL Sayed Ayman ^a   Imai, Hisashi ^a   Umeda, Junko ^a   Jones, Tyrone ^b  

^a OSAKA UNIVERSITY   (Japan)

^b U S ARMY RESEARCH LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ATOMIZATION PROCESS; CAST INGOTS; EXTRUDED ALLOYS; FINE MICROSTRUCTURE; GAS ATMOSPHERE; GREEN COMPACTS; HOT EXTRUSION; INTERMETALLIC COMPOUNDS; MASS PRODUCTION; MASS PRODUCTION PROCESS; MATRIX; MECHANICAL RESPONSE; MG ALLOY; MICROSTRUCTURE OBSERVATION; NON-COMBUSTIBLE MAGNESIUM ALLOY; RELATIVE DENSITY; ROOM TEMPERATURE; SOLIDIFICATION RATE; WATER ATOMIZATION; WROUGHT ALLOYS;

ALLOYS; ALUMINUM; ALUMINUM POWDER METALLURGY; ATOMIZATION; CALCIUM; CALCIUM ALLOYS; CRYSTALLIZATION; DROP FORMATION; DYNAMIC RECRYSTALLIZATION; EXTRUSION; EXTRUSION DIES; JETS; MACHINE TOOLS; MAGNESIUM; MAGNESIUM ALLOYS; MAGNESIUM POWDER; MANGANESE; MANGANESE COMPOUNDS; MECHANICAL PROPERTIES; METALLURGY; MICROSTRUCTURE; PRODUCTION ENGINEERING; SEMICONDUCTING INTERMETALLICS; TENSILE STRENGTH; YIELD STRESS;

RAPID SOLIDIFICATION;

EID: 72049092270     PISSN: 02641275     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matdes.2009.10.001     Document Type: Article

References (23)

1. Mordike B.L., and Ebert T. Magnesium properties-applications-potential. Mater Sci Eng A 302 (2001) 37-45
2. Pepoktch N.J. The cleavage strength of polycrystals. J Iron Steel Inst 174 (1953) 25-28
3. Andersson P., Caceres C.H., and Koike J. Hall-Petch parameters for tension and compression in cast Mg. Mater Sci Forum 419-422 (2003) 123-128
4. Chen Y., Wang Q., Peng J., Zhai C., and Ding W. Effects of extrusion ratio on the microstructure and mechanical properties of AZ31 Mg alloy. J Mater Process Tech 182 (2007) 281-285
5. Iwahashi Y., Wang J.T., Horita Z., and Langdon T.G. Principle of equal-channel angular pressing for the processing of ultra-fine grained materials. Scripta Mater 35 (1996) 143-146
6. Saito Y., Tsuji N., Utsunomiya H., Sakai T., and Hong R.G. Ultra-fine grained bulk aluminum produced by accumulative roll-bonding (ARB) process. Scripta Mater 39 9 (1998) 1221-1227
7. Kondoh K., and Aizawa T. Environmentally benign fabricating process of magnesium alloy by cyclical plastic working in solid-state. Mater Trans 44 (2003) 1276-1283
8. Kondoh K., Kawabata K., and Oginuma H. Mechanical properties and texture of hot extruded magnesium alloys via RCP process in using coarse raw powder magnesium technology 2007 (2007), TMS p. 433-6
9. Perez-Prado M.T., del Valle J.A., and Ruano O.A. Grain refinement of Mg-Al-Zn alloys via accumulative roll bonding. Scripta Mater 51 (2004) 1093-1097
10. Kusy M., Grgac P., Behulova M., Vyrostkova A., and Miglierini M. Morphological variants of carbides of solidification origin in the rapidly solidified powder particles of hypereutectic iron alloy. Mater Sci Eng A 375-377 (2004) 599-603
11. Rawers J., Sauer W., and German R. Planar solidification of rapidly solidified powders. J Mater Sci Lett 16 (1993) 1327-1329
12. Wright R.N., and Anderson I.E. Age-hardening behavior of dynamically consolidated rapidly solidified Cu-2%Zr powder. Mater Sci Eng A 114 (1989) 167-172
13. Kawamura Y., Hayashi K., Inoue A., and Masumoto T. Rapidly solidified powder metallurgy Mg97Zn1Y2 alloys with excellent tensile yield strength above 600 MPa. Mater Trans 42 (2001) 1172-1176
14. Kato H., Yubuta K., Louzguine D.V., Inoue A., and Kim H.S. Influence of nanoprecipitation on strength of Cu60Zr30Ti10 glass containing μm-ZrC particle reinforcements. Scripta Mater 51 (2004) 577-581
15. Noh S.J., Jung T.K., Lee D.S., and Kim M.S. Microstructure and compressive behavior of Al-base amorphous/nanocrystalline alloys fabricated by powder forging. Mater Sci Eng A 449-451 (2007) 799-803
16. Kim T.S., Lee J.K., Kim H.J., and Bae J.C. Consolidation of Cu54Ni6Zr22Ti18 bulk amorphous alloy powders. Mater Sci Eng A 402 (2005) 228-233
17. Sakamoto M., Akiyama S., Hagio T., and Ogi K. Control of oxidation surface film and suppression of ignition of molten Mg-Ca Alloy by Ca Addition. J Jpn Foundry Eng Soc 69 (1997) 227-233
18. Nishida S., and Motomura I. Estimation of heat transfer coefficient and temperature transition on melt drag process of AZ31 magnesium alloy by heat transfer and solidification analysis. J Jpn Inst Light Metals 58 (2008) 439-442
19. Wei L.Y., and Dunlop G.L. The solidification behavior of Mg-Al-rare earth alloys. J Alloys Compd 232 (1996) 264-268
20. 2. J Nucl Mater 48 (1973) 277-286
21. Anyanwu I.A., Gokan Y., Suzuki A., Kamado S., Kojima Y., Takeda S., et al. Effect of substituting cerium-rich mischmetal with lanthanum on high temperature properties of die-cast Mg-Zn-Al-Ca-RE alloys. Mater Sci Eng A 380 (2004) 93-99
22. Chandrasekaran M., and John Y.M.S. Effect of materials and temperature on the forward extrusion of magnesium alloys. Mater Sci Eng A 381 (2004) 308-319
23. Zhang J.H., Hai Feng L., Sun W., Lu H.Y., Tang D.X., and Jian M. Influence of Structure and ionic radius on solubility limit in the Mg-Re systems. Mater Sci Forum 561-565 (2007) 143-146